MS8120W1205/U - Honeywell two position or SPST, 175 lb-in., 20 Nm direct-coupled actuator - Quad Industry GmbH
Артикул: MS8120W1205/U
Наименование: Honeywell two position or SPST, 175 lb-in., 20 Nm direct-coupled actuator
Производитель: Honeywell
|
|
Product Specifications - Application
- HVAC
- Dimensions (in.)
- 9.72 in high x 3.94 in wide x 2.95 in deep
- Dimensions (mm)
- 247 mm high x 100 mm wide x 75 mm deep
- Includes
- Mounting bracket, self-centering shaft adapter, 3mm crank
- Weight (lb)
- 6 lb
- Weight (kg)
- 2.72 kg
- Materials
- Aluminum housing, Plenum rated plastic access cover
- Comments
- Integral 1/2 in. NPSM conduit connection.
- Mounting
- Direct Coupled
- Frequency
- 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc.
- UL873, Plenum Rated
- Electrical Connections
- 18 AWG color-coded cable
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 24 Vac ?20%
- Power Consumption
- Driving-- 40 VA, Holding-- 8 VA
- Shipping and Storage Temperature Range (F)
- -40 F to +158 F
- Shipping and Storage Temperature Range (C)
- -40 C to +70 C
- Approvals, CE
- 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc.
- cUL C22.2 No. 24-93
- Ambient Temperature Range (F)
- -40 F to +140 F
- Ambient Temperature Range (C)
- -40 C to +60 C
- Switch Ratings
- 250 Vac, 5 A res (3 A ind)
- Approvals, C-Tick
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 2
- Internal Auxiliary Switch
- 2
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke
- 95 ?3 degrees
- Shaft Dimensions (in.)
- 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Actuator Type
- Damper
- Control Signal
- Two position, SPST
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 175 lb-in.
- Torque Rating (Nm)
- 20 Nm
- Spring Return Torque/Force (lb-in., lbf)
- 175 lb-in.
- Spring Return Torque/Force (Nm, N)
- 20 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 300 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 34 Nm
- External Auxiliary Switches Available
- Yes, SW2-US
- Rotational Stroke Adjustment
- Mechanically limited 5 degree increments
- Cable
- Threaded conduit connector
- Timing, Nominal
- Driving @ 60 Hz-- 45 sec
- Spring Return Timing
- Maximum-- 20 sec
- Shaft Adapter Type
- Self-centering clamping
- Manual operation
- Manual crank
- Shaft Dimensions (mm)
- 10 to 27 mm round or 10 to 18 mm square
- Spring Return Direction
- By orientation
- Electrical Connections (in.)
- 36 in.
- Electrical Connections (mm)
- 0.9 m
Marketing Collateral Product Selections/Comparisons-Competitive Direct Coupled Actuator (DCA) Cross-Reference Wiring-Terminal block Details for Spring Return Direct Coupled Actuators Wiring-MS7110 Wiring Diagram Wiring-MS7110 actuator wiring Wiring-Wiring for 0/2-10 Vdc proportioning controller operating multiple actuators Wiring-SPDT end switch operation Wiring-S05010 S10010 S20010 Actuator wiring Wiring-Wiring for high side (triac source) floating control Wiring-Wiring for low side (triac sink) floating control Wiring-Wiring for low side (triac sink) floating control using separate transformers Wiring-Wiring for 4-20 mA proportioning controller operating multiple actuators Wiring-Wiring 0/2-10 Vdc proportioning controller operating multiple actuators Wiring-Wiring for SPST on/off control Wiring-Wiring switch only actuator models Dimension-Spring Return Direct Coupled Actuators, 44 lb-in, 88 lb-in and 175 lb-in Technical Documents Installation Materials-Foot-Mounted Bracket for Direct Coupled Actuators (DCA) Installation Materials-Crankarm Kit for Direct Coupled Actuators (DCA) Installation Materials-Tandem Mounting Kit for Direct Coupled Actuators (DCA) Installation Materials-Spring Return Direct Coupled Actuators (DCA), 88 lb-in (10 Nm) and 175 lb-in (20 Nm) 10Nm, 20 Nm Series Spring Return Sylk Comm Product Data and Specifications-Spring Return Direct Coupled Actuators (DCA), 88 lb-in (10 Nm) and 175 lb-in (20 Nm) Product Data and Specifications-Spring Return Direct Coupled Actuators (DCA), 175 lb-in (20 Nm) Installation Materials-Tandem Mount for Direct Coupled Actuators (DCA) Accessory Kit Installation Materials-Auxiliary Switch Kit for Non-Spring and Spring Return Direct Coupled Actuators (DCA), MNXX20, MNXX34, MSXX10A, MSXX20A Product Data and Specifications-Accessories for Direct Coupled Actuators (DCA) | | | | |
|
Назад в раздел
|
