| Àðòèêóë |
Íàèìåíîâàíèå |
Ïðîèçâîäèòåëü |
|
A1D00116075-01
|
SET OF 12 MAGNETIC SUPPORT PINS FOR LARGE PCBS FOR SIPLACE S, F AND COMPACT. |--| A1D00116075-01 |--| A1D0011607501
|
Siemens
|
|
A1D00118092-01
|
SMEMA INTERFACE SIPLACE S-25 HM . |--| A1D00118092-01 |--| A1D0011809201
|
Siemens
|
|
A1D00118100
|
MECHANICAL HEAD CRASH PROTECTIO N FOR SIPLACE S TO AVOID A HEAD CRASH WITH FEEDERS AND/OR FEED ER FLAPS. RESTRICTION 6-SEGMENT COLLECT AND PLACE HEAD WITH NO ZZELS TYPE 820/821/921. |--| A1D00118100
|
Siemens
|
|
A1D00116078-01
|
THIS ITEM IS REQUIRED ONE TIME PER SIPLACE S OR F FOR EXTENDED SETUP VERIFICATION WITH CORDED SCANNER. THE FOLLOWING ITEMS A RE INCLUDED: CORDED SCANNER (1 PCS). |--| A1D00116078-01 |--| A1D0011607801
|
Siemens
|
|
A1D00118101
|
ADAPTER DEVICE SIPLACE S/F AT C HANGEOVER TABLE WITH WHEELS, FO R REEL HOLDER (ITEM NO:141204) OF 3X8MM FEEDERS (ITEM NO:14109 8,141099). |--| A1D00118101
|
Siemens
|
|
A1D00116078
|
THIS ITEM IS REQUIRED ONE TIME PER SIPLACE S OR F FOR EXTENDED SETUP VERIFICATION WITH CORDED SCANNER. THE FOLLOWING ITEMS A RE INCLUDED: CORDED SCANNER (1 PCS). |--| A1D00116078
|
Siemens
|
|
A1D00116110S02
|
SET PLACEMENT HEAD SEGMENTS SIP LACE VERSION II |--| A1D00116110S02
|
Siemens
|
|
A1D00118101-01
|
ADAPTER DEVICE SIPLACE S/F AT C HANGEOVER TABLE WITH WHEELS, FO R REEL HOLDER (ITEM NO:141204) OF 3X8MM FEEDERS (ITEM NO:14109 8,141099). |--| A1D00118101-01 |--| A1D0011810101
|
Siemens
|
|
A1D00116100
|
CUSTOMIZED PERFORMANCE SERVICES (/ DAY). SCOPE OF WORK AND DU RATION OF PERFORMANCE SERVICES PER AGREEMENT WITH CUSTOMER. C USTOMIZED SERVICES TO CONSIST O F EITHER CONSULTATIVE PROCESS A SSESSMENTS (E.G. ANALYSIS OF MA CHINE AND LINE PERFORMANCE, PRO CESS WORKFLOWS, PRODUCTION QUAL ITY, PERSONNEL TRAINING, SETUP- AND/OR CHANGEOVER STRATEGY, ETC .), OR ON-SITE SUPPORT DURING T HE IMPLEMENTATION / REALIZATION OF PRE-DEFINED IMPROVEMENT MEA SURES ON THE CUSTOMERS MANUFACT URING FLOOR. FOLLOW-UP CONSULTA TIONS TO ENSURE CONTINUOUS IMPR OVEMENT AND PROCESS OPTIMIZATIO N POSSIBLE. TRAVEL TIME AND EX PENSES ARE NOT INCLUDED AND WIL |--| A1D00116100
|
Siemens
|
|
A1D00118262-01
|
NOZZLE CHANGER FOR 6-SEGMENT CO LLECT AND PLACE HEAD OF THE SIP LACE S-27 HM. STATIONSSOFTWARE HIGHER THAN 502.XX LINESOFTWAR E HIGHER THAN 502.XX. OPTION CO NTAINS: 2 MAGAZINES FOR BIG NOZ ZLES AND 3 MAGAZINES FOR LITTLE NOZZLES. |--| A1D00118262-01 |--| A1D0011826201
|
Siemens
|
|
A1D00118262
|
NOZZLE CHANGER FOR 6-SEGMENT CO LLECT AND PLACE HEAD OF THE SI PLACE S-27 HM. STATIONSSOFTWARE HIGHER THAN 502.XX, LINESOFTWA RE HIGHER THAN 502.XX. OPTION C ONTAINS: 2 MAGAZINES FOR BIG NO ZZLES AND 3 MAGAZINES FOR LITTL E NOZZLES. |--| A1D00118262
|
Siemens
|
|
A1D00116134-01
|
THIS READER IS REQUIRED AS A RE TROFIT, IF ONE OR MORE READERS OF THIS TYPE ARE ALREADY INSTAL LED. WITH SINGLE LANE OPTION TH IS READER CAN BE INSTALLED ONCE OR TWICE, WITH DUAL LANE OPTIO N UP TO FOUR TIMES TO SCAN PCB BARCODE FROM TOP AND BOTTOM. |--| A1D00116134-01 |--| A1D0011613401
|
Siemens
|
|
A1D00118271
|
THIS ITEM IS REQUIRED ONE TIME PER CHANGEOVER TABLE. ONE SIPLA CE S/F CAN BE EQUIPPED WITH 2 TABLE CONTROLLERS (OPTION MTC D OES NOT FIT!). THE FOLLOWING IT EMS ARE INCLUDED: SPLICE DETECT ION TABLE CONTROLLER (1 PCS). |--| A1D00118271
|
Siemens
|
|
A1D00118261-03
|
NOZZLE CHANGER FOR 12-SEGMENT C OLLECT AND PLACE HEAD OF THE SI PLACE S-27 HM. TWO NOZZLE CHANG ERS ARE NEEDED, ONE PER HEAD. S TATIONSSOFTWARE HIGHER THAN 502 .XX, LINESOFTWARE HIGHER THAN 5 02.XX. OPTION CONTAINS 8 MAGAZI NES FOR 12 NOZZLES. |--| A1D00118261-03 |--| A1D0011826103
|
Siemens
|
|
A1D00116113
|
SET OF BALL SLEEVES FOR 12-SEGM ENT COLLECT AND PLACE HEAD. ADD ITIONAL SET FOR CHANGE OVER TO INCREASE MACHINE AVAILABILITY. |--| A1D00116113
|
Siemens
|
|
A1D00116114S01
|
SET NOZZLE SLEEVES (6) SIPLACE |--| A1D00116114S01
|
Siemens
|
|
A1D00118271S01
|
THIS ITEM IS REQUIRED ONE TIME PER CHANGEOVER TABLE. ONE SIPLA CE S/F CAN BE EQUIPPED WITH 2 TABLE CONTROLLERS (OPTION MTC D OES NOT FIT!). THE FOLLOWING IT EMS ARE INCLUDED: SPLICE DETECT ION TABLE CONTROLLER (1 PCS). |--| A1D00118271S01
|
Siemens
|
|
A1D00116134
|
THIS READER IS REQUIRED AS A RE TROFIT, IF ONE OR MORE READERS OF THIS TYPE ARE ALREADY INSTAL LED. WITH SINGLE LANE OPTION TH IS READER CAN BE INSTALLED ONCE OR TWICE, WITH DUAL LANE OPTIO N UP TO FOUR TIMES TO SCAN PCB BARCODE FROM TOP AND BOTTOM. |--| A1D00116134
|
Siemens
|
|
A1D00116114
|
SET OF BALL SLEEVES FOR 6-SEGME NT COLLECT AND PLACE HEAD. ADDI TIONAL SET FOR CHANGE OVER TO I NCREASE MACHINE AVAILABILITY. |--| A1D00116114
|
Siemens
|
|
A1D00118271-01
|
THIS ITEM IS REQUIRED ONE TIME PER CHANGEOVER TABLE. ONE SIPLA CE S/F CAN BE EQUIPPED WITH 2 TABLE CONTROLLERS (OPTION MTC D OES NOT FIT!). THE FOLLOWING IT EMS ARE INCLUDED: SPLICE DETECT ION TABLE CONTROLLER (1 PCS). |--| A1D00118271-01 |--| A1D0011827101
|
Siemens
|
|
A1D00118300
|
WITH THE OPTION RETROFIT VACUUM PUMP SIPLACE S-25 HM A SIPLACE S-25 HM CAN BE CONNECTED TO AN EXTERNAL VACUUMPUMP. THIS REDUC ES THE AIR CONSUMPTION TO 200 N I/MIN. TO GUARANTEE THE SPECIFI CATION OF SIPLACE S-25 HM THE V ACUUMPUMP MUST FULFILL THE SPEC IFICATION OF SIEMENS. MORE DETA ILS FROM THE RESPECTIVE SALES O R SERVICE REPRESENTATIVE. |--| A1D00118300
|
Siemens
|
|
A1D00116140-02
|
REGULATOR UNIT FOR LINEAR AND B ULK VIBRATOR FEEDERS FOR USE WI TH 142025 TYPE II. REQUIRED FOR USE WITH SIPLACE . 1 REGULATOR UNIT REQUIRED PER MODULE. |--| A1D00116140-02 |--| A1D0011614002
|
Siemens
|
|
A1D00118272
|
THIS ITEM IS REQUIRED ONE TIME PER SIPLACE S-27 HM, PER TABLE WITH MTC. THE FOLLOWING ITEMS A RE INCLUDED: SPLICE DETECTION T ABLE CONTROLLER (1 PCS). |--| A1D00118272
|
Siemens
|
|
A1D00118300-01
|
WITH THE OPTION RETROFIT VACUUM PUMP SIPLACE S-25 HM A SIPLACE S-25 HM CAN BE CONNECTED TO AN EXTERNAL VACUUMPUMP. THIS REDUC ES THE AIR CONSUMPTION TO 200 N I/MIN. TO GUARANTEE THE SPECIFI CATION OF SIPLACE S-25 HM THE V ACUUMPUMP MUST FULFIL THE SPECI FICATION OF SIEMENS. MORE DETAI LS FROM THE RESPECTIVE SALES OR SERVICE REPRESENTATIVE |--| A1D00118300-01 |--| A1D0011830001
|
Siemens
|
|
A1D00116161-03
|
NOZZLE CHANGER FOR 12-SEGMENT C OLLECT AND PLACE HEAD SIPLACE F5 HM.STATION SOFTWARE VERSION 402.XXX AND LATER. LINE SOFTWA RE VERSION 402.XXX AND LATER. O PTION INCLUDES: 7 MAGAZINES, EA CH FOR 12 NOZZLES. |--| A1D00116161-03 |--| A1D0011616103
|
Siemens
|
|
A1D00116162S02
|
NOZZLE CHANGER FOR 6 NOZZLE C+P HEAD SIPLACE 80 F4/F5 STATION SOFTWARE VERSION 403.XXX OR HIG HER LINE COMPUTER SOFTWARE 403. XXX OR HIGHER OPTION INCLUDES: 2 MAGAZINES FOR BIG NOZZLES 3 M AGAZINES FOR SMALL NOZZLES |--| A1D00116162S02
|
Siemens
|
|
A1D00118503
|
FIXED CONVEYOR RAIL RIGHT TO TR ANSPORT TWO PCBS. SYNCHRONOUS O R ASYNCHRONOUS TRANSPORT MODE. ITEM HAS TO BE ORDERED WITH THE PLACEMENT STATION. WITH THIS N EW TRANSPORT THE PCB IS CLAMPED TO TOP SIDE, THAT MEANS THE PL ACEMENT LEVEL IS ALWAYS ON THE SAME HEIGHT, INDEPENDENT FROM PCB-THICKNESS. THE NEW TRANSPOR T OFFERS SHORT PCB CHANGE TIME AND THE POSSIBILITY TO CHANGE E ASILY THE FIXED RAIL RIGHT - LE FT . PCB-FORMAT: L X W, STANDAR D: 50MM X 50MM TO 495MM X 216MM , EXTENDED DIMENSIONS WITH THE LONG BOARD OPTION: 50MM X 50MM TO 610MM X 216MM. |--| A1D00118503
|
Siemens
|
|
A1D00116161
|
NOZZLE CHANGER FOR 12-SEGMENT C OLLECT AND PLACE HEAD SIPLACE F 5 HM. STATION SOFTWARE VERSION 402.XXX AND LATER. LINE SOFTWAR E VERSION 402.XXX AND LATER. OP TION INCLUDES: 7 MAGAZINES, EAC H FOR 12 NOZZLES. |--| A1D00116161
|
Siemens
|
|
A1D00116162
|
NOZZLE CHANGER FOR 6-SEGMENT CO LLECT AND PLACE HEAD SIPLACE F5 HM STATION SOFTWARE VERSION V4 03.XX OR HIGHER. LINE COMPUTER SOFTWARE V403.XXX OR HIGHER. OP TION INCLUDES: 2 MAGAZINES FOR BIG NOZZLES, 3 MAGAZINES FOR SM ALL NOZZLES. |--| A1D00116162
|
Siemens
|
|
A1D00118405
|
LONG BOARD OPTION FOR SIPLACE S -27 HM: WITH THIS OPTION WE CAN HANDLE PCBS UP TO 610MM X 460 MM (24 INCH X 18 INCH ) IN THE SINGLE CONVEYOR MODE. THIS OPT ION CAN BE USED FOR SINGLE AND DUAL CONVEYOR SYSTEMS. |--| A1D00118405
|
Siemens
|
