RL28-55-Z/82b/110/112 - Retroreflective sensor | RL28-55-Z/82b/110/112 - Quad Industry GmbH
Артикул: RL28-55-Z/82b/110/112
Наименование: Retroreflective sensor | RL28-55-Z/82b/110/112
Производитель: Pepperl-Fuchs
|
|
- Ultra bright LEDs for power on, pre fault indication and switching state
- Programmable time function GAN, GAB, IAB and GAN-IAB as double function
- Not sensitive to ambient light, even with switched energy saving lamps
- Waterproof, protection degree IP67
- Protection class II
Datasheet as PDF in following languages: Technical Data: RL28-55-Z/82b/110/112| Product Description | | Retroreflective sensor with polarization filter | | General specifications | | Effective detection range | 0 ... 17 m | | Threshold detection range | 21 m
| | Light source | LED | | Light type | modulated visible red light , 660 nm | | Diameter of the light spot | approx. 290 mm at a distance of 17 m | | Angle of divergence | emitter 1.2В°
receiver 2В° | | Functional safety related parameters | | MTTFd | 1140 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Indicators/operating means | | Function display | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted | | Controls | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light/Dark switch | | Electrical specifications | | Operating voltage | 10 ... 30 V DC | | Output | | Switching type | light/dark on, switchable . (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) | | Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected | | Compliance with standards and directives | | Standard conformity | | | Product standard | EN 60947-5-2:2007 | | Mechanical specifications | | Protection degree | IP67 | | Connection | 5-pin, M12 x 1 connector, 90В° rotatable |
|
Назад в раздел
|
