NBN30-U4K-N0 - Inductive sensor | NBN30-U4K-N0 - Quad Industry GmbH
Артикул: NBN30-U4K-N0
Наименование: Inductive sensor | NBN30-U4K-N0
Производитель: Pepperl-Fuchs
|
|
Datasheet as PDF in following languages: Technical Data: NBN30-U4K-N0| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 30 mm | | Installation | non-flush | | Output polarity | DC | | Assured operating distance | 0 ... 24.3 mm | | Reduction factor rAl | 0.31 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.74 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 150 Hz | | Hysteresis | typ. 5 % | | Reverse polarity protection | yes | | Short-circuit protection | yes | | Current consumption | | | Measuring plate not detected | min. 2.2 mA | | Measuring plate detected | ≤ 1 mA | | Switching state indication | LED, yellow | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Electromagnetic compatibility | NE 21:2007 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) | | Mechanical specifications | | Connection type | 1/2 NPT terminal compartment, wire cross-section ≤ 2.5 mm2 | | Housing material | PA/metal | | Sensing face | PA | | Housing diameter | | | Protection degree | IP68 / IP69K | | Mass | 225 g | | Note | Tightening torque: 1.8 Nm (housing)
Tightening torque: 1.0 Nm (Screw terminal) | | General information | | Use in the hazardous area | see instruction manuals | | Category | 1G; 2G; 3G |
|
Назад в раздел
|
