MN6105A1201/U - Two Position, Float Actuator - 44 lb-in - Quad Industry GmbH

Product Specifications

Application

HVAC

Dimensions (in.)

5.23 in high x 2.60 in wide x 2.44 in deep

Dimensions (mm)

134 mm high x 66 mm wide x 62 mm deep.

Includes

Mounting bracket, screws, shaft adapter, water-tight strain-relief cable fittings

Weight (lb)

1 lb

Weight (kg)

0.45 kg

Materials

Plenum rated plastic housing

Comments

Integral 1/2 in. NPSM conduit connection.

Mounting

Direct Coupled

Frequency

50 Hz, 60 Hz

Approvals, Underwriters Laboratories Inc.

UL873, Plenum Rated

Tradeline Value

Tradeline

Electrical Connections

Enclosed screw terminal strip (22 to 14 AWG)

Operating Humidity Range (% RH)

5 to 95% RH, non-condensing

Supply Voltage

24 Vac +20%, -15%, 24 Vdc

Power Consumption

Driving-- 5 VA

Shipping and Storage Temperature Range (F)

-22 F to +176 F

Shipping and Storage Temperature Range (C)

-30 C to +80 C

Approvals, CE

89/336/ECC, 73/23/EEC

Approvals, Canadian Underwriters Laboratories Inc.

cUL C22.2 No. 24-93

Ambient Temperature Range (F)

-5 F to +140 F

Ambient Temperature Range (C)

-20 C to +60 C

Switch Ratings

30 Vdc max., 3 A Class II

Approvals, C-Tick

N314

Environmental, Electrical or Ingress Protection Rating

NEMA 2, IP54

Internal Auxiliary Switch

2

Maximum Noise Rating

Driving (dB(A) @ 1m)-- 35

Stroke

95 ?3 degrees

Shaft Dimensions (in.)

1/4 to 1/2 in. square or 3/8 to 5/8 in. round

Actuator Type

Damper, Valve

Control Signal

Floating, SPDT, On/Off

Fail Safe Mode

Non-Spring Return

Torque Rating (lb-in.)

44 lb-in.

Torque Rating (Nm)

5 Nm

Additional Torque Ratings (lb-in.)

Maximum Stall-- 70 lb-in.

Additional Torque Ratings (Nm)

Maximum Stall-- 8 Nm

External Auxiliary Switches Available

Yes, SSW2-1M

Rotation to Open

By switch

Rotational Stroke Adjustment

Dual Integral Adj. Stops (3 degree increments)

Timing, Nominal

Driving @ 60 Hz-- 95 sec

Shaft Adapter Type

U-bolt clamp

Manual operation

Declutch mechanism

Shaft Dimensions (mm)

6 to 13 mm square or 8 to 16 mm round