NMB10-18GM50-E2-F - Inductive sensor | NMB10-18GM50-E2-F - Quad Industry GmbH
Артикул: NMB10-18GM50-E2-F
Наименование: Inductive sensor | NMB10-18GM50-E2-F
Производитель: Pepperl-Fuchs
|
|
- 10 mm flush
- Active surface metal
- One-piece housing with stainless steel (V4A; 1.4435)
Datasheet as PDF in following languages: Technical Data: NMB10-18GM50-E2-FGeneral specifications | Switching element function | PNP NO | Rated operating distance | 10 mm | Installation | flush in mild steel | Output polarity | DC | Assured operating distance | 0 ... 8.1 mm | Reduction factor rAl | 0.4 | Reduction factor rCu | 0.25 | Reduction factor r304 | 0.5 (0.9 of material thickness 2 mm) | Reduction factor rSt37 | 1 | Nominal ratings | Operating voltage | 10 ... 30 V | Switching frequency | 0 ... 300 Hz | Hysteresis | 3 ... 15 typ. 5 % | Reverse polarity protection | yes | Short-circuit protection | yes | Voltage drop | ≤ 2 V | Operating current | 0 ... 200 mA | Off-state current | ≤ 0.1 mA | No-load supply current | ≤ 10 mA | Switching state indication | LED, yellow | Limit data | Operating pressure statically | 60 bar (870.2 psi) max. | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | CCC approval | CCC approval / marking not required for products rated ≤36 V | Ambient conditions | Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) | Mechanical specifications | Connection type | cable TPE-S , 2 m 3 x 0.34 mm2 | Housing material | Stainless steel 1.4435 / AISI 316L | Sensing face | Stainless steel 1.4435 / AISI 316L | Housing diameter | 18 mm | Protection degree | IP68 / IP69K | Mass | 112 g |
|
Назад в раздел
|