NCN3-F31-B3B-V1 - Inductive sensor | NCN3-F31-B3B-V1 - Quad Industry GmbH
Артикул: NCN3-F31-B3B-V1
Наименование: Inductive sensor | NCN3-F31-B3B-V1
Производитель: Pepperl-Fuchs
|
|
- Direct mounting on standard actuators
- A/B slave with extended addressing possibility for up to 62 slaves
- Mode of operation, programmable
- Protection degree IP67
- Communication monitoring, turn-off
Datasheet as PDF in following languages: Technical Data: NCN3-F31-B3B-V1| Product Description | | Valve positioner and valve control module | | General specifications | | Switching element function | programmable | | Rated operating distance | 3 mm | | Installation | flush mountable | | Output polarity | AS-Interface | | Assured operating distance | 0 ... 2.43 mm | | Reduction factor rAl | 0.5 | | Reduction factor rCu | 0.45 | | Reduction factor r304 | 1 | | Reduction factor rSt37 | 1.2 | | Slave type | A/B slave | | AS-Interface specification | V3.0 | | Required master specification | ≥ V2.1 | | Nominal ratings | | Operating voltage | 26.5 ... 31.9 V via AS-i bus system | | Switching frequency | 0 ... 100 Hz | | No-load supply current | ≤ 35 mA | | Functional safety related parameters | | MTTFd | 842 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Indicators/operating means | | LED IN | switching state (input); LED yellow | | Compliance with standards and directives | | Standard conformity | | | Electromagnetic compatibility | EN 50295:1999-10
| | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Connection (system side) | connector M12 x 1, 4-pin | | Protection degree | IP67 | | Material | | | Housing | PBT |
|
Назад в раздел
|
