NJ30P+U4+A2-V1 - Inductive sensor | NJ30P+U4+A2-V1 - Quad Industry GmbH
Артикул: NJ30P+U4+A2-V1
Наименование: Inductive sensor | NJ30P+U4+A2-V1
Производитель: Pepperl-Fuchs
|
|
- 4-wire DC
- Surface mount
- Sensing range 30 mm
Datasheet as PDF in following languages: Technical Data: NJ30P+U4+A2-V1| General specifications | | Switching element function | PNP NO/NC | | Rated operating distance | 30 mm | | Installation | non-flush | | Output polarity | Selective | | Assured operating distance | 0 ... 24.3 mm | | Reduction factor rAl | 1 | | Reduction factor rCu | 1 | | Reduction factor rSt37 | 0 | | Reduction factor rBrass | 0 | | Nominal ratings | | Operating voltage | 10 ... 30 V | | Switching frequency | 0 ... 150 Hz | | Hysteresis | typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 200 mA | | No-load supply current | ≤ 20 mA | | Operating voltage display | LED, green | | Switching state indication | LED, yellow | | Standard conformity | | Standards | IEC / EN 60947-5-2:2004 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Core cross-section | up to 2.5 mm2 | | Housing material | PBT/metal | | Sensing face | PBT | | Protection degree | IP68 |
|
Назад в раздел
|
