NJ1,5-F2-E2-V3 - Inductive sensor | NJ1,5-F2-E2-V3 - Quad Industry GmbH
Артикул: NJ1,5-F2-E2-V3
Наименование: Inductive sensor | NJ1,5-F2-E2-V3
Производитель: Pepperl-Fuchs
|
|
Datasheet as PDF in following languages: Technical Data: NJ1,5-F2-E2-V3General specifications | Switching element function | PNP NO | Rated operating distance | 1.5 mm | Installation | flush | Output polarity | DC | Assured operating distance | 0 ... 1.215 mm | Nominal ratings | Operating voltage | 10 ... 30 V | Switching frequency | 1000 Hz | Hysteresis | typ. 5% | Reverse polarity protection | reverse polarity protected | Short-circuit protection | pulsing | Voltage drop | ≤ 3 V | Operating current | 0 ... 200 mA | No-load supply current | ≤ 15 mA | Switching state indication | LED, red | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | Ambient conditions | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | Mechanical specifications | Connection type | Connector M8 x 1 , 3-pin | Housing material | Polyamide (PA) | Protection degree | IP67 | Mass | 20 g | Note | Use a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH. The maximum actuation speed of the control slide is 0.1 m/s |
|
Назад в раздел
|