NJ2-N-H42 - Inductive sensor | NJ2-N-H42 - Quad Industry GmbH
Артикул: NJ2-N-H42
Наименование: Inductive sensor | NJ2-N-H42
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 2 mm flush
- Compression proof up to 350 bar, dynamic on active surface
Datasheet as PDF in following languages: Technical Data: NJ2-N-H42General specifications | Switching element function | NAMUR, NC | Rated operating distance | 1.5 mm | Installation | flush | Output polarity | DC | Assured operating distance | 0 ... 1.22 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.3 | Reduction factor r304 | 0.85 | Nominal ratings | Nominal voltage | 8 V | Switching frequency | 0 ... 400 Hz | Hysteresis | typ. 5 % | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | Compliance with standards and directives | Standard conformity | | | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | Mechanical specifications | Connection type | connector, ZH 630 603 00 Socket, ZH 632 603 00 | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | Ceramic | Housing diameter | 18 mm | Protection degree | IP50 |
|
Назад в раздел
|