NRB8-18GM50-E2-C-V1-EXG - Inductive sensor | NRB8-18GM50-E2-C-V1-EXG - Quad Industry GmbH
Артикул: NRB8-18GM50-E2-C-V1-EXG
Наименование: Inductive sensor | NRB8-18GM50-E2-C-V1-EXG
Производитель: Pepperl-Fuchs
|
|
- 8 mm flush
- Reduction factor = 1
- Weld Immune
- Magnetic field resistant
Datasheet as PDF in following languages: Technical Data: NRB8-18GM50-E2-C-V1-EXGGeneral specifications | Switching element function | PNP NO | Installation | flush | Output polarity | switched high | Assured operating distance | 0 ... 6.48 mm Only for use in mounting aid EXG-18 | Reduction factor rAl | 1 | Reduction factor rCu | 1 | Reduction factor r304 | 1 | Reduction factor rSt37 | 1 | Nominal ratings | Operating voltage | 10 ... 30 V | Switching frequency | 0 ... 600 Hz | Hysteresis | typ. 5 % | Reverse polarity protection | reverse polarity protected | Short-circuit protection | pulsing | Voltage drop | ≤ 3 V | Operating current | 0 ... 200 mA | Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 В°C | No-load supply current | ≤ 15 mA | Constant magnetic field | 200 mT | Alternating magnetic field | 200 mT | Switching state indication | Multihole-LED, yellow | Functional safety related parameters | MTTFd | 1360 a | Mission Time (TM) | 20 a | Diagnostic Coverage (DC) | 0 % | Approvals and certificates | Protection class | II | | Rated insulation voltage | 60 V | | Design-impulse-voltage withstand | 800 V | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) | Mechanical specifications | Connection type | Connector M12 x 1 , 4-pin | Housing material | Brass, PTFE coated | Sensing face | Ryton R4 | Housing diameter | 18 mm | Protection degree | IP67 | Note | Only for use in mounting aid EXG-18 |
|
Назад в раздел
|