| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
A1D00119330
|
THIS ITEM IS REQUIRED ONE TIME PER SIPLACE HS-50 WITH DUAL LAN E TRANSPORT, FOR INSTALLATION O F ONE OR MORE PCB-BARCODE READE RS (1D-READER OR 2D-READER HEAD S). THE FOLLOWING ITEMS ARE INC LUDED:MOUNTING BRACKET (2 PCS), DISTRIBUTION BOARD (1 PCS),ASSE MBLY MATERIAL AND CABLING,ADDIT IONALLY, ONE OR MORE PCB-BARCOD E READERS (ITEM 119679 OR 11968 2) ARE NEEDED. |--| A1D00119330
|
Siemens
|
|
A1D00119405-01
|
LONG BOARD OPTION FOR SIPLACE H S-50: WITH THIS OPTION WE CAN H ANDLE PCBS UP TO 610MM X 460MM (24 INCH X 18 INCH) IN THE SIN GLE CONVEYOR MODE. THIS OPTION CAN BE USED FOR SINGLE AND DUAL CONVEYOR SYSTEMS. |--| A1D00119405-01 |--| A1D0011940501
|
Siemens
|
|
A1D00119400
|
SMD PLACEMENT STATION WITH A MA XIMUM PLACEMENT RATE OF 60,000 COMPONENTS PER HOUR. FOR DETAIL S SEE THE CURRENT SCOPE OF SERV ICE AND DELIVERY. THE PLACEMENT STATION FEATURES A COMPONENT F EEDER CAPACITY OF 144 X 8MM TAP ES. FOUR 12-SEGMENT COLLECT AND PLACE HEADS WITH INTEGRATED CO MPONENT VISION SYSTEM ARE CAPAB LE TO HANDLE A COMPONENT RANGE FROM 0.6MM X 0.3MM (0201) UP TO 18.7MM X 18.7MM. FOR THE PLACE MENT OF 0201 COMPONENTS THE 020 1 PACKAGE PHASE 2 (ITEM NO. 118020) AND THE COMPONENT SENSO R (ITEM NO.118021) ARE RECOMMEN DED. THE PLACEMENT STATION WITH THE SINGLE CONVEYOR IS ABLE TO HANDLE PCBS FROM 50MM X 50MM ( |--| A1D00119400
|
Siemens
|
|
A1D00119406
|
WITH THE OPTION RETROFIT VACUUM PUMP HS-60/D4 A SIPLACE HS-60/D 4 CAN BE CONNECTED TO AN EXTERN AL VACUUMPUMP. THIS REDUCES THE AIR CONSUMPTION TO 400 NI/MIN. TO GUARANTEE THE SPECIFICATION OF SIPLACE HS-60/D4 THE VACUUM PUMP MUST FULFILL THE SPECIFICA TION OF SIEMENS. MORE DETAILS F ROM THE RESPECTIVE SALES OR SER VICE REPRESENTATIVE. |--| A1D00119406
|
Siemens
|
|
A1D00116380
|
SPLICE KIT INCLUDING ALL SIPLAC E PRODUCTS FOR A OPTIMAL SPLICI NG PROCEDURE. |--| A1D00116380
|
Siemens
|
|
A1D00119422
|
THE OPTION CONTAINS 4 FIXED FEE DER TABLES FOR A HS-60/HS-50, I NCLUSIVE TAPE CONTAINER AND WAS TE CONTAINER.CAN ONLY BE ORDERE D WITH A NEW MACHINE. |--| A1D00119422
|
Siemens
|
|
A1D00116385-01
|
THIS ITEM IS RECOMMENDED IN ADD ITION TO THE COMPONENT VERIFICA TION LINE BASIC PACKAGE FOR PLA CEMENT LINES WITH MORE THAN 4 M ACHINES. THE FOLLOWING ITEMS AR E INCLUDED: MOBILE HANDHELD TER MINAL PDT 3100 FOR 1D-CODES (1 PCS). |--| A1D00116385-01 |--| A1D0011638501
|
Siemens
|
|
A1D00116415S01
|
CRDL MEASUREMENT SYSTEM WITH VA RIABLE NOZZLE LENGTH FOR SIPLAC E 80F FOR THE VERIFICA- TION OF TWO TERMINAL COMPONENTS PROGRA MMABLE MEASUREMENT FUNCTIONS: - CAPACITANCE - RESITANCE - DIOD E POLARITY - REVERSE VOLTAGE FOR ZENER DIODES - INDUCTANC E - 1 X MEASUREMENT SYSTEM WITH CONTACTATION |--| A1D00116415S01
|
Siemens
|
|
A1D00119426
|
ADDITIONAL MECHANICAL PCB ALIGN MENT FOR HS-60/D4 SINGLE CONVEY OR: WITH THIS OPTION PCBS WITH A LENGTH/WIDTH RATIO >,2/1 CAN M OVE WITH THE SMALL SIDE AT THE SINGLE CONVEYOR BELTS INTO THE PLACEMENT AREA. THIS OPTION IS ONLY AVAILABLE FOR SINGLE CONVE YOR. |--| A1D00119426
|
Siemens
|
|
A1D00116390
|
COMMUNICATION SOFTWARE FOR THE FUNCTIONALITY: REMOTE SERVICE ON STATION LEVEL AND SIPLACE P RO. NETOP USES THE NAMES HOST F OR THE SOFTWARE ENABLING A COMP UTER TO BE REMOTE CONTROLLED.LI CENSE FOR 25 INSTALLATION PER S TATION COMPUTER OR SIPLACE PRO FOR WIN NT 4.0, WINDOWS 2000, W INDOWS XP OR LINUX. |--| A1D00116390
|
Siemens
|
|
A1D00116417S01
|
ADDITIONAL COMPONENT VISION MOD ULE SIPLACE 80 F/F4/F5 FOR FLIP CHIP BUMP CENTERING. FIELD OF VIEW: 9MMX11.5MM. LARGEST FLIP CHIP WITH SINGLE MEASUREMENT: 7 MM X 9MM.SMALLEST,RELIABLY RECO GNIZABLE BUMP DIAMETER: 0,1MM. RELIABLE PROCESSING OF IC PITCH : 0,25MM |--| A1D00116417S01
|
Siemens
|
|
A1D00116391
|
COMMUNICATION SOFTWARE FOR THE FUNCTIONALITY: REMOTE SERVICE G UEST.NETOP USES THE NAME GUEST FOR THE SOFTWARE ENABLING A COM PUTER TO REMOTE CONTROL ANOTHER COMPUTER.ONE INSTALLATION PER WORKSTATION FOR WIN NT 4.0,WIND OWS 2000 AND WINDOWS XP. |--| A1D00116391
|
Siemens
|
|
A1D00116392
|
COMMUNICATION SOFTWARE FOR THE FUNCTIONALITY: REMOTE SERVICE G ATEWAY. NETOP GATEWAY IS A NETO P HOST WITH THE ADDED CAPABILIT Y OF ROUTING NETOP TRAFFIC BETW EEN DIFFERENT COMMUNICATION DEV ICES.ONE INSTALLATION PER WORKS TATION FOR WIN NT 4.0,WINDOWS 2 000 AND WINDOWS XP. |--| A1D00116392
|
Siemens
|
|
A1D00119428
|
ADDITIONAL MECHANICAL STOPPER F OR LONG BOARDS AT SIPLACE HS-60 /D4 DUAL CONVEYOR. THESE STOPPE R IS A ADDITIONAL STOPPER UNIT FOR THE DUAL CONVEYOR. ADDITION AL THE LONG BOARD OPTION HS-60/ D4 (119427) IS REQUIRED. WITH T HE LONG BOARD OPTION THE DUAL C ONVEYOR CAN HANDLE PCBS UP TO 6 10MM X 216MM (24 INCH X 8.5INCH ). |--| A1D00119428
|
Siemens
|
|
A1D00119439
|
PIN MODULE FOR AVSP (AUTOMATIC VACUUM SUPPORT PINS) WITH 24 S UPPORT PINS. THESE SUPPORT PINS WILL BE SETUP IN A LEARNING MO DE TO THE TOPOLOGY OF A PCB BOT TOM SIDE AND CAN BE INDIVIDUALL Y CONFIGURED WITH STANDARD OR V ACUUM CUPS. THIS PIN BLOCK MUST MINIMUM BE ORDERED 1 TIME PER LIFTING TABLE. FOR EACH PLACEME NT STATION HS-60/D4 WITH SINGLE CONVEYOR 1 X RETROFITTING KIT (AVSP) SIPLACE HS-60/D4 SC 119 440 SHOULD BE PRESENT. FOR EACH PLACEMENT STATION HS-60/D4 WIT H DOUBLE CONVEYOR 1 X RETROFIT TING KIT (AVSP) SIPLACE HS-60/D 4 DC 119441 SHOULD BE PRESENT. |--| A1D00119439
|
Siemens
|
|
A1D00119427
|
ADDITIONAL MECHANICAL STOPPER F OR LONG BOARDS AT SIPLACE HS-60 /D4 SINGLE CONVEYOR. WITH THIS ADDITIONAL STOPPER THE TRANSPOR T CAN HANDLE PCBS UP TO 610MM X 460MM (24 INCH X 18 INCH) IN THE SINGLE OR DUAL CONVEYOR. FO R DUAL CONVEYOR THE STOPPER WIT H ITEM NO. 119428 HAS TO BE ORD ERED ADDITIONAL. |--| A1D00119427
|
Siemens
|
|
A1D00116417-01
|
ADDITIONAL COMPONENT CAMERA MOD ULE SIPLACE F5 HM FOR FLIP CHIP BUMP CENTERING. FIELD OF VIEW: 9MM X 11.5MM. LARGEST FLIP CHI P WITH SINGLE MEASUREMENT: 7MM X 9MM. SMALLEST, RELIABLY RECOG NIZABLE BUMP DIAMETER: 0.08MM. RELIABLE PROCESSING OF IC PITCH : 0.25MM. |--| A1D00116417-01 |--| A1D0011641701
|
Siemens
|
|
A1D00116417
|
ADDITIONAL COMPONENT CAMERA MOD ULE SIPLACE F5 HM FOR FLIP CHIP BUMP CENTERING. FIELD OF VIEW: 9MM X 11.5MM. LARGEST FLIP CHI P WITH SINGLE MEASUREMENT: 7MM X 9MM. SMALLEST, RELIABLY RECOG NIZABLE BUMP DIAMETER: 0.1MM. R ELIABLE PROCESSING OF IC PITCH: 0.25MM. |--| A1D00116417
|
Siemens
|
|
A1D00116428
|
WAFFLE-PACK CHANGER FOR SIPLACE F5 HM COMBINED WITH FIXED COMP ONENT TABLE FOR TRANSPORT HEIGH T 900MM. VERSION FOR 230/110V. STORAGE CAPACITY OF 28 WTC (WAF FLE PACK TRAY CARRIER), MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2.5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE-PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. |--| A1D00116428
|
Siemens
|
|
A1D00116427
|
WAFFLE-PACK CHANGER FOR SIPLACE F5 HM COMBINED WITH FIXED COMP ONENT TABLE FOR TRANSPORT HEIGH T 830MM. VERSION FOR 230/110V. STORAGE CAPACITY OF 28 WTC (WAF FLE PACK TRAY CARRIER), MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2.5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE-PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. |--| A1D00116427
|
Siemens
|
|
A1D00119460
|
FIXED CONVEYOR RAIL RIGHT SIDE. TO TRANSPORT TWO PCBS. SYNCHRO NOUS OR ASYNCHRONOUS TRANSPORT MODE. ITEM HAS TO BE ORDERED WI TH THE PLACEMENT STATION. WITH THIS NEW TRANSPORT THE PCB IS C LAMPED TO TOP SIDE, THAT MEANS THE PLACEMENT LEVEL IS ALWAYS O N THE SAME HEIGHT, INDEPENDENT FROM PCB-THICKNESS. THE NEW TRA NSPORT OFFERS SHORT PCB CHANGE TIME AND THE POSSIBILITY TO CHA NGE EASILY THE FIXED RAIL RIGHT - LEFT. PCB-DIMENSIONS: L X W, STANDARD: 50MM X 50MM TO 368MM X 460MM, EXTENDED DIMENSIONS W ITH THE LONG BOARD OPTION: 50MM X 110MM TO 610MM X 460MM (508M M EXTRA WIDTH ON REQUEST). |--| A1D00119460
|
Siemens
|
|
A1D00119455
|
WIDE BOARD OPTION OFFERS THE PO SSIBILITY TO PROCESS WIDE PCBS ON AN HS60/D4. THEREFORE IT IS NECESSARY TO DO SOME MODIFICATI ONS AT THE LIMIT SWITCHES OF Y- AXIS AND TO MOVE THE POSITION O F THE FIXED RAIL OF THE CONVEYO R. BY USE OF THIS OPTION, BOARD S WITH A WIDTH UP TO 508MM CAN BE HANDLED BY AN HS60/D4 WITH S INGLE CONVEYOR. FOR DUAL CONVEY OR THE MAXIMUM PCB WIDTH IS 242 MM IN DUAL CONVEYOR MODE AND 38 0MM IN SINGLE CONVEYOR MODE. AT TENTION: IT IS NOT POSSIBLE TO USE SYNCHRONOUS DUAL CONVEYOR I N COMBINATION WITH WIDE BOARD O PTION. PRECONDITIONS: LINE SOFT WARE SIPLACE PRO 2.1 OR HIGHER, STATION SOFTWARE 505.03 OR HIG |--| A1D00119455
|
Siemens
|
|
A1D00116421S03
|
ADDITIONAL NOZZLE CHANGER FOR I C HEAD |--| A1D00116421S03
|
Siemens
|
|
A1D00119455-01
|
WIDE BOARD OPTION OFFERS THE PO SSIBILITY TO PROCESS WIDE PCBS ON ANHS60/D4. THEREFORE IT IS N ECESSARY TO DO SOME MODIFICATIO NS AT THE LIMITSWITCHES OF Y-AX IS AND TO MOVE THE POSITION OF THE FIXED RAIL OF THECONVEYOR. BY USE OF THIS OPTION, BOARDS W ITH A WIDTH UP TO 508MM CAN BEH ANDLED BY AN HS60/D4 WITH SINGL E CONVEYOR. FOR DUAL CONVEYOR T HEMAXIMUM PCB WIDTH IS 242MM IN DUAL CONVEYOR MODE AND 380MM I N SINGLECONVEYOR MODE. ATTENTIO N: IT IS NOT POSSIBLE TO USE SY NCHRONOUS DUALCONVEYOR IN COMBI NATION WITH WIDE BOARD OPTION. PRECONDITIONS: LINE SOFTWARE SI PLACE PRO 2.1 OR HIGHER, STATIO N SOFTWARE505.03 OR HIGHER. |--| A1D00119455-01 |--| A1D0011945501
|
Siemens
|
|
A1D00116429-04
|
WAFFLE-PACK CHANGER FOR SIPLACE F4, F5 HM COMBINED WITH FIXED COMPONENT TABLE FOR TRANSPORT H EIGHT 930MM. VERSION FOR 230/11 0V. STORAGE CAPACITY OF 28 WTC (WAFFLE PACK TRAY CARRIER), MAX . SIZE OF WAFFLE PACK TRAY 240M M X 340MM X 13MM. TRAY CHANGEOV ER TIME 2.5S. 10 FEEDER LOCATIO NS REQUIRED FOR WAFFLE PACK CHA NGER, RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. |--| A1D00116429-04 |--| A1D0011642904
|
Siemens
|
|
A1D00116427-04
|
WAFFLE-PACK CHANGER FOR SIPLACE F5 HM COMBINED WITH FIXED COMP ONENT TABLE FOR TRANSPORT HEIGH T 830MM. VERSION FOR 230/110V. STORAGE CAPACITY OF 28 WTC (WAF FLE PACK TRAY CARRIER), MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2.5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE-PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. |--| A1D00116427-04 |--| A1D0011642704
|
Siemens
|
|
A1D00119461
|
FIXED CONVEYOR RAIL LEFT SIDE.I TEM HAS TO BE ORDERED WITH THE PLACEMENT STATION. WITH THIS NE W TRANSPORT THE PCB IS CLAMPED TO TOP SIDE, THAT MEANS THE PLA CEMENT LEVEL IS ALWAYS ON THE S AME HEIGHT, INDEPENDENT FROM PC B-THICKNESS. THE NEW TRANSPORT OFFERS SHORT PCB CHANGE TIME AN D THE POSSIBILITY TO CHANGE EAS ILY THE FIXED RAIL RIGHT <,->, LE FT. PCB-DIMENSIONS: L X W, STAN DARD: 50MM X 50MM TO 368MM X 46 0MM. EXTENDED DIMENSIONS WITH T HE LONG BOARD OPTION: 50MM X 11 0MM TO 610MM X 460MM (508MM EXT RA WIDTH ON REQUEST). |--| A1D00119461
|
Siemens
|
|
A1D00116429
|
WAFFLE-PACK CHANGER FOR SIPLACE F5 HM COMBINED WITH FIXED COMP ONENT TABLE FOR TRANSPORT HEIGH T 930MM. VERSION FOR 230/110V. STORAGE CAPACITY OF 28 WTC (WAF FLE PACK TRAY CARRIER), MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2.5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. |--| A1D00116429
|
Siemens
|
|
A1D00119462
|
FIXED CONVEYOR RAIL RIGHT SIDE TO TRANSPORT TWO PCBS. SYNCHRON OUS OR ASYNCHRONOUS TRANSPORT M ODE. ITEM HAS TO BE ORDERED WIT H THE PLACEMENT STATION. WITH T HIS NEW TRANSPORT THE PCB IS CL AMPED TO TOP SIDE, THAT MEANS T HE PLACEMENT LEVEL IS ALWAYS ON THE SAME HEIGHT, INDEPENDENT F ROM PCB-THICKNESS. THE NEW TRAN SPORT OFFERS SHORT PCB CHANGE T IME AND THE POSSIBILITY TO CHAN GE EASILY THE FIXED RAIL RIGHT - LEFT. PCB-DIMENSIONS: L X W, STANDARD: 50MM X 50MM TO 368MM X 216MM, EXTENDED DIMENSIONS WI TH THE LONG BOARD OPTION: 50MM X 110MM TO 610MM X 216MM (242MM EXTRA WIDTH ON REQUEST). |--| A1D00119462
|
Siemens
|
|
A1D00119475
|
PCB VISION MODULE MULTICOLOR FO R PLACEMENT STATIONS HS60 AND H S50 WITH INTEGRATED OBLIQUE IR- AND BLUE ILLUMINATION.COMPACT U NIT.FOR BEST RECOGNITION OF BAR E PCB FIDUCIALS ON BRIGHT PCB B ASIS MATERIAL (CERAMIC SUBSTRAT ES, CEM ETC.), FLEX BOARDS AND FLUCTUATIONS OF PCB SURFACES. C OMFORTABLE HANDLING AND ADJUSTM ENT. ITEM NUMBER ONLY FOR NEW M ACHINES, FOR RETROFIT PART NUMB ER 358031. |--| A1D00119475
|
Siemens
|
