NJ2-FD1-E2-1.875-V1-T - Inductive sensor | NJ2-FD1-E2-1.875-V1-T - Quad Industry GmbH
Артикул: NJ2-FD1-E2-1.875-V1-T
Наименование: Inductive sensor | NJ2-FD1-E2-1.875-V1-T
Производитель: Pepperl-Fuchs
|
|
- 3-wire DC
- Weld Immune
- Sensing range 2 mm
- 5000 psi rating
- High temperature model
Datasheet as PDF in following languages: Technical Data: NJ2-FD1-E2-1.875-V1-TGeneral specifications | Switching element function | PNP NO | Rated operating distance | 2 mm | Installation | flush | Output polarity | DC NO | Assured operating distance | 0 ... 1.62 mm | Reduction factor rAl | 0.4 | Reduction factor r304 | 0.85 | Nominal ratings | Operating voltage | 10 ... 30 V DC | Switching frequency | ≤ 250 Hz | Hysteresis | 10 ... 20 % 15 typ. | Short-circuit protection | yes | Voltage drop | ≤ 2 V | Operating current | ≤ 100 mA | Off-state current | < 100 µA | No-load supply current | ≤ 35 mA | Mag. Field strength, AC fields | 250 mT | Mag. Field strength, DC fields | 100 mT | Limit data | Operating pressure dynamically | 5000 psi | Indicators/operating means | LED green | Power on | LED yellow | Output status | Standard conformity | Standards | EN 60947-5-2 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | Ambient conditions | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) on probe -25 ... 85 В°C (-13 ... 185 В°F) on sensor | Mechanical specifications | Protection degree | IP67 | Material | Housing: zinc Probe: stainless steel Flange: steel | Note | X = 1.875 in (47.6 mm)
|
|
Назад в раздел
|