NJ25/40+U1+E2-V1 - Inductive sensor | NJ25/40+U1+E2-V1 - Quad Industry GmbH
Артикул: NJ25/40+U1+E2-V1
Наименование: Inductive sensor | NJ25/40+U1+E2-V1
Производитель: Pepperl-Fuchs
|
|
Datasheet as PDF in following languages: Technical Data: NJ25/40+U1+E2-V1| General specifications | | Switching element function | PNP NO | | Rated operating distance | 25 mm / 40 mm selectable | | Installation | non-flush | | Assured operating distance | 0 ... 12.15 mm / 0 ... 32.4 mm | | Reduction factor rAl | 0.3 | | Reduction factor rCu | 0.4 | | Reduction factor r304 | 0.8 | | Nominal ratings | | Operating voltage | 10 ... 60 V | | Switching frequency | 0 ... 150 Hz | | Hysteresis | 1 ... 10 typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 2.8 V | | Operating current | 0 ... 200 mA | | Off-state current | 0 ... 0.5 mA typ. 0.01 mA | | No-load supply current | ≤ 10 mA | | Operating voltage display | LED, green | | Switching state indication | LED, yellow | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Core cross-section | - | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP67 |
|
Назад в раздел
|
