NJ30P+U1+A2 - Inductive sensor | NJ30P+U1+A2 - Quad Industry GmbH
Артикул: NJ30P+U1+A2
Наименование: Inductive sensor | NJ30P+U1+A2
Производитель: Pepperl-Fuchs
|
|
- 30 mm non-flush
- Only for non-ferrous metals
Datasheet as PDF in following languages: Technical Data: NJ30P+U1+A2General specifications | Switching element function | PNP NO/NC | Rated operating distance | 30 mm | Installation | non-flush | Output polarity | Selective | Assured operating distance | 1 ... 24.3 mm | Reduction factor rAl | 1 | Reduction factor rCu | 1 | Reduction factor rSt37 | 0 | Reduction factor rBrass | 1 | Nominal ratings | Operating voltage | 10 ... 30 V | Switching frequency | 0 ... 150 Hz | Hysteresis | typ. 5 % | Reverse polarity protection | reverse polarity protected | Short-circuit protection | pulsing | Voltage drop | ≤ 3 V | Operating current | 0 ... 200 mA | No-load supply current | ≤ 20 mA | Operating voltage display | LED, green | Switching state indication | LED, yellow | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | Ambient conditions | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | Mechanical specifications | Connection type | screw terminals | Core cross-section | up to 2.5 mm2 | Housing material | PBT | Sensing face | PBT | Protection degree | IP68 |
|
Назад в раздел
|