NMB8-SAE16GM27-E2-FE-V1 - Inductive sensor | NMB8-SAE16GM27-E2-FE-V1 - Quad Industry GmbH
Артикул: NMB8-SAE16GM27-E2-FE-V1
Наименование: Inductive sensor | NMB8-SAE16GM27-E2-FE-V1
Производитель: Pepperl-Fuchs
|
|
- Stainless steel sensing face
- Sensing range 8 mm
- 5000 psi dynamic pressure rating
- 3-wire DC
Datasheet as PDF in following languages: Technical Data: NMB8-SAE16GM27-E2-FE-V1General specifications | Switching element function | PNP NO | Rated operating distance | 8 mm | Installation | flush | Output polarity | DC | Assured operating distance | 0 ... 6.48 mm | Reduction factor rAl | 0 | Reduction factor rCu | 0 | Reduction factor r304 | 0.6 - 0.8 | Reduction factor rSt37 | 1 | Reduction factor rBrass | 0 | Nominal ratings | Operating voltage | 10 ... 30 V DC | Switching frequency | 10 Hz max | Hysteresis | 5 ... 15 10 | Reverse polarity protection | yes | Short-circuit protection | yes | Voltage drop | ≤ 2 V | Operating current | ≤ 200 mA | Off-state current | ≤ 10 µA | No-load supply current | ≤ 10 mA | Limit data | Operating pressure statically | 10,000 psi | Operating pressure dynamically | 5000 psi | Functional safety related parameters | MTTFd | 990 a | Mission Time (TM) | 20 a | Diagnostic Coverage (DC) | 0 % | Indicators/operating means | Operating display | 4-way dual LED Green: power Yellow: output | Standard conformity | Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | Approvals and certificates | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) | Mechanical specifications | Housing material | Stainless steel 1.4305 / AISI 303 | Sensing face | Stainless steel 1.4305 / AISI 303 | Housing diameter | SAE16 | Protection degree | IP67 / IP68 / IP69K - cordset dependent according to cable specification | Note | O-ring: Dash 916, viton (1.171 in x 1.403 in (29.74 x 35.64 mm)) |
|
Назад в раздел
|