NJ40+U4+A2-V1 - Inductive sensor | NJ40+U4+A2-V1 - Quad Industry GmbH
Артикул: NJ40+U4+A2-V1
Наименование: Inductive sensor | NJ40+U4+A2-V1
Производитель: Pepperl-Fuchs
|
|
- 4-wire DC
- 40 mm non-flush
- M12 male connector
Datasheet as PDF in following languages: Technical Data: NJ40+U4+A2-V1| General specifications | | Switching element function | PNP NO/NC | | Rated operating distance | 40 mm | | Installation | non-flush | | Output polarity | DC | | Assured operating distance | 0 ... 32.4 mm | | Reduction factor rAl | 0.5 | | Reduction factor rCu | 0.45 | | Reduction factor r304 | 0.8 | | Nominal ratings | | Operating voltage | 10 ... 60 V DC | | Switching frequency | 0 ... 100 Hz | | Hysteresis | 1 ... 10 typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 2.8 V | | Operating current | 0 ... 200 mA | | No-load supply current | ≤ 10 mA | | Operating voltage display | LED, green | | Switching state indication | LED, yellow | | Standard conformity | | Standards | EN 60947-5-2:2007
IEC 60947-5-2:2007 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | Certified by China Compulsory Certification (CCC) | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP68 |
|
Назад в раздел
|
