PL1-F25-E8-S - Inductive sensor | PL1-F25-E8-S - Quad Industry GmbH
Артикул: PL1-F25-E8-S
Наименование: Inductive sensor | PL1-F25-E8-S
Производитель: Pepperl-Fuchs
|
|
- For installation in housing
- PL1... with valve connection
- Valve LEDs disconnectable (wire jumper)
- Satisfies machinery directive
Datasheet as PDF in following languages: Technical Data: PL1-F25-E8-S| General specifications | | Switching element function | PNP Dual NO | | Rated operating distance | 3 mm | | Installation | flush mountable | | Output polarity | DC | | Assured operating distance | 0 ... 2.43 mm | | Reduction factor rAl | 0.5 | | Reduction factor r304 | 1 | | Reduction factor rSt37 | 1.1 | | Nominal ratings | | Operating voltage | 10 ... 30 V DC | | Switching frequency | 0 ... 100 Hz | | Hysteresis | typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 200 mA | | Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 В°C | | No-load supply current | ≤ 25 mA | | Operating voltage display | LED, green | | Switching state indication | LED, yellow | | Valve status indication | LED, yellow | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) | | Mechanical specifications | | Core cross-section (system side) | up to 2.5 mm2 | | Core cross-section (valve side) | up to 2.5 mm2 | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP20 | | Note | Installation in housing |
|
Назад в раздел
|
