MN7220A2205 - (0)2-10 Vdc, (0)4-20 mA actuator with 175 lb-in and non-spring return - Quad Industry GmbH

Product Specifications

Application

HVAC

Dimensions (in.)

8.78 in high x 3.62 in wide x 3.15 in deep

Dimensions (mm)

223 mm high x 92 mm wide x 80 mm deep

Includes

Mounting bracket, self-centering shaft adapter

Weight (lb)

2.98 lb

Weight (kg)

1.35 kg

Materials

Plenum rated plastic housing

Comments

Integral 1/2 in. NPSM conduit connection.

Mounting

Direct Coupled

Frequency

50 Hz, 60 Hz

Approvals, Underwriters Laboratories Inc.

UL873, Plenum Rated

Tradeline Value

Tradeline

Electrical Connections

Enclosed screw terminal strip (22 to 14 AWG)

Operating Humidity Range (% RH)

5 to 95% RH, non-condensing

Supply Voltage

24 Vac ?20%

Power Consumption

Driving-- 6 VA, 6 W

Shipping and Storage Temperature Range (F)

-40 F to +175 F

Shipping and Storage Temperature Range (C)

-40 C to +80 C

Approvals, CE

89/336/ECC, 73/23/EEC

Approvals, Canadian Underwriters Laboratories Inc.

cUL C22.2 No. 24-93

Ambient Temperature Range (F)

-5 F to +140 F

Ambient Temperature Range (C)

-20 C to +60 C

Switch Ratings

250 Vac, 5 A res (3 A ind)

Approvals, C-Tick

N314

Environmental, Electrical or Ingress Protection Rating

NEMA 2, IP54

Internal Auxiliary Switch

2

Maximum Noise Rating

Driving (dB(A) @ 1m)-- 40

Stroke

95 ?3 degrees

Shaft Dimensions (in.)

3/8 to 1.06 in. round or 3/8 to 11/16 in. square

Actuator Type

Damper, Valve

Control Signal

(0)2-10 Vdc (4-20 mA w/500 ohm resistor)

Fail Safe Mode

Non-Spring Return

Torque Rating (lb-in.)

175 lb-in.

Torque Rating (Nm)

20 Nm

Additional Torque Ratings (lb-in.)

Maximum Stall-- 257 lb-in.

Additional Torque Ratings (Nm)

Maximum Stall-- 29 Nm

External Auxiliary Switches Available

Yes, SW2-US

Rotation to Open

By switch

Rotational Stroke Adjustment

Dual Integral Adj. Stops (3 degree increments)

Timing, Nominal

Driving @ 60 Hz-- 95 sec

Feedback

(0)2-10 Vdc (max. output: ?1.0 mA)

Shaft Adapter Type

Self-centering clamping

Manual operation

Declutch mechanism

Shaft Dimensions (mm)

10 to 27 mm round or 10 to 18 mm square

Input Impedance

100K ohm (voltage), 500 ohm (current)