| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
A1D00119822
|
COMPONENT FEEDER CHANGEOVER TAB LE, HEIGHT 830-950MM, WITH INTE GRATED REEL CONTAINER. FOR SIPL ACE D1/D2.COMPONENT FEEDER CAPA CITY (TYP S): 15 SLOTS. WITH WH EELS FOR MINIMIZATION OF SETUP TIMES. |--| A1D00119822
|
Siemens
|
|
A1D00116942
|
THIS PACKAGE IS NECESSARY FOR T HE UPGRADE FROM SMV TO SIPLACE SETUP CENTER 2.2. THE CURRENT S OFTWARE VERSIONS 407.503 AND 50 5, THE COMPONENT LEVEL INDICATO R SOFTWARE, THE COMPONENT VERIF ICATION SOFTWARE AND THE TRACEA BILITY (XML-INTERFACE) ARE CONT ENTS OF THE PACKAGE. THIS ITEM IS REQUIRED ONE TIME PER FACTOR Y FOR SIPLACE S/F, HS-XX, HF OR HF/3. PLEASE NOTE: THE ITEMS F OR INSTALLATION OF SPLICE DETEC TION ARE NOT INCLUDED. |--| A1D00116942
|
Siemens
|
|
A1D00119825
|
WAFFLE-PACK CHANGER FOR SIPLACE D1(LOCATION 1) / D3 (LOCATION 2) COMBINED WITH FIXED COMPONEN T TABLE FOR TRANSPORT HEIGHT 83 0/900/930/950MM. SOFRTWARE REQU IREMENTS FOR D1: PROGRAMMING SY STEM SIPLACE PRO 5.0, STATIONSO FTWARE 604. SOFTWARE REQUIREMEN TS FOR D3: PROGRAMMING SYSTEM S IPLACE PRO 5.2, STATIONSOFTWARE 605. STORAGE CAPACITY OF 28 WT C (WAFFLE PACK TRAY CARRIER), M AX. SIZE OF WAFFLE PACK TRAY 34 1MM X 235MM X 15MM. TRAY CHANGE OVER TIME: 1.9S (OVER 1 LEVEL). 10,5 FEEDER LOCATIONS REQUIRED FOR WAFFLE-PACK CHANGER. SUPPL Y VOLTAGES: 3-204/230V, 3-380/4 00/415V. |--| A1D00119825
|
Siemens
|
|
A1D00119821
|
COMPONENT FEEDER CHANGEOVER TAB LE, HEIGHT 830-950MM, WITH INTE GRATED REEL CONTAINER. FOR SIPL ACE D4.COMPONENT FEEDER CAPACIT Y (TYP S): 12 SLOTS FOR 36 8MM TAPES, WHEN USING 3X8MM FEEDER. WITH WHEELS FOR MINIMIZATION O F SETUP TIMES. |--| A1D00119821
|
Siemens
|
|
A1D00119833
|
SIPLACE PICK & PLACE HEAD FOR S IPLACE D1 PLACEMENT STATION. TH E PICK & PLACE HEAD CONSIST OF ONE PICK AND PLACE MODULE. INCL UDED IN DELIVERY ARE THE DIGITA L STATIONARY CAMERA (TYPE 36) A ND 1 NOZZLE CHANGER WITH 2 STAN DARD NOZZLE MAGAZINE (ITEM NO.: 03048676) FOR EACH 2 NOZZLES AN D 1 SOKO NOZZLE MAGAZINE (ITEM NO.:03048639). WITH THIS HEAD A COMPONENT RANGE FROM 0603 TO 85MM X 85MM COULD BE PLACED. LA RGER COMPONENTS HAVE TO BE TEST ED IN OUR APPLICATION LAB BEFOR E TO GET A CONFIRMATION FOR A C OMPONENT RANGE UP TO 200MM X 12 5MM. A MAXIMUM COMPONENT HEIGH T OF 19MM IS POSSIBLE. MAX. COM PONENT WEIGHT: 30GR. (STANDARD) |--| A1D00119833
|
Siemens
|
|
A1D00119826
|
WAFFLE-PACK CHANGER FOR SIPLACE X2 (LOCATION 2/4) / X3 (LOCATI ON 2) COMBINED WITH FIXED COMPO NENT TABLE FOR TRANSPORT HEIGHT 830/900/930/950MM. SOFTWARE RE QUIREMENTS FOR X2/X3: PROGRAMMI NG SYSTEM SIPLACE PRO 5.2, STAT IONSOFTWARE 605. HARDWARE REQUI REMENTS FOR X2/X3: SIPLACE X/D 3 INTERFACE BE-WAGEN HF/D3 (119 724). STORAGE CAPACITY OF 28 WT C (WAFFLE PACK TRAY CARRIER), M AX. SIZE OF WAFFLE PACK TRAY 34 1MM X 235MM X 15MM. TRAY CHANGE OVER TIME: 1.9S (OVER 1 LEVEL). 10,5 FEEDER LOCATIONS REQUIRED FOR WAFFLE-PACK CHANGER. SUPPL Y VOLTAGES: 3-204/230V, 3-380/4 00/415V. |--| A1D00119826
|
Siemens
|
|
A1D00116961-01
|
PROTECTION SHIELD FOR SIPLACE P LACEMENT STATIONS 1 FEEDER LOCA TION. |--| A1D00116961-01 |--| A1D0011696101
|
Siemens
|
|
A1D00119834
|
SIPLACE PICK & PLACE HEAD FOR S IPLACE D1 PLACEMENT STATION. TH E PICK & PLACE HEAD CONSIST OF ONE PICK AND PLACE MODULE. INCL UDED IN DELIVERY ARE THE DIGITA L STATIONARY CAMERA (TYPE 36) A ND 1 NOZZLE CHANGER WITH 2 STAN DARD NOZZLE MAGAZINE (ITEM NO.: 03048676) FOR EACH 2 NOZZLES AN D 1 SOKO NOZZLE MAGAZINE (ITEM NO.:03048639). WITH THIS HEAD A COMPONENT RANGE FROM 0603 TO 85MM X 85MM COULD BE PLACED. LA RGER COMPONENTS HAVE TO BE TEST ED IN OUR APPLICATION LAB BEFOR E TO GET A CONFIRMATION FOR A C OMPONENT RANGE UP TO 200MM X 12 5MM. A MAXIMUM COMPONENT HEIGH T OF 19MM IS POSSIBLE. MAX. CO MPONENT WEIGHT: 30GR. (STANDARD |--| A1D00119834
|
Siemens
|
|
A1D00119840
|
MODULAR SINGLE CONVEYOR D1/D2 W ITH FIXED RAIL RIGHT/LEFT (CHOO SE IN CONFIGURATION 119626/1196 28) FOR PLACEMENT STATION D1/D2 . ITEM HAS TO BE ORDERED WITH T HE PLACEMENT STATION. WITH THIS NEW TRANSPORT THE PCB IS CLAMP ED TO TOP SIDE, THAT MEANS THE PLACEMENT LEVEL IS ALWAYS ON TH E SAME HEIGHT, INDEPENDENT FROM PCB-THICKNESS. THE NEW TRANSPO RT OFFERS SHORT PCB CHANGE TIME AND THE POSSIBILITY TO CHANGE EASILY THE FIXED RAIL RIGHT <,->, LEFT. PCB-DIMENSIONS: L X W, S TANDARD: 50MM X 50MM TO 460MM X 460MM, EXTENDED DIMENSIONS WIT H THE LONG BOARD OPTION (ITEM N O.:119872): 50MM X 80MM TO 610M M X 460MM. |--| A1D00119840
|
Siemens
|
|
A1D00119834-01
|
SIPLACE PICK & PLACE HEAD FOR S IPLACE D1 PLACEMENT STATION. TH E PICK &PLACE HEAD CONSIST OF O NE PICK AND PLACE MODULE. INCLU DED IN DELIVERYARE THE DIGITAL STATIONARY CAMERA (TYPE 36) AND 1 NOZZLE CHANGER WITH 3STANDAR D NOZZLE MAGAZINE (ITEM NO.:030 48676) FOR EACH 2 NOZZLES AND 1 SOKO NOZZLE MAGAZINE (ITEM NO.: 03048639). WITH THIS HEAD A CO MPONENTRANGE FROM 0402 TO 85MM X 85MM COULD BE PLACED. LARGER COMPONENTS HAVETO BE TESTED IN OUR APPLICATION LAB BEFORE TO G ET A CONFIRMATION FOR ACOMPONEN T RANGE UP TO 200MM X 125MM. A MAXIMUM COMPONENT HEIGHT OF 19 MM IS POSSIBLE. MAX. COMPONENT WEIGHT: 30GR. (STANDARD), 100GR |--| A1D00119834-01 |--| A1D0011983401
|
Siemens
|
|
A1D00116962-01
|
PROTECTION SHIELD FOR SIPLACE P LACEMENT STATIONS 6-10 FEEDER L OCATIONS. |--| A1D00116962-01 |--| A1D0011696201
|
Siemens
|
|
A1D00119861
|
THE RECONFIGURATIONKIT C&P IS N ECCESSARY TO EXCHANGE THE 12-SE GMENT COLLECT AND PLACE HEAD OF THE D1/D2 WITH A 6-SEGMENT COL LECT AND PLACE HEAD. THE KIT IN CLUDES: 6-SEGMENT COLLECT AND P LACE HEAD, COMPONENT CAMERA, SE T SLEEVES, COVER, TOOLS FOR HEA D EXCHANGE, BOX FOR REPLACED HE AD, NOZZLES (TYPE 904) AND A TE CHNICAL MANUAL FOR THE HEAD EXC HANGE. WITH THIS KIT THE HEAD E XCHANGE CAN BE PERFORMED BY TRA INED SERVICE PERSONAL AT CUSTOM ER SIDE WITHIN 8 HOURS. IF REQU IRED, THE AUTOMATIC NOZZLE CHAN GER FOR THE 6-SEGMENT COLLECT A ND PLACE HEAD HAS TO BE ORDERED SEPERATLY. |--| A1D00119861
|
Siemens
|
|
A1D00119850
|
SMD PLACEMENT STATION SIPLACE D 2 WITH TWO GANTRIES FOR HIGH-SP EED APPLICATIONS WITH A MAXIMUM PLACEMENT RATE OF 31,000 COMPO NENTS PER HOUR. FOR DETAILS SEE CURRENT VALID SCOPE OF SERVICE AND DELIVERY. THE PLACEMENT ST ATION PROVIDES A COMPONENT FEED ER CAPACITY OF MAXIMUM 90 X 8MM TAPES. EACH OF THE TWO GANTRIE S OF THE PLACEMENT STATION MUST BE CONFIGURED WITH A 12-SEGMEN T COLLECT AND PLACE HEAD OR A 6 -SEGMENT COLLECT AND PLACE HEAD , BOTH WITH INTEGRATED COMPONEN T VISION. IN ADDITION THE HEADS CAN BE EXCHANGED LATER IN THE FIELD. FOR THIS THE ORDER OF TH E RESPECTIVE HEAD RECONFIGURATI ON KIT IS NECESSARY. BY ORDER O |--| A1D00119850
|
Siemens
|
|
A1D00116963-01
|
PROTECTION SHIELD SIPLACE PLACE MENT STATIONS 11-20 FEEDER LOCA TIONS. |--| A1D00116963-01 |--| A1D0011696301
|
Siemens
|
|
A1D00119846
|
ADAPTER FOR FEEDER CHANGEOVER T ABLE (119822) SIPLACE D1/D2, FO R THE REEL HOLDER (141204),FOR THE TAPE FEEDER MODULE 3X8MM (1 41098/141099/141088).THE ADAPTE R CONNECT THE FEEDER CHANGOVER TABLE WITH THE REEL HOLDER. |--| A1D00119846
|
Siemens
|
|
A1D00117010
|
DIP MODULE FOR THE APPLICATION OF FLUX OR ELECTRICALLY CONDUCT IVE ADHESIVE ONTO FLIP CHIP BUM PS OR CSP BALLS. THE MODULE COV ERS 3 FEEDER SLOTS (30MM EACH). THE DIP-MODULE CAN ONLY BE USE D ON THE FOLLOWING PLACEMENT ST ATIONS: SIPLACE F5 HM EX STA TION COMPUTER SOFTWARE VERSION 407.02, SIPLACE S-27 HM EX STA TION COMPUTER SOFTWARE VERSION 505.01, SIPLACE HF/D-SERIE EX S TATION COMPUTER SOFTWARE VERSIO N 505.01. STANDARD 25UM-75UM, SPACER 10UM (00378544-01). |--| A1D00117010
|
Siemens
|
|
A1D00119854
|
THE FEEDER PROTECTION CONSISTS OF A COVER OVER THE FEED AREA. IF A FEEDER IS PRESSED UP OR IF FEEDER FLAPS ARE PROJECTING UP WARDS, THE EMERGENCY OFF IS ACT UATED. THE OPTION CONTAINS ONE PROTECTION PLATE FOR THE FEEDER AREA (LOCATION) 1 OF THE SIPLA CE D2. |--| A1D00119854
|
Siemens
|
|
A1D00117010S02
|
DIP MODULE FOR THE APPLICATION OF FLUX OR ELECTRICALLY CONDUCT IVEADHESIVE ONTO FLIP CHIP BUMP S OR CSP BALLS. THE MODULE COVE RS 3 FEEDERSLOTS (30MM EACH). T HE DIP-MODULE CAN ONLY BE USED ON THE FOLLOWING PLACEMENT STAT IONS: SIPLACE F5 HM EX STATI ON COMPUTER SOFTWARE VERSION 40 7.02, SIPLACE S-27 HM EX STATI ON COMPUTER SOFTWARE VERSION 50 5.01, SIPLACE HF-SERIE EX STATI ON COMPUTER SOFTWARE VERSION 50 5.01 . |--| A1D00117010S02
|
Siemens
|
|
A1D00119856
|
THE FEEDER PROTECTION CONSISTS OF A COVER OVER THE FEED AREA. IF A FEEDER IS PRESSED UP OR IF FEEDER FLAPS ARE PROJECTING UP WARDS, THE EMERGENCY OFF IS ACT UATED. THE OPTION CONTAINS ONE PROTECTION PLATE FOR THE FEEDER AREA (LOCATION) 2 OF THE SIPLA CE D2. |--| A1D00119856
|
Siemens
|
|
A1D00117011
|
LINEAR DIP MODULE FOR THE APPLI CATION OF FLUX MATERIALS ON FLI P CHIP BUMPS OR CSP BALLS. THE MODULE COVERS 9 FEEDER SLOTS (1 1.8MM EACH). THE MODULE CAN ONL Y BE USED ON X-MACHINES WITH SW VERSION 604/SIPRO 5.0 OR HIGHE R. THE DIPPING PLATE FOR DEFINI NG THE CUSTOMER SPECIFIC FLUX M ATERIAL THICKNESS HAS TO BE CON FIGURED SEPERATELY. |--| A1D00117011
|
Siemens
|
|
A1D00119857
|
ADDITIONAL MECHANICAL PCB ALIGN MENT FOR D1/D2 SINGLE CONVEYOR: WITH THIS OPTION PCBS WITH A L ENGTH/WIDTH RATIO BIGGER 2/1 C AN BE TRANSPORTED WITH THE SMAL L SIDE AT THE SINGLE CONVEYOR B ELTS INTO THE PLACEMENT AREA. T HIS OPTION IS ONLY AVAILABLE FO R SINGLE CONVEYOR. |--| A1D00119857
|
Siemens
|
|
A1D00119860
|
THE RECONFIGURATIONKIT C&P IS N ECCESSARY TO EXCHANGE THE 6-SEG MENT COLLECT AND PLACE HEAD OF THE D1/D2 WITH A 12-SEGMENT COL LECT AND PLACE HEAD. THE KIT IN CLUDES: 12-SEGMENT COLLECT AND PLACE HEAD, COMPONENT CAMERA, S ET SLEEVES, COVER, TOOLS FOR HE AD EXCHANGE, BOX FOR REPLACED H EAD, NOZZLES (TYPE 904) AND A T ECHNICAL MANUAL FOR THE HEAD EX CHANGE. WITH THIS KIT THE HEAD EXCHANGE CAN BE PERFORMED BY TR AINED SERVICE PERSONAL AT CUSTO MER SIDE WITHIN 8 HOURS. IF REQ UIRED, THE AUTOMATIC NOZZLE CHA NGER FOR THE 12-SEGMENT COLLECT AND PLACE HEAD HAS TO BE ORDER ED SEPERATLY. |--| A1D00119860
|
Siemens
|
|
A1D00117026
|
DIPPING PLATE FOR DEFINING THE CUSTOMER SPECIFIC FLUX MATERIAL THICKNESS. IMPORTANT: THE CAVI TY DEPTH IS NOT IDENTICAL WITH THE LAYER HEIGHT WHICH WILL BE ACHIEVED. THE RESULTING LAYER H EIGHT VERY MUCH DEPENDS ON THE DIP MEDIUM MATERIAL PROPERTIES LIKE VISCOSITY ETC.. THUS THE R IGHT CAVITY PLATE DEPTH HAS TO BE DEFINED IN COOPERATION WITH THE REGIONAL DEMOCENTER. |--| A1D00117026
|
Siemens
|
|
A1D00119862
|
THE ADAPTER KIT SIPLACE D1 P&P HEAD IS NECESSARY TO UPGRADE A SIPLACE D1 MACHINE WITH ONLY A COLLECT & PLACE HEAD TO A SIPLA CE D1 WITH AN ADDITIONAL P&P HE AD. AFTER THE UPGRADE A WIDER C OMPONENT RANGE COULD BE ACHIEVE D, IN DETAIL FOR LARGER AND HIG HER COMPONENTS. FOR MORE DETAIL S REGARDING WIDER COMPONENT RAN GE AND OTHER TECHNICAL POINTS, PLEASE SEE THE ACTUAL SPECIFICA TION OF THE SIPLACE D1. THIS AD APTER KIT INCLUDES THE PICK AND PLACE MODULE, NOZZLE CHANGER P &P WHICH INCLUDES 2 DUAL MAGAZI NES FOR STANDARD NOZZLES AND 1 MAGAZINE FOR SPECIAL NOZZLES, S TATIONARY COMPONENT CAMERA (TYP E 36), SERVO CARDS, ELECTRICAL |--| A1D00119862
|
Siemens
|
|
A1D00117027
|
DIPPING PLATE FOR DEFINING THE CUSTOMER SPECIFIC FLUX MATERIAL THICKNESS. IMPORTANT: THE CAVI TY DEPTH IS NOT IDENTICAL WITH THE LAYER HEIGHT WHICH WILL BE ACHIEVED. THE RESULTING LAYER H EIGHT VERY MUCH DEPENDS ON THE DIP MEDIUM MATERIAL PROPERTIES LIKE VISCOSITY ETC.. THUS THE R IGHT CAVITY PLATE DEPTH HAS TO BE DEFINED IN COOPERATION WITH THE REGIONAL DEMOCENTER. |--| A1D00117027
|
Siemens
|
|
A1D00117029
|
DIPPING PLATE FOR DEFINING THE CUSTOMER SPECIFIC FLUX MATERIAL THICKNESS. IMPORTANT: THE CAVI TY DEPTH IS NOT IDENTICAL WITH THE LAYER HEIGHT WHICH WILL BE ACHIEVED. THE RESULTING LAYER H EIGHT VERY MUCH DEPENDS ON THE DIP MEDIUM MATERIAL PROPERTIES LIKE VISCOSITY ETC.. THUS THE R IGHT CAVITY PLATE DEPTH HAS TO BE DEFINED IN COOPERATION WITH THE REGIONAL DEMOCENTER. |--| A1D00117029
|
Siemens
|
|
A1D00119863
|
THE ADAPTER KIT SIPLACE D1 C&P 6 HEAD IS NECESSARY TO UPGRADE A SIPLACE D1 MACHINE WITH ONLY A PICK & PLACE HEAD TO A SIPLAC E D1 WITH AN ADDITIONAL 6 SEGME NT COLLECT & PLACE HEAD. AFTER THE UPGRADE A WIDER COMPONENT R ANGE COULD BE ARCHIVED AND DUE TO THE COLLECT & PLACE PRINCIPL E ALSO A HIGHER PLACEMENT RATE WITH SMALLER COMPONENTS. FOR MO RE DETAILS REGARDING HIGHER PER FORMANCE AND WIDER COMPONENT RA NGE, PLEASE SEE THE SPECIFICATI ON OF THE SIPLACE D1. THIS ADAP TER KIT INCLUDES THE 6 SEGMENT COLLECT & PLACE HEAD, 12 SLEEVE S, COMPONENT CAMERA (TYPE 29), SERVO CARDS, ELECTRICAL AND PNE UMATIC CONNECTIONS, SMALL PARTS |--| A1D00119863
|
Siemens
|
|
A1D00117032
|
DIPPING PLATE FOR DEFINING THE CUSTOMER SPECIFIC FLUX MATERIAL THICKNESS. IMPORTANT: THE CAVI TY DEPTH IS NOT IDENTICAL WITH THE LAYER HEIGHT WHICH WILL BE ACHIEVED. THE RESULTING LAYER H EIGHT VERY MUCH DEPENDS ON THE DIP MEDIUM MATERIAL PROPERTIES LIKE VISCOSITY ETC.. THUS THE R IGHT CAVITY PLATE DEPTH HAS TO BE DEFINED IN COOPERATION WITH THE REGIONAL DEMOCENTER. |--| A1D00117032
|
Siemens
|
|
A1D00119865
|
NOZZLE CHANGER FOR 12-SEGMENT C OLLECT AND PLACE HEAD SIPLACE D 1/D2. FOR EACH COLLECT AND PLAC E HEAD ONE NOZZLE CHANGER HAS T O BE ORDERED. THE OPTION CONTAI NS 6 MAGAZINES FOR 12 NOZZLES I NCLUDE NOZZLE REJECT DEVICE. |--| A1D00119865
|
Siemens
|
|
A1D00117030
|
DIPPING PLATE FOR DEFINING THE CUSTOMER SPECIFIC FLUX MATERIAL THICKNESS. IMPORTANT: THE CAVI TY DEPTH IS NOT IDENTICAL WITH THE LAYER HEIGHT WHICH WILL BE ACHIEVED. THE RESULTING LAYER H EIGHT VERY MUCH DEPENDS ON THE DIP MEDIUM MATERIAL PROPERTIES LIKE VISCOSITY ETC.. THUS THE R IGHT CAVITY PLATE DEPTH HAS TO BE DEFINED IN COOPERATION WITH THE REGIONAL DEMOCENTER. |--| A1D00117030
|
Siemens
|
