| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
A1D00119928
|
FOR SIPLACE X4I/X4/X3/X2. CONFI GURATION OF THE CONVEYOR RAILS TO A DISTANCE OF 267.5MM FROM T HE CENTRE, THE DISTANCE BETWEEN THE TWO FIXED RAILS IS 535MM. BOTH FIXED RAILS ARE IN THE OU TER POSITION, WHICH MEANS ONE R AIL IS FIXED LEFT SIDE THE OTHE R RAIL FIXED RIGHT SIDE. THE TW O MOVING LANES ARE IN THE MIDDL E. IT MUST BE ENSURED, THAT THI S EXTENDED DIMENSION WILL BE SU PPORTED FROM ALL MACHINES IN TH E LINE OR RESPECTIVE SHUTTLES A RE AVAILABLE. THE MAXIMUM PCB W IDTH IS 250MM IN DUAL LANE MODE . |--| A1D00119928
|
Siemens
|
|
A1D00117261
|
THE HEAD RE-CONFIGURATION KIT I S NECESSARY TO EXCHANGE THE COL LECT AND PLACE HEAD OF SIPLACE PLACEMENT STATION WITH HEAD MOD ULARITY, SIPLACE F5 HM (117500) , IN A 6-SEGMENT COLLECT AND PL ACE HEAD. THE KIT INCLUDES: 6-S EGMENT COLLECT AND PLACE HEAD, SET NOZZLES, SET SLEEVES, COVER , TOOLS FOR HEAD EXCHANGE, BOX FOR REPLACED HEAD, TECHNICAL MA NUEL. WITH THIS KIT THE HEAD EX CHANGE CAN BE PERFORMED BY TRAI NED SERVICE PERSONNEL AT CUSTOM ER SITE WITHIN 8 HOURS. IF REQU IRED THE AUTOMATIC NOZZLE CHANG ER FOR THE 6-SEGMENT COLLECT AN D PLACE HEAD HAS TO BE ORDERED SEPARATELY. |--| A1D00117261
|
Siemens
|
|
A1D00119926
|
FOR SIPLACE X4I/X4/X3/X2.CONFIG URATION OF THE CONVEYOR RAILS T O A DISTANCE OF 254MM FROM THE CENTRE, THE DISTANCE BETWEEN TH E TWO FIXED RAILS IS 508MM. BOT H FIXED RAILS ARE IN THE OUTER POSITION, WHICH MEANS ONE RAIL IS FIXED LEFT SIDE THE OTHER RA IL FIXED RIGHT SIDE. THE TWO MO VING LANES ARE IN THE MIDDLE. I T MUST BE ENSURED, THAT THIS EX TENDED DIMENSION WILL BE SUPPOR TED FROM ALL MACHINES IN THE LI NE OR RESPECTIVE SHUTTLES ARE A VAILABLE. THE MAXIMUM PCB WIDTH IS 236.5MM IN DUAL LANE MODE. |--| A1D00119926
|
Siemens
|
|
A1D00117260
|
THE HEAD RE-CONFIGURATION KIT I S NECESSARY TO EXCHANGE THE COL LECT AND PLACE HEAD OF SIPLACE PLACEMENT STATIONS WITH HEAD MO DULARITY, SIPLACE F5 HM (117500 ), IN A 12-SEGMENT COLLECT AND PLACE HEAD. THE KIT INCLUDES: 1 2-SEGMENT COLLECT AND PLACE HEA D, SET NOZZLES, SET SLEEVES, CO VER, TOOLS FOR HEAD EXCHANGE, B OX FOR REPLACED HEAD, TECHNICAL MANUAL. WITH THIS KIT THE HEAD EXCHANGE CAN BE PERFORMED BY T RAINED SERVICE PERSONNEL AT CUS TOMER SITE WITHIN 8 HOURS. IF R EQUIRED THE AUTOMATIC NOZZLE CH ANGER FOR THE 12-SEGMENT COLLEC T AND PLACE HEAD HAS TO BE ORDE RED SEPARATELY. |--| A1D00117260
|
Siemens
|
|
A1D00119940
|
MODULAR SINGLE CONVEYOR D4 WITH FIXED RAIL RIGHT/LEFT (CHOOSE IN CONFIGURATION 119626/119628) FOR PLACEMENT STATION D4. ARTI CLE HAS TO BE CONFIGURATED WITH THE ORDER OF PLACEMENT STATION D4. WITH THIS NEW TRANSPORT T HE PCB IS CLAMPED TO TOP SIDE, THAT MEANS THE PLACEMENT LEVEL IS ALWAYS ON THE SAME HEIGHT, I NDEPENDENT FROM PCB-THICKNESS. THE NEW TRANSPORT OFFERS SHORT PCB CHANGE TIME AND THE POSSIBI LITY TO CHANGE EASILY THE FIXED RAIL RIGHT <,->, LEFT. PCB-DIMEN SIONS: L X W, STANDARD: 50MM X 50MM TO 368MM X 460MM. EXTENDED DIMENSIONS WITH THE LONG BOARD OPTION (119427): 50MM X 110MM TO 610MM X 460MM. |--| A1D00119940
|
Siemens
|
|
A1D00117261-03
|
THE HEAD RE-CONFIGURATION KIT I S NECESSARY TO EXCHANGE THE COL LECT AND PLACE HEAD OF SIPLACE PLACEMENT STATION WITH HEAD MOD ULARITY, SIPLACE F5 HM (117500) , IN A 6-SEGMENT COLLECT AND PL ACE HEAD. THE KIT INCLUDES: 6-S EGMENT COLLECT AND PLACE HEAD, SET NOZZLES, SET SLEEVES, COVER , TOOLS FOR HEAD EXCHANGE, BOX FOR REPLACED HEAD, TECHNICAL MA NUEL. WITH THIS KIT THE HEAD EX CHANGE CAN BE PERFORMED BY TRAI NED SERVICE PERSONNEL AT CUSTOM ER SIDE WITHIN 8 HOURS. IF REQU IRED THE AUTOMATIC NOZZLE CHANG ER FOR THE 6-SEGMENT COLLECT AN D PLACE HEAD HAS TO BE ORDERED SEPARATELY. |--| A1D00117261-03 |--| A1D0011726103
|
Siemens
|
|
A1D00119942
|
MODULAR DUAL CONVEYOR D4 WITH F IXED RAIL RIGHT/LEFT (CHOOSE IN CONFIGURATION 119626/119628) F OR PLACEMENT STATION D4. ARTICL E HAS TO BE CONFIGURATED WITH T HE ORDER OF PLACEMENT STATION D 4. WITH THIS NEW TRANSPORT TH E PCB IS CLAMPED TO TOP SIDE, T HAT MEANS THE PLACEMENT LEVEL I S ALWAYS ON THE SAME HEIGHT, IN DEPENDENT FROM PCB-THICKNESS. T HE NEW TRANSPORT OFFERS SHORT P CB CHANGE TIME AND THE POSSIBIL ITY TO CHANGE EASILY THE FIXED RAIL RIGHT <,->, LEFT. PCB-DIMENS IONS: L X W, STANDARD: 50MM X 5 0MM TO 368MM X 216MM, EXTENDED DIMENSIONS WITH THE LONG BOARD OPTION (119427/119428): 50MM X 110MM TO 610MM X 216MM. FOR THE |--| A1D00119942
|
Siemens
|
|
A1D00117500
|
SMD PLACEMENT STATION FOR END-O F-LINE/HIGH-END COMPONENTS WITH A MAXIMUM PLACEMENT RATE OF 11 ,000 COMPONENTS PER HOUR. FOR D ETAILS SEE CURRENT VALID SCOPE OF SERVICE AND DELIVERY. THE PL ACEMENT STATION PROVIDES A COMP ONENT CAPACITY OF MAXIMUM 118 X 8MM TAPES. THE PLACEMENT STATI ON IS EQUIPPED WITH ONE PICK AN D PLACE HEAD AND ALTERNATIVE WI TH A 12-SEGMENT COLLECT AND PLA CE HEAD OR A 6-SEGMENT COLLECT AND PLACE HEAD WITH INTEGRATED COMPONENT VISION. BY ORDER OF T HE PLACEMENT STATION AN ADDITIO NAL DEFINITION OF THE COLLECT A ND PLACE HEAD CONFIGURATION IS REQUIRED: 12-SEGMENT COLLECT AN D PLACE HEAD ITEM NO. 118016. 6 |--| A1D00117500
|
Siemens
|
|
A1D00119967
|
IN SIPLACE X4I FEEDER CAPACITY IS REDUCED COMPARED TO THE OTHE R SIPLACE X-SERIES MACHINES BY 6 FEEDER SLOTS IN SETUP ARE 2 A ND 4. THIS ITEM NUMBER AVOIDS T HE SETUP OF FEEDERS IN THIS ARE A. IN ADDITION ONE OF THE TWO C OT FIDUCIALS IS ATTACHED TO FIL LINGPART. AS THIS FIDUCIAL MUST ALWAYS BE AVAILABLE, SO THE FI LLINGPART IS MANDATORY ON SETUP AREA 2 AND 4 FOR SIPLACE X4I. IN THE DELIVERY OF SIPLACE X4I TWO FILLINGPARTS ARE INCLUDED. THIS ITEM NUMBER NEEDS TO BE OR DERED WHEN ADDITIONAL CHANGEOVE R TABLES ARE USED IN PRODUCTION FOR SETUP CHANGE. |--| A1D00119967
|
Siemens
|
|
A1D00340656-01
|
VIDEOMULTIPLEXER COVER SIPLACE S15 |--| A1D00340656-01 |--| A1D0034065601
|
Siemens
|
|
A1D00117520
|
BY USE OF THE OPTION NOZZLE SPL ITTING THE NOZZLE MAGAZINES OF A 12-SEGMENT COLLECT AND PLACE HEAD CAN BE EQUIPPED WITH DIFFE RENT NOZZLE TYPES. THE NOZZLES ARE ASSIGNED TO THE MAGAZINES V IA THE USER INTERFACE OF THE ST ATION COMPUTER. STATION COMPUTE R SOFTWARE 407.04 IS MANDATORY FOR THIS OPTION. THE OPTION INC LUDES: INSTALLATION-CD WITH SOF TWARE DESCRIPTION, LICENCE FOR ONE PLACEMENT MACHINE. |--| A1D00117520
|
Siemens
|
|
A1D00344687-02
|
TRANSPORT PROTECTION |--| A1D00344687-02 |--| A1D0034468702
|
Siemens
|
|
A1D00340657-01
|
VIDEOMULTIPLEXER COVER |--| A1D00340657-01 |--| A1D0034065701
|
Siemens
|
|
A1D00344686-02
|
ECCENTRIC DISC |--| A1D00344686-02 |--| A1D0034468602
|
Siemens
|
|
A1D00340997-01
|
S20 COMP.TABLE BELT CONTAINER |--| A1D00340997-01 |--| A1D0034099701
|
Siemens
|
|
A1D00340871-03
|
FRICTION BLOCK |--| A1D00340871-03 |--| A1D0034087103
|
Siemens
|
|
A1D00344757-01
|
TRACK RULER COMPONENTS TABLE LO CK |--| A1D00344757-01 |--| A1D0034475701
|
Siemens
|
|
A1D00344769S02
|
MVS200/EDA1(ICOS) V2185 XC75 |--| A1D00344769S02
|
Siemens
|
|
A1D00340871-04
|
FRICTION BLOCK |--| A1D00340871-04 |--| A1D0034087104
|
Siemens
|
|
A1D00344692S01
|
PROTCTIVE JACKET FOR RIBBON CAB LE |--| A1D00344692S01
|
Siemens
|
|
A1D00341032S01
|
SOCKET F. VACUUM GENERATOR DLM1 |--| A1D00341032S01
|
Siemens
|
|
A1D00344689-01
|
COMPONENTSTABLEACTUATOR |--| A1D00344689-01 |--| A1D0034468901
|
Siemens
|
|
A1D00341050-02
|
CABLE HS50: POWER SUPPLY MONITO R 1 |--| A1D00341050-02 |--| A1D0034105002
|
Siemens
|
|
A1D00341004-01
|
S20 COMP.TABLE TABLE-TOP COMPLE TE |--| A1D00341004-01 |--| A1D0034100401
|
Siemens
|
|
A1D00344764-02
|
NOZZLE REJECT-BOX |--| A1D00344764-02 |--| A1D0034476402
|
Siemens
|
|
A1D00344764-01
|
NOZZLE REJECT-BOX |--| A1D00344764-01 |--| A1D0034476401
|
Siemens
|
|
A1D00344771S03
|
POWER SUPPLY UNIT |--| A1D00344771S03
|
Siemens
|
|
A1D00344771S04
|
POWER SUPPLY UNIT |--| A1D00344771S04
|
Siemens
|
|
A1D00341183S01
|
HOSE COMPL. / DLM1 |--| A1D00341183S01
|
Siemens
|
|
A1D00341071-02
|
CABLE HS50: SUPPLY CONNECTION M ONITOR 2 |--| A1D00341071-02 |--| A1D0034107102
|
Siemens
|
