NJ15+U1+2E2-NE/FE - Inductive sensor | NJ15+U1+2E2-NE/FE - Quad Industry GmbH
Артикул: NJ15+U1+2E2-NE/FE
Наименование: Inductive sensor | NJ15+U1+2E2-NE/FE
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 15 mm non-flush
Fe = output 4/BK
Ne = output 2/WH
Datasheet as PDF in following languages: Technical Data: NJ15+U1+2E2-NE/FE| General specifications | | Switching element function | PNP NO | | Rated operating distance | 15 mm | | Installation | non-flush | | Output polarity | Selective | | Assured operating distance | 0 ... 12.15 mm | | Reduction factor rAl | 1/0 | | Reduction factor rCu | 1/0 | | Reduction factor rSt37 | 0/1 | | Reduction factor rBrass | 1/0 | | Nominal ratings | | Operating voltage | 10 ... 30 V | | Switching frequency | 0 ... 100 Hz | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 200 mA | | No-load supply current | ≤ 20 mA | | Switching state indication | LED, yellow=Fe; red=Al | | Functional safety related parameters | | MTTFd | 1110 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | 0 ... 50 В°C (32 ... 122 В°F) | | Mechanical specifications | | Connection type | screw terminals | | Core cross-section | up to 2.5 mm2 | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP68 |
|
Назад в раздел
|
