ÃëàâíàÿÊàòàëîãsiemensA1DA1D0A1D00
 

A1D00

Àðòèêóë Íàèìåíîâàíèå Ïðîèçâîäèòåëü
A1D00119720 PACKAGE FOR PLACEMENT OF 0201 C OMPONENTS (SIZE 0.6MM X 0.3MM). SUITABLE FOR SIPLACE X/D-SERIE S EQUIPPED WITH THE 12-SEGMENT COLLECT AND PLACE HEAD. THE PAC KAGE INCLUDES: HIGH RESOLUTION CAMERA (EXCHANGE BETWEEN STANDA RD DIGITAL COMPONENT CAMERA. TH E STANDARD DIGITAL COMPONENT CA MERA IS THEN NOT PART OF DELIVE RY), 24 X NOZZLE TYPE 906 OVAL TIP,COMPONENT SENSOR, RECONFIGU RATION INSTRUCTIONS FOR 0201 P LACEMENT. A 0201 PAKET IS ESSEN TIAL FOR EACH PLACEMENT HEAD. I N ADDITION FOR THE D-SERIES (AN D X-SERIES EQUIPPED WITH S-FEED ERS) THE SPECIAL 3X8MM 0201 FEE DER MODULE IS NECESSARY FOR ANY 0201 PLACEMENT (ITEM NUMBER: 1 |--| A1D00119720 Siemens
A1D00119719 MEASUREMENT DEVICE FOR INSPECTI ON OF THE CO-PLANARITY FOR LEAD ED COMPONENTS, WHEN HAVING GULL WINGS. FOR USE WITH TWIN HEAD I N SIPLACE X2/X3/D3. ONLY IN THE SECOND PLACEMENT AREA. |--| A1D00119719 Siemens
A1D00119720S01 0201 PACKAGE FOR 12 C+P, X / D- SERIES |--| A1D00119720S01 Siemens
A1D00116815-02 MOVEABLE MAGAZINE OF SIZE II/PS WITH SECURE LOCK. WIDTH ADJUST MENT FROM50 TO 259MM. THE MAXIM UM PCB LENGTH IS 399MM AND THE MAGAZINE HAS ASTORAGE CAPACITY OF UP TO 50 PIECES WITH A 10MM SPACING. MAGAZINEDIMENSIONS ARE 320 X 400 X 567MM.(W X L X H). MATERIAL IS POLYSTYROL(PS). MA X. 15 MIN AT 55 DEGREE CELSIUS. |--| A1D00116815-02 |--| A1D0011681502 Siemens
A1D00119723 ONLY FOR INITAL MACHINE ORDER.I NTERFACE BETWEEN SIPLACE X-SERI ES PLACEMENT STATION AND CHANGE OVER TABLE FOR SIPLACE X-FEEDER S. WHEN ORDERING A PLACEMENT ST ATION ONE INTERFACE PER CHANGEO VER TABLE X-FEEDER (ITEM NO: 11 9722) MUST BE ORDERED. MAX. 4 P ER PLACEMENT STATION. FOR ADDIT IONAL CHANGEOVER TABLES E.G. FO R OFFLINE SETUP VERIFICATION NO INTERFACE IS NECESSARY. THE IN TERFACE IS MOUNTED FIXED IN THE PLACEMENT STATION.EQUIPMENT AT CUSTOMER CONTACT SERVICE. |--| A1D00119723 Siemens
A1D00116814 MECHANICAL CERAMIC SUBSTRATE CE NTERING FOR SIPLACE S-20,S-23 H M,F4,F4-6,F5,F5 HM AND SIPLACE S-25 HM, PRECEDING VERSIONS WIT H PCB-HANDLING TYPE 2. THE SUBS TRATE IS MECHANICALLY FIXED IN X AND Y DIRECTION. THERE IS NO NEED TO CENTER OPTICALLY BY MEA NS OF THE PCB CAMERA USING SUBS TRATE FIDUCIALS. NEVERTHELESS T HE CENTERING ACCURACY CAN BE IN CREASED BY USING THE PCB CAMERA SYSTEM OF AVAILABILITY OF PROP ER SUBSTRATE FIDUCIALS. SUBSTRA TE DIMENSIONS: 2 INCH X 2 INCH TO 4 INCH X 7 INCH. |--| A1D00116814 Siemens
A1D00116807-01 SMEMA INTERFACE FOR SINGLE AND DUAL CONVEYOR SIPLACE S/F. |--| A1D00116807-01 |--| A1D0011680701 Siemens
A1D00119722 COMPONENT FEEDER CHANGEOVER TAB LE WITH 40 X-FEEDER SLOTS FOR S IPLACE X-SERIES MACHINES, 830MM -950MM WITH INTEGRATED REEL CON TAINER AND WHEELS FOR MINIMIZAT ION OF SETUP TIMES. |--| A1D00119722 Siemens
A1D00116807 SMEMA INTERFACE FOR SINGLE AND DUAL CONVEYOR SIPLACE S/F. |--| A1D00116807 Siemens
A1D00119731 12-SEGMENT COLLECT AND PLACE HE AD FOR SIPLACE X-SERIE PLACEMEN T STATIONS. THE HEAD CAN BE USE D ON ALL PLACEMENT STATIONS OF THE X-SERIES, THE RESPECTIVE CO MPONENT CAMERA IS INCLUDED. THE COMPONENT RANGE IS FROM 1MM X 0.5MM (0402) UP TO 18.7MM X 18. 7MM SIZED COMPONENTS, WITH A MA XIMUM HEIGHT OF 6MM AND A MAX W EIGHT OF 2G.. FOR MORE DETAILS REFER TO THE SPECIFICATION AND THE VALID SCOPE OF DELIVERY. FO R EASY EXCHANGE OF NOZZLE THE U SE OF A NOZZLE CHANGER IS RECOM MENDED. THE NOZZLE CHANGER IS O PTIONALLY AVAILABLE (ITEM NO: 1 19661/119663). IN ADDITION A HI GH RESOLUTION CAMERA, IMPROVING THE COMPONENT RANGE (0.6MM X 0 |--| A1D00119731 Siemens
A1D00116808 SIPLACE PLACEMENT STATION INTER FACE SIEMENS. THESE ITEM NO. IS USED FOR INTERFACE CONFIGURATI ON OF THE CONVEYOR AT SIPLACE H F/X-SERIES/D3 PLACEMENT STATION . DEPENDING ON THE CONVEYOR TYP E THE CORRESPONDING QUANTITY OF INTERFACE CABLE SIPLACE -- SIP LACE (00303636-02) FOR THE CONE CTION OF THE SUCCESSION PLACEME NT STATION WILL BE DELIVERED. S TANDARD IS SMEMA. |--| A1D00116808 Siemens
A1D00119733 SIPLACE TWIN HEAD FOR SIPLACE X -SERIES. THE TWIN HEAD CONSISTS OF TWO AUTONOMOUS WORKING PICK AND PLACE MODULES. INCLUDED IN DELIVERY ARE A STATIONARY COMP ONENT CAMERA AND 1 NOZZLE CHANG ER WITH 3 STANDARD NOZZLE MAGAZ INES (ITEM NO 03005191) FOR E ACH 2 NOZZLES AND 1 SOKO NOZZLE MAGAZINE (ITEM NO 03001807). W ITH THIS HEAD A COMPONENT RANGE FROM 1MM X 0.5MM (0402) UP TO 55MM X 45MM OR UP TO 69MM X 10 MM TO 85MM X 85MM (SINGLE NOZZL E OPERATION) CAN BE PLACED. LAR GER COMPONENTS ON REQUEST. MAX. COMPONENT HEIGHT 25MM. MAX WEI GHT (COMPONENT + NOZZLE/GRIPPER ): 30GR.(STANDARD), 100GR.(WITH REDUCED SPEED). PROGRAMMABLE P |--| A1D00119733 Siemens
A1D00119732 20-SEGMENT COLLECT AND PLACE HE AD FOR SIPLACE X-SERIES PLACEME NT MACHINES. THIS VERY HIGH SPE ED HEAD CAN BE USED ON ALL MACH INES OF SIPLACE X-SERIES MACHIN ES, THE RESPECTIVE COMPONENT CA MERA IS INCLUDED. THE COMPONENT RANGE IS FROM 01005 TO 6MM X 6 MM SIZED COMPONENTS WITH A HEIG HT UP TO 4MM AND A WEIGHT OF 1G .. FOR MORE DETAILS REFER TO TH E SPECIFICATION AND THE VALID S COPE OF DELIVERY. THE HEAD IS E QUIPPED WITH A COMPONENT SENSOR . THE SENSOR CONTROLS THE ABSEN CE AND PRESENCE OF A COMPONENT DIRECTLY AT THE PICKUP AND PLAC E POSITION. WHEN USING THIS HEA D IN A TWO GANTRY AREA OF A MAC HINE BOTH GANTRY HAVE TO BE EQU |--| A1D00119732 Siemens
A1D00119730 6-SEGMENT COLLECT AND PLACE HEA D FOR SIPLACE X-SERIE. THE HEAD CAN BE USED ON ALL PLACEMENT S TATIONS OF THE X-SERIES, THE RE SPECTIVE COMPONENT CAMERA IS IN CLUDED. THE COMPONENT RANGE IS FROM 0.6MM X 0.3MM (0201) UP TO 27MM X 27MM SIZED COMPONENTS, WITH A MAXIMUM HEIGHT OF 8.5 MM AND A WEIGHT OF 5G.. FOR MORE DETAILS REFER TO THE SPECIFICAT ION AND THE VALID SCOPE OF DELI VERY. FOR EASY EXCHANGE OF NOZZ LE THE USE OF A NOZZLE CHANGER IS RECOMMENDED. THE NOZZLE CHAN GER IS OPTIONALLY AVAILABLE (IT EM NO: 119662/119664). THIS ITE M NUMBER IS FOR CONFIGURATION P URPOSE ONLY. THIS ITEM NUMBER C AN ONLY BE ORDERED IN COMBINATI |--| A1D00119730 Siemens
A1D00116819-02 MOVEABLE MAGAZINE OF SIZE III/P S WITH SECURE LOCK. WIDTH ADJUS TMENTFROM 100 TO 460MM. THE MAX IMUM PCB LENGTH IS 399MM AND TH E MAGAZINE HASA STORAGE CAPACIT Y OF UP TO 30 PIECES WITH A 10M M SPACING. MAGAZINEDIMENSIONS A RE 525 X 410 X 367MM (W X L X H ) MATERIAL IS POLYSTYROL(MAGAZI NE PLATE) AND POLYCARBONATE (SI DE PARTS), TILL 55 DEGREESCELSI US, MAX. TIME IN OVEN 15 MIN. P CB TEMPERATURE TILL 80 DEGREES. |--| A1D00116819-02 |--| A1D0011681902 Siemens
A1D00116816-02 MOVEABLE MAGAZINE OF SIZE II PS /PC WITH SECURE LOCK. WITDH ADJ USTMENTFROM 50 TO 259MM. THE MA XIMUM PCB LENGTH IS 399MM AND T HE MAGAZINES HASA STORAGE CAPAC ITY OF UP TO 50 PIECES WITH A 1 0MM SPACING. MAGAZINEDIMENSIONS ARE 320 X 400 X 567MM (W X L X H). MATERIAL IS POLYSTYROL(MAG AZINE PLATE) AND POLYCARBONAT ( SIDE PARTS), TILL 55 DEGREE CEL SIUS,TIME IN OVEN MAX. 15 MIN. PCB TEMPERATURE UP TO 80 DEGREE S CELSIUS. |--| A1D00116816-02 |--| A1D0011681602 Siemens
A1D00116848 FOR X-SERIES/D3.THE SENSOR VERI FIES IF THE COMPONENT REJECT BI N IS MOUNTED BACK CORRECTLY. TH IS AVOIDS HEAD CRASHES. THE ORD ER OF THE SENSOR IS RECOMMENDED ESPECIALLY FOR THE 20-SEG. C+P HEAD. THIS OPTION IS ONLY FOR ONE SETUP AREA. THE OPTION IS R EQUIRED 4TIMES PER MACHINE, IND EPENDENT FROM THE NUMBER OF GAN TRIES. |--| A1D00116848 Siemens
A1D00119750 3 GANTRY SMD PLACEMENT STATION SIPLACE X3 WITH MAXIMUM BENCHMA RK PLACEMENT RATE OF 69.500 CPH . ONE OF THE FOLLOWING CONFIGU RATIONS MUST BE SELECTED: - 771 19750 SIPLACE X3 WITH SOFTWARE 60X, - 77119751 SIPLACE X3-A WI TH SOFTWARE 70X EQUIPPED WITH 3 C+P HEADS (20 OR CPP), - 77119 752 SIPLACE X3-B WITH SOFTWARE 70X EQUIPPED WITH 2 C+P HEADS ( 20 OR CPP) AND 1 TWIN HEAD, - 7 7119753 SIPLACE X3-C WITH SOFTW ARE 70X EQUIPPED WITH 1 C+P HEA DS (20 OR CPP) AND 2 TWIN HEADS , - 77119754 SIPLACE X3-D WITH SOFTWARE 70X EQUIPPED WITH 3 TW IN HEADS FOR DETAILED TECHNICA L INFORMATION PLEASE REFER TO T HE CURRENT SCOPE OF DELIVERY AN |--| A1D00119750 Siemens
A1D00116920 SIPLACE SETUP CENTER BASIC PACK AGE. THIS SOFTWARE PACKAGE FOR BASIC SETUP VERIFICATION IS RE QUIRED ONE TIME PER FACTORY FOR SIPLACE C/S/F, HS-XX, HFX, XX AND DX. THE FOLLOWING SOFTWARE COMPONENTS ARE INCLUDED:BASIC SOFTWARE PACKAGE (1 PCS), SETUP CONTROL DATABASE (MSDE) (1 PCS ). |--| A1D00116920 Siemens
A1D00116818-02 MOVEABLE MAGAZINE OF SIZE III/P S WITH SECURE LOCK. WIDTH ADJUS TMENTFROM 100 TO 460MM. THE MAX IMUM PCB LENGTH IS 399MM AND TH E MAGAZIN HASA STORAGE CAPACITY OF UP TO 30 PIECES WITH A 10MM SPACING. MAGAZINEDIMENSION ARE 525 X 410 X 367MM (W X L X H) MATERIAL IS POLYSTYROL(MAGAZINE PLATE AND SIDE PARTS) TILL 55 D EGREES CELSIUS, MAX. TIME INOVE N 15 MIN. |--| A1D00116818-02 |--| A1D0011681802 Siemens
A1D00119760 THE 12-SEGMENT COLLECT AND PLAC E HEAD DIGITAL RE-CONFIGURATION KIT IS NECESSARY TO EXCHANGE T HE ACTUAL PLACEMENT HEAD OF THE SIPLACE X-SERIES/D3 (119700,11 9750,119780,119870) PLACEMENT M ACHINE WITH HEAD MODULARITY, IN A 12-SEGMENT COLLECT AND PLACE HEAD WITH DIGITAL CAMERA. THE KIT INCLUDES: 12-SEGMENT COLLEC T AND PLACE HEAD DIGITAL, SET N OZZLES, SET SLEEVES, COVER, HEA D SERVO CARDS, HEAD ADAPTER BOA RD, CABLES, ADDITIONAL PARTS, T OOLS FOR HEAD EXCHANGE, BOX FOR REPLACED HEAD AND A TECHNICAL MANUAL. WITH THIS KIT THE HEAD EXCHANGE CAN BE PERFORMED BY TR AINED SERVICE PERSONNEL AT CUST OMER SIDE WITHIN 8 HOURS. IF RE |--| A1D00119760 Siemens
A1D00119747-01 HOLDER FOR NOZZLE CHANGER TWINH EAD FOR MTC X-SER. |--| A1D00119747-01 |--| A1D0011974701 Siemens
A1D00119753 THE RE-CONFIGURATION KIT HIGHFO RCE HEAD IS NECESSARY TO EXCHAN GE THE TWINHEAD OF A PLACEMENT MACHINE OF SIPLACE HF/X-SERIES BY AN HIGHFORCE HEAD THE HIGHFO RCE HEAD IS A MODIFIED TWINHEAD , WHICH IS ABLE TO REACH PLACEM ENT FORCES UP TO 30N (+/-15%) W ITH SIPLACE HF/D3/X-SERIES. THE KIT INCLUDES: TWO HIGHFORCE PI CK AND PLACE MODULES, SERVO-CAR DS, ADDITIONAL PARTS, ONE SOFTW ARE CD, TOOLS FOR HEAD EXCHANGE , BOX FOR REPLACED HEAD AND A T ECHNICAL MANUAL. CUSTOMER SERVI CE IS NOT INCLUDED. IF THE CUST OMER SENDS THE USED TWINHEAD MO DULES BACK TO US, HE WILL GET A CREDIT OF 60% OF THE ORIGINAL SPARE PART PRICE (03001095S03). |--| A1D00119753 Siemens
A1D00116915 THIS RF SCANNER (DATALOGIC M131 ) IS NEEDED FOR THE COMPONENT S ETUP VERIFICATION WITH THE SIPL ACE SETUP CENTER BASIC PACKAGE, AT LEAST ONE TIME PER LINE. TH E CRADDLE IS INCLUDED IN THE PA CKAGE. |--| A1D00116915 Siemens
A1D00119762 THE 20-SEGMENT COLLECT AND PLAC E HEAD DIGITAL RECONFIGURATIONK IT IS NECESSARY TO EXCHANGE THE ACTUAL PLACEMENT HEAD OF THE S IPLACE X-SERIES (119700,119750, 119780) PLACEMENT MACHINE WITH HEAD MODULARITY, IN A 20-SEGMEN T COLLECT AND PLACE HEAD DIGITA L. THE KIT INCLUDES: 20-SEGMENT COLLECT AND PLACE HEAD, SET NO ZZLES, HEAD SERVO CARDS, HEAD A DAPTER BOARD, CABLES, ADDITIONA L PARTS, TOOLS FOR HEAD EXCHANG E, BOX FOR REPLACED HEAD AND A TECHNICAL MANUAL. WITH THIS KIT THE HEAD EXCHANGE CAN BE PERFO RMED BY TRAINED SERVICE PERSONN EL AT CUSTOMER SIDE WITHIN 8 HO URS. IF REQUIRED THE AUTOMATIC NOZZLE CHANGER (119715/119716) |--| A1D00119762 Siemens
A1D00119761 THE 6-SEGMENT COLLECT AND PLACE HEAD DIGITAL RE-CONFIGURATION KIT IS NECESSARY TO EXCHANGE TH E ACTUAL PLACEMENT HEAD OF THE SIPLACE X-SERIES/D3 (119700,119 750,119780,119870) PLACEMENT MA CHINE WITH HEAD MODULARITY, IN A 6-SEGMENT COLLECT AND PLACE H EAD WITH DIGITAL CAMERA. THE KI T INCLUDES: 6-SEGMENT COLLECT A ND PLACE HEAD DIGITAL, SET NOZZ LES, SET SLEEVES, COVER, HEAD S ERVO CARDS, HEAD ADAPTER BOARD, CABLES, ADDITIONAL PARTS, TOOL S FOR HEAD EXCHANGE, BOX FOR RE PLACED HEAD AND A TECHNICAL MAN UAL. WITH THIS KIT THE HEAD EXC HANGE CAN BE PERFORMED BY TRAIN ED SERVICE PERSONNEL AT CUSTOME R SIDE WITHIN 8 HOURS. IF REQUI |--| A1D00119761 Siemens
A1D00116921 SIPLACE SETUP CENTER BASIC PACK AGE. THIS SOFTWARE PACKAGE FOR BASIC SETUP VERIFICATION IS RE QUIRED ONE TIME PER FACTORY FOR SIPLACE C/S/F,HS-XX,HFX,XX. TH E FOLLOWING SOFTWARE COMPONENTS ARE INCLUDED:BASIC SOFTWARE PA CKAGE (1 PCS), SETUP CONTROL DA TABASE (MSDE) (1 PCS). |--| A1D00116921 Siemens
A1D00116919 SIPLACE SETUP CENTER BASIC PACK AGE. THIS SOFTWARE PACKAGE FOR BASIC SETUP VERIFICATION IS RE QUIRED ONE TIME PER FACTORY FOR SIPLACE C/S/F, HS-XX, HFX, XX AND DX. THE FOLLOWING SOFTWARE COMPONENTS ARE INCLUDED:BASIC SOFTWARE PACKAGE (1 PCS), SETUP CONTROL DATABASE (MSDE) (1 PCS ). |--| A1D00116919 Siemens
A1D00119770 4 GANTRY SMD PLACEMENT STATION WITH A MAXIMUM BENCHMARK PLACEM ENT RATE OF 120.000 CPH. THE F OLLOWING CONFIGURATIONS MUST BE SELECTED : - 77119771 - PLACE MENT STATION SIPLACE X4I-A EQUI PPED WITH 4 C+P HEADS (C+P20 OR CPP) FOR DETAILS SEE VALID SC OPE OF DELIVERY AND SPECIFICATI ONS SIPLACE X-SERIES POWERED B Y MULTISTAR SPECIFICATION 03/20 09 EDITION OR LATER . THE MAC HINE CAN BE EQUIPPED WITH A SIN GLE LANE TRANSPORT (ITEM NO: 11 9625), OR WITH A FLEXIBLE DUA L LANE TRANSPORT (ITEM NO: 1196 27), OR ALTERNATIVELY WITH A FL EXIBLE QUAD LANE (ITEM NO. 1665 61). INFORMATION REGARDING THE PCB SIZE CAN BE FOUND UNDER THE |--| A1D00119770 Siemens
A1D00116921-03 SIPLACE SETUP CENTER BASIC PACK AGE. THIS SOFTWARE PACKAGE FOR BASICSETUP VERIFICATION IS REQ UIRED ONE TIME PER FACTORY FOR SIPLACE C/S/F,HS-XX,HFX,XX,D-SE RIES. THE FOLLOWING SOFTWARE C OMPONENTS AREINCLUDED:BASIC SOF TWARE PACKAGE (1 PCS), SETUP CO NTROL DATABASE (MSDE)(1 PCS). |--| A1D00116921-03 |--| A1D0011692103 Siemens

Òîâàðû 1321 - 1350 èç 6747
 Íà÷àëî | Ïðåä. | 43 44 45 46 47 | Ñëåä. | Êîíåö | Âñå