NJ10-30GM50-A2-V1 - Inductive sensor | NJ10-30GM50-A2-V1 - Quad Industry GmbH
Артикул: NJ10-30GM50-A2-V1
Наименование: Inductive sensor | NJ10-30GM50-A2-V1
Производитель: Pepperl-Fuchs
|
|
- Stainless steel housing
- 10 mm flush
Datasheet as PDF in following languages: Technical Data: NJ10-30GM50-A2-V1| General specifications | | Switching element function | PNP NO/NC | | Rated operating distance | 10 mm | | Installation | flush | | Output polarity | DC | | Assured operating distance | 0 ... 8.1 mm | | Reduction factor rAl | 0.2 | | Reduction factor rCu | 0.15 | | Reduction factor r304 | 0.6 | | Nominal ratings | | Operating voltage | 10 ... 60 V | | Switching frequency | 0 ... 300 Hz | | Hysteresis | typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 400 mA | | No-load supply current | ≤ 15 mA | | Switching state indication | Multihole-LED, rear | | Functional safety related parameters | | MTTFd | 1190 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | PBT | | Housing diameter | 30 mm | | Protection degree | IP67 |
|
Назад в раздел
|
