NJ25-50-N - Inductive sensor | NJ25-50-N - Quad Industry GmbH
Артикул: NJ25-50-N
Наименование: Inductive sensor | NJ25-50-N
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 25 mm non-flush
Datasheet as PDF in following languages: Technical Data: NJ25-50-NGeneral specifications | Switching element function | NAMUR, NC | Rated operating distance | 25 mm | Installation | non-flush | Output polarity | NAMUR | Assured operating distance | 0 ... 20.25 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.3 | Reduction factor r304 | 0.85 | Nominal ratings | Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | Switching frequency | 0 ... 250 Hz | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | Compliance with standards and directives | Standard conformity | | | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Approvals and certificates | FM approval | | | Control drawing | 116-0165F | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | Mechanical specifications | Connection type | cable PVC , 2 m | Core cross-section | 0.75 mm2 | Housing material | PBT | Sensing face | PBT | Housing diameter | 50 mm | Protection degree | IP67 | General information | Use in the hazardous area | see instruction manuals | | Category | 2G |
|
Назад в раздел
|