ÃëàâíàÿÊàòàëîãsiemensA1DA1D5A1D50
 

A1D50

Àðòèêóë Íàèìåíîâàíèå Ïðîèçâîäèòåëü
A1D50141099-99 TAPE FEEDER 3X8MM 0201/0402 COM P. USED FOR SIPLACE HS-50 AND SIPLACE S-20/S-25 HM, SIPLACE F4/F5 HM IF MORE THAN TWO 3X8MM 0201/0402 FEEDERS PER HS-50 CH ANGE-OVER TABLE ARE IN OPERATIO N AN ADDITIONAL ADAPTER DEVICE PER COMPONENT TABLE IS REQUIRED (ITEM-NO. 119011) IF MORE THAN FOUR 3X8MM 0201/0402 FEEDERS P ER SIPLACE S-20/S-25 HM OR F4/F 5 HM CHANGE-OVER TABLE WITH WHE ELS ARE IN OPERATION AN ADDITIO NAL ADAPTER DEVICE PER COMPONEN T TABLE IS REQUIRED (ITEM-NO. 1 18101). IN COMBINATION WITH THE ABOVE MENTIONED ADAPTER DEVICE S A REEL HOLDER IS ALWAYS REQUI RED FOR TWO 3X8MM 0201/0402 FEE DERS (ITEM-NO. 141204). |--| A1D50141099-99 |--| A1D5014109999 Siemens
A1D50140000-99 USED: PLACEMENT STATION COMPLET E SIPLACE CF CONSIST OF THE FLE XIBLE PLACEMENT STATION SIPLACE CF, NOZZLE CHANGER FOR COLLEC T AND PLACE HEAD, NOZZLE CHANGE R FOR PICK AND PLACE HEAD, SMEM A-INTERFACE, CHANGEOVER TABLE A ND FEEDER PACKAGE THE PLACEMENT STATION SIPLACE CF HAS A MAXIM UM PLACEMENT RATE OF 9,000 COM PONENTS PER HOUR. FOR DETAILS S EE CURRENT VALID SCOPE OF SERVI CE AND DELIVERY. THE STATION PR OVIDES A COMPONENT CAPACITY OF MAXIMUM 118 X 8MM TAPES. THE MA CHINE IS EQUIPPED WITH ONE PICK AND PLACE HEAD AND 6-SEGMENT C OLLECT AND PLACE HEAD WITH INTE GRATED COMPONENT VISION. THE MA CHINE IS CAPABLE TO HANDLE A CO |--| A1D50140000-99 |--| A1D5014000099 Siemens
A1D50140300-99 USED: PLACEMENT STATION COMPLET E SIPLACE CF WITH WPC CONSIST O F THE FLEXIBLE PLACEMENT STATIO N SIPLACE CF, NOZZLE CHANGER FO R COLLECT AND PLACE HEAD,NOZZLE CHANGER FOR PICK AND PLACE HEA D, SMEMA-INTERFACE, CHANGEOVER TABLE, WAFFLE-PACK CHANGER AND FEEDER PACKAGE. THE PLACEMENT S TATION SIPLACE CF HAS A MAXIMUM PLACEMENT RATE OF 9,000 COMPO NENTS PER HOUR. FOR DETAILS SEE CURRENT VALID SCOPE OF SERVICE AND DELIVERY. THE STATION PROV IDES A COMPONENT CAPACITY OF MA XIMUM 88 X 8 MM TAPES. THE MACH INE IS EQUIPPED WITH ONE PICK A ND PLACE HEAD AND 6-SEGMENT COL LECT AND PLACE HEAD WITH INTEGR ATED COMPONENT VISION. THE MACH |--| A1D50140300-99 |--| A1D5014030099 Siemens
A1D50141097-05 USED FEEDER MODULE FOR 72MM S-T APE 4-80MM FEEDING PITCH WITH M OTORIZED DRIVE AND INTEGRATED C OVER FOIL REMOVAL FOR SIPLACE F 4/F5, 2,5 FEEDER LOCATIONS REQU IRED PER MODULE. SUBSTITUDE FOR 50141097-99 |--| A1D50141097-05 |--| A1D5014109705 Siemens
A1D50141092-05 USED FEEDER MODULE FOR 1 X 12MM OR 1 X 16MM TAPE (RECONFIGURAB LE), 4-24MM FEEDING PITCH WITH MOTORIZED DRIVE AND INTEGRATED COVER FOIL REMOVAL FOR SIPLACE, 1 FEEDER LOCATION REQUIRED PER MODULE. FROM SW VERSION 402.03 (S-20/F4). SUBSTITUDE FOR 5014 1092-95 |--| A1D50141092-05 |--| A1D5014109205 Siemens
A1D50140500-99 USED: PLACEMENT STATION COMPLET E SIPLACE CS CONSIST OF THE FLE XIBLE PLACEMENT STATION SIPLACE CS, TWO NOZZLE CHANGERS FOR C OLLECT AND PLACE HEADS, SMEMA-I NTERFACE, CHANGEOVER TABLES AND FEEDER PACKAGE THE PLACEMENT S TATION SIPLACE CS HAS A MAXIMUM PLACEMENT RATE OF 20,000 COMP ONENTS PER HOUR. FOR DETAILS SE E CURRENT VALID SCOPE OF SERVIC E AND DELIVERY. THE STATION PRO VIDES A COMPONENT CAPACITY OF M AXIMUM 118 X 8MM TAPES. THE MAC HINE IS EQUIPPED WITH TWO 6-SEG MENT COLLECT AND PLACE HEADS EA CH WITH INTEGRATED COMPONENT VI SION. THE MACHINE IS CAPABLE TO HANDLE A COMPONENT RANGE FROM 0.6MM X 0.3MM (0201) UP TO 18,7 |--| A1D50140500-99 |--| A1D5014050099 Siemens
A1D50141070-02 USED:TAPE FEEDER FOR 1 X 88MM S -TAPE, WITH ELECTRIC DRIVE AND COVER TAPE STORAGE BIN, 4MM/96M M FEED INCREMENTS, FOR SIPLACE F AND HF-SERIES. 3.5 FEEDER LOC ATIONS REQUIRED PER MODULE. |--| A1D50141070-02 |--| A1D5014107002 Siemens
A1D50141093-05 USED FEEDER MODULE FOR 1 X 24MM OR 1 X 32MM TAPE (RECONFIGURAB LE), 4-40MM FEEDING PITCH WITH MOTORIZED DRIVE AND INTE- GRATE D COVER FOIL REMOVAL FOR SIPLAC E, 1.5 FEEDER LOCATIONS REQUIRE D PER MODULE. FROM SW VERSION 4 02.03. SUBSTITUDE FOR 50141093- 95 |--| A1D50141093-05 |--| A1D5014109305 Siemens
A1D50141092-99 FEEDER MODULE FOR 12MM/16MM TAP E USED (RECONFIGURABLE), 4MM - 16MM FEEDING PITCH WITH MOTOR IZED DRIVE AND INTEGRATED COVER FOIL REMOVAL FOR SIPLACE, 1 FE EDER LOCATION REQUIRED PER MODU LE. FROM SW VERSION 402.03 ( S- 20/F4). |--| A1D50141092-99 |--| A1D5014109299 Siemens
A1D50141093-99 FEEDER MODULE FOR 24MM/32MM TAP E USED (RECONFIGURABLE), 4 - 32MM FEEDING PITCH WITH MOTORIZ ED DRIVE AND INTE- GRATED COVER FOIL REMOVAL FOR SIPLACE S15/2 0/F./F4 1 FEEDER LOCATIONS REQU IRED PER MODULE. FROM SW VERSIO N 402.03 OR 9.02 |--| A1D50141093-99 |--| A1D5014109399 Siemens
A1D50141094-99 FEEDER MODULE FOR 44MM TAPE US ED 4 - 44MM FEEDING PITCH WITH MOTORIZED DRIVE AND INTEGRATED COVER FOIL REMOVAL FOR SIPLACE F, 2 FEEDER LOCATIONS REQUIRED PER MODULE. FROM SW VERSION 40 2.03 OR 9.02. |--| A1D50141094-99 |--| A1D5014109499 Siemens
A1D50141094-05 USED FEEDER MODULE FOR 44MM TAP E 4-52MM FEEDING PITCH WITH MOT ORIZED DRIVE AND INTEGRATED COV ER FOIL REMOVAL FOR SIPLACE F, 2 FEEDER LOCATIONS REQUIRED PER MODULE. FROM SW VERSION 402.03 OR 9.02. SUBSTITUDE FOR 501410 94-99 |--| A1D50141094-05 |--| A1D5014109405 Siemens
A1D50141095-05 USED FEEDER MODULE FOR 56MM TAP E 4-68MM FEEDING PITCH WITH MOT ORIZED DRIVE AND INTEGRATED COV ER FOIL REMOVAL FOR SIPLACE F, 2,5 FEEDER LOCATIONS REQUIRED P ER MODULE. FROM SW VERSION 402. 03 OR 9.02. SUSTITUDE FOR 50141 095-99 |--| A1D50141095-05 |--| A1D5014109505 Siemens
A1D50141095-99 FEEDER MODULE FOR 56MM TAPE US ED 4 - 56MM FEEDING PITCH WITH MOTORIZED DRIVE AND INTEGRATED COVER FOIL REMOVAL FOR SIPLACE F, 2,5 FEEDER LOCATIONS REQUIR ED PER MODULE. FROM SW VERSION 402.03 OR 9.02. |--| A1D50141095-99 |--| A1D5014109599 Siemens
A1D50174000-99 EXTENSION OF THE PARTS WARRANTY BY 6 MONTHS.THE WARRANTY CONDI TIONS ARE THE SAME AS STATED IN THE ORDER CONFIRMATION FOR THE PRE-OWNED EQUIPMENT. THIS IS S OLELY AN EXTENSION OF THE PERIO D OF TIME IN WHICH THE EQUIPMEN T IS COVERED UNDER WARRANTY. -P RICE UPON INQUIRY- |--| A1D50174000-99 |--| A1D5017400099 Siemens
A1D50172059-99 TRANSPORT HEIGHT CHANGES INCLUD ES ALSO TABLES HEIGHT CHANGES. |--| A1D50172059-99 |--| A1D5017205999 Siemens
A1D50141096-04 USED FEEDER MODULE SII FOR 2X8M M 2MM AND 4MM PITCH, TAPES WITH MOTORISED DRIVE AND COVER-FOIL STORAGE USE WITH: SIPLACE S-15 /S-20/S-25/HS-50/F/F4, 1 FEEDER LOCATION REQUIRED PER MODULE. SUBSTITUDE FOR 50141096-94 |--| A1D50141096-04 |--| A1D5014109604 Siemens
A1D50141097-99 FEEDER MODULE FOR 72MM S-TAPE USED 4 - 56MM FEEDING PITCH WI TH MOTORIZED DRIVE AND INTEGRAT ED COVER FOIL REMOVAL FOR SIPLA CE F4/F5, 2,5 FEEDER LOCATIONS REQUIRED PER MODULE. |--| A1D50141097-99 |--| A1D5014109799 Siemens
A1D50142031-04 USED: FEEDER MODULE FOR COMPONE NTS IN STICK MAGAZINES, MAGAZIN E WIDTH 4.5MM, 9.5MM, 15MM AND 30MM. ELECTRICALLY DRIVEN WITH CONTROL ELECTRONICS FOR SIPLACE S/F AND HF-SERIES. USE ONLY WI TH FEEDER CHANGEOVER TABLE SOFT WARE VERSION 003.005 (ITEM NO. 0032871). |--| A1D50142031-04 |--| A1D5014203104 Siemens
A1D50172103-99 IMPLEMENTATION OF A TEST RUN BY USING A TEST PCB TO DETERMINE AND DOCUMENT THE ACCURACY OR TH EIR DEVIATION ACCORDING SPECIFI CATION OF THE MACHINE BEFORE ST ARTING CONVERTION. DISMANTLE AN D REINTEGRATION OF COMPLETE SIN GLE/DUAL CONVEYOR SYSTEM INCLUD ING ALL NECESSARY MECHANICAL AN D ELECTRICAL ADAPTIONS. SET UP AND CALIBRATION ACCORDING SCOPE OF SERVICE AND DELIVERY FOR SI PLACE PLACEMENT SYSTEMS. THE CO NVERSION CAN ONLY BE IMPLEMENTE D WITH SIEMENS IN BRUCHSAL. THE PRICE INCLUDES ALL COSTS FOR S PARES AND LABOURS TO COVERT ONL Y THE TRANSPORT SYSTEM. IN CASE OF EXPOSE ANY UNFORESEEN DEFEC TS WHICH INFLUENCE THE GENERAL |--| A1D50172103-99 |--| A1D5017210399 Siemens
A1D50141098-99 TAPE FEEDER 3X8MM USED FOR SI PLACE HS-50, S-15/20/25, SIPLAC E F4/F5HM. IF MORE THAN TWO 3X8 MM FEEDER PER HS-50 TABLE ARE I N OPERATION AN ADDITIONAL ADAPT ER DEVICE PER COMPONENT TABLE I S REQUIRED (ITEM-NO.119011). IF MORE THAN FOUR 3X8MM FEEDER PE R S-15/20/25 OR F4/F5HM TABLE A RE IN OPERATION AN ADDITIONAL A DAPTER DEVICE PER COMPONENT TAB LE IS REQUIRED (ITEM-NO.118101) . IN COMBINATION WITH THE ADAPT ER DEVICE A REEL HOLDER FOR ALW AYS TWO 3X8MM FEEDER IS REQUIRE D (ITEM-NO.141204). |--| A1D50141098-99 |--| A1D5014109899 Siemens
A1D50174001-99 EXTENSION OF THE PARTS WARRANTY BY 12 MONTHS.THE WARRANTY COND ITIONS ARE THE SAME AS STATED I N THE ORDER CONFIRMATION FOR TH E PRE-OWNED EQUIPMENT. THIS IS SOLELY AN EXTENSION OF THE PERI OD OF TIME IN WHICH THE EQUIPME NT IS COVERED UNDER WARRANTY. - PRICE UPON INQUIRY- |--| A1D50174001-99 |--| A1D5017400199 Siemens
A1D50174002-99 EXTENSION OF THE PARTS WARRANTY BY 18 MONTHS.THE WARRANTY COND ITIONS ARE THE SAME AS STATED I N THE ORDER CONFIRMATION FOR TH E PRE-OWNED EQUIPMENT. THIS IS SOLELY AN EXTENSION OF THE PERI OD OF TIME IN WHICH THE EQUIPME NT IS COVERED UNDER WARRANTY. - PRICE UPON INQUIRY- |--| A1D50174002-99 |--| A1D5017400299 Siemens
A1D50116022-99 USED COMPONENT FEEDER CHANGEOVE R TABLE WITH INTEGRATED REEL CO NTAINER FOR SIPLACE. INSTALLATI ON ON RIGHTHAND SIDE RELATED TO DIRECTION OF PCB TRANSPORT. CO MPONENT FEEDER CAPACITY 1 X 40 8 MM TAPES. REQUESTED ONLY FOR THE FIRST INSTALLATION OF A COM PONENT FEEDER CHANGEOVER TABLE PER SIPLACE F STATION, WITHOUT ACCESSORY. |--| A1D50116022-99 |--| A1D5011602299 Siemens
A1D50172109-99 THE PERFORMANCE/ACCEPTANCE PACK AGE INCLUDE THE FOLLOWING STEPS : CHECK OF MECHANICAL COMPONENT ES CHECK OF WIRING AND CABLES R EPLACEMENT OF ALL DEFECTIVE PAR TS AND COMPONENTS FULL COMMISSI ONING AND CALIBRATION VDE TESTI NG MASCHINE CAPABILITY TEST (MC T) CONTINUOUS RUN FULL SAFETY C HECK DOCUMENTATION OF ALL TESTI NG STEPS SYSTEM ACCEPTANCE TEST ACCORDING SCOPE OF SERVICE AND DELIVERY FOR SIPLACE PLACEMENT SYSTEMS |--| A1D50172109-99 |--| A1D5017210999 Siemens
A1D50172102-99 IMPLEMENTATION OF A TEST RUN BY USING A TEST PCB TO DETERMINE AND DOCUMENT THE ACCURACY OR TH EIR DEVIATION ACCORDING SPECIFI CATION OF THE MACHINE BEFORE ST ARTING CONVERTION. DISMANTLE AN D REINTEGRATION OF COMPLETE SIN GLE/DUAL CONVEYOR SYSTEM INCLUD ING ALL NECESSARY MECHANICAL AN D ELECTRICAL ADAPTIONS. SET UP AND CALIBRATION ACCORDING SCOPE OF SERVICE AND DELIVERY FOR SI PLACE PLACEMENT SYSTEMS. THE CO NVERSION CAN ONLY BE IMPLEMENTE D WITH SIEMENS IN BRUCHSAL. THE PRICE INCLUDES ALL COSTS FOR S PARES AND LABOURS TO COVERT ONL Y THE TRANSPORT SYSTEM. IN CASE OF EXPOSE ANY UNFORESEEN DEFEC TS WHICH INFLUENCE THE GENERAL |--| A1D50172102-99 |--| A1D5017210299 Siemens
A1D50116226-99 USED COMPONENT CHANGEOVER TABLE , MOBILE 830-950MM FOR SIPLACE F/F4/F5/S-20/S-23HM/S-25HM AND S-27HM MACHINES. BOTH SIDES OF THE MACHINE WITH INTEGRATED LIF TING DEVICE AND INTEGRATED REEL CONTAINER FOR MINIMIZATION OF SETUP TIMES. FEEDER CAPACITY 59 X 8MM TAPES, VERSION 230V/110V . INSTALLATIONS ON SIPLACE 80 S -15/20 AND SIPLACE 80 F/F4 MACH INES REQUEST ADDITIONAL ITEM NO 00345097-01. IN ORDER TO AVOID HEAD CRASH, CAUSED BY NON CORR ECTLY FIXED COMPONENT FEEDERS, IT IS RECOMMENDET TO USE THE IT EM NO 116225 (FEEDER FASTENING ATTACHEMENT). |--| A1D50116226-99 |--| A1D5011622699 Siemens
A1D50116113-99 USED SET OF BALL SLEEVES FOR 12 -SEGMENT COLLECT AND PLACE HEAD . ADDITIONAL SET FOR CHANGE OVE R TO INCREASE MACHINE AVAILABIL ITY. |--| A1D50116113-99 |--| A1D5011611399 Siemens
A1D50174003-99 EXTENSION OF THE FULL WARRANTY BY 6 MONTHS. THE WARRANTY CONDI TIONS ARE THE SAME AS STATED IN THE ORDER CONFIRMATION FOR THE PRE-OWNED EQUIPMENT. THIS IS S OLELY AN EXTENSION OF THE PERIO D OF TIME IN WICH THE EQUIPMENT IS COVERED UNDER WARRANTY. -P RICE UPON INQUIRY- |--| A1D50174003-99 |--| A1D5017400399 Siemens
A1D50116114-99 USED SET OF BALL SLEEVES FOR 6- SEGMENT COLLECT AND PLACE HEAD. ADDITIONAL SET FOR CHANGE OVER TO INCREASE MACHINE AVAILABILI TY. |--| A1D50116114-99 |--| A1D5011611499 Siemens
A1D50116438-99 USED MATRIX TRAY CHANGER 2 FOR SIPLACE HF-SERIES PLACEMENT STA TION, CONSISTING OF TWO INDEPEN DENTLY DRIVEN TOWERS.(HF CAN BE DOCKED IN LOCATIONS 2 AND/OR 4 , HF/3 CAN BE DOCKED ONLY IN LO CATION 2). MAXIMUM TRAY SIZE: 2 40MM X 340MM. MAXIMUM PERMISSIB LE HEIGHT OF THE WAFFLE PACK TR AY INCLUDING THE COMPONENT: 31. 5MM. THE MTC2 CAN BE ADAPTED TO MACHINE HEIGHTS OF 830-950MM. POWER SUPPLY: 3 X 200V-400V / 5 0-60 HZ. -PRICE UPON INQUIRY- |--| A1D50116438-99 |--| A1D5011643899 Siemens
A1D50119700-99 USED: 2 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 60.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMERS REQUI REMENTS SIPLACE X2 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT AND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT AND PLACE (ITEM N O: 119731) 6-SEGMENT COLLECT AN D PLACE HEAD (ITEM NO: 119730) OR A TWIN HEAD (ITEM NO. 119733 ) EACH HEAD INCLUDES A COMPONEN T CAMERA. THE HEADS SHOULD BE O RDERED SEPARATELY WITH THE PLAC EMENT STATION, ONE HEAD MUST BE ORDERED FOR EACH GANTRY OF THE |--| A1D50119700-99 |--| A1D5011970099 Siemens
A1D50116334-99 USED LINE COMPUTER FOR SIPLACE G2/S-15/20/F/F4/F5HM/S-25HM,S-2 7HM/HS-50/HS-60 WITH TABLE,WITH SOFTWARE FOR COMMUNICATIONS WI TH STATION AND SUPERVISOR COMPU TERS. OPERATING SYSTEM LINUX. O PERATING VOLTAGE ADJUSTABLE TO 220-240V/50HZ OR 110-120V/50-60 HZ. |--| A1D50116334-99 |--| A1D5011633499 Siemens
A1D50116428-99 USED WAFFLE-PACK CHANGER FOR SI PLACE F4/F5HM COMBINED WITH FIX ED COMPONENT TABLE FOR TRANSPOR T HEIGHT 830MM-950MM. VERSION F OR 230/110V. STORAGE CAPACITY O F 28 WAFFLE PACK TRAYS, MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2,5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE-PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. -PRICE UPO N INQUIRY- |--| A1D50116428-99 |--| A1D5011642899 Siemens
A1D50119400-99 USED: SMD PLACEMENT STATION WIT H A MAXIMUM PLACEMENT RATE OF 6 0,000 COMP./H. FOR DETAILS SEE THE CURRENT SCOPE OF SERVICE AN D DELIVERY. THE MACHINE FEATURE S A COMPONENT FEEDER CAPACITY O F 144 X 8MM TAPES. FOUR 12-SEGM ENT COLLECT AND PLACE HEADS WIT H INTEGRATED COMPONENT VISION S YSTEM ARE CAPABLE TO HANDLE A C OMPONENT RANGE FROM 0201 UP TO 18,7MM X 18,7MM. FOR THE PLACEM ENT OF 0201 COMPONENTS THE 0201 PACKAGE PHASE 2 (ITEM NO. 1180 20) AND THE COMPONENT SENSOR (I TEM NO.118021) ARE RECOMMENDED. THE MACHINE WITH THE SINGLE CO NVEYOR IS ABLE TO HANDLE PCBS F ROM 50MM X 50MM (2 INCH X 2 INC H) TO 368MM X 460MM (18 INCH X |--| A1D50119400-99 |--| A1D5011940099 Siemens
A1D50119622-99 USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE HF-SERIES.COMPONENT FE EDER CAPACITY: 15 SLOTS. WITH W HEELS FOR MINIMIZATION OF SETUP TIMES. |--| A1D50119622-99 |--| A1D5011962299 Siemens
A1D50119780-99 USED: 4 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 80.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMER REQUIR EMENTS, SIPLACE X4 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT AND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT AND PLACE (ITEM N O: 119731) OR 6-SEGMENT COLLECT AND PLACE HEADS (ITEM NO:11973 0) EACH HEAD INCLUDES A COMPONE NT CAMERA. THE HEADS SHOULD BE ORDERED SEPARATELY WITH THE PLA CEMENT STATION, ONE HEAD MUST B E ORDERED FOR EACH GANTRY OF TH E PLACEMENT STATION. THE FOLLOW |--| A1D50119780-99 |--| A1D5011978099 Siemens
A1D50119650-99 USED: SMD PLACEMENT STATION FOR END-OF-LINE/HIGH-END COMPONENT S WITH A MAXIMUM PLACEMENT RATE OF 40,800 CPH (IN ACCORDANCE W ITH SCOPE OF SERVICE AND DELIVE RY). THE PLACEMENT STATION PROV IDES A FEEDER CAPACITY OF MAXIM UM 180 X 8MM TAPES. THE PLACEME NT STATION IS EQUIPPED WITH 12- SEGMENT COLLECT AND PLACE HEADS , 6-SEGMENT COLLECT AND PLACE H EADS OR TWIN HEAD. THE FOLLOWIN G HEAD CONFIGURATIONS ARE INCLU DED AS STANDARD SCOPE OF DELIVE RY: PLACEMENT AREA 1: GANTRY 1: 12-SEGMENT COLLECT AND PLACE H EAD (ART. NR.119616). GANTRY 4: 12-SEGMENT COLLECT AND PLACE H EAD (ART. NR.119616). PLACEMENT AREA 2: GANTRY 3: TWIN HEAD (A |--| A1D50119650-99 |--| A1D5011965099 Siemens
A1D50117004-99 USED: SMD PLACEMENT STATION SIP LACE F4. ATTENTION: MACHINE HAS BEEN REBUILT FROM S-20 TO F4. THERE ARE NO TECHNICAL RESTRICT ION REFERING QUALITY AND UTILIT Y. IN CASE OF SPARE PART ORDER, THERE HAS TO BE AN REMARK OF R EBUILT. 12-SEGMENT COLLECT AND PLACE HEAD, BENCHMARK PLACEMEN T RATE: 10.000 CP/HR COMPONENT FEEDER CAPACITY: 2X40 8MM TAPES , PLACEMENT HEADS: 1 PICK AND P LACE HEAD WITH COMPONENT VISION SYSTEM AND 1 12-SEGMENT COLLEC T AND PLACE HEAD WITH OPTICAL COMPONENT RECOGNITION SYSTEM, C OMPONENT SIZE: 0402 TO 55X55MM, PCBOARD SIZE: 50X50MM TO 460X4 60MM, INCLUDING: 1 COMPONENT CH ANGEOVER TABLE ON LEFTHAND SIDE |--| A1D50117004-99 |--| A1D5011700499 Siemens
A1D50119722-99 USED:COMPONENT FEEDER CHANGEOVE R TABLE WITH 40 X-FEEDER SLOTS FOR SIPLACE X-SERIES MACHINES, 830MM-950MM WITH INTEGRATED REE L CONTAINER AND WHEELS FOR MINI MIZATION OF SETUP TIMES. |--| A1D50119722-99 |--| A1D5011972299 Siemens
A1D50119750-99 USED: 3 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 60.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMER REQUIR EMENTS, SIPLACE X3 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT UND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT UND PLACE (ITEM N O: 119731) 6-SEGMENT COLLECT UN D PLACE HEADS (ITEM NO:119730) OR A TWIN HEAD (ITEM NO: 119733 ), EACH HEAD INCLUDES A COMPONE NT CAMERA. THE HEADS SHOULD BE ORDERED SEPARATELY WITH THE PLA CEMENT STATION, ONE HEAD MUST B E ORDERED FOR EACH GANTRY OF TH |--| A1D50119750-99 |--| A1D5011975099 Siemens
A1D50118500-99 USED: SMD PLACEMENT MACHINE WIT H TWO GANTRIES FOR HIGH-SPEED A PPLICATIONS WITH A MAXIMUM PLAC EMENT RATE OF 26,500 COMPONENTS PER HOUR. FOR DETAILS SEE CURR ENT VALID SCOPE OF SERVICE AND DELIVERY. THE STATION PROVIDES A COMPONENT FEEDER CAPACITY OF MAXIMUM 118 X 8MM TAPES. EACH O F THE TWO GANTRIES OF THE MACHI NE CAN BE EQUIPPED WITH A 12-SE GMENT COLLECT AND PLACE HEAD OR A 6-SEGMENT COLLECT AND PLACE HEAD BOTH WITH INTEGRATED COMPO NENT VISION. IN ADDITION THE HE ADS CAN BE EXCHANGED LATER IN T HE FIELD. FOR THIS THE ORDER OF THE RESPECTIVE HEAD RE-CONFIGU RATION KIT IS NECESSARY. BY ORD ER OF THE MACHINE AN ADDITIONAL |--| A1D50118500-99 |--| A1D5011850099 Siemens
A1D50116900-99 USED: SMD PLACEMENT STATION SIP LACE S-20.CONSISTING OF: PLACEM ENT PERFORMANCE 20.000 COMPONEN TS PER HOUR SEE SPECIFICATION E DITION 5.0. MAX. COMPONENT FEED ER CAPACITY 2 X 40 8MM TAPES, 2 COLLECT AND PLADE HEADS WITH 1 2 NOZZLES EACH,RANGE FROM 0402 TO 14 X 18, PCB SIZE 50X50MM TO 460X460MM 2 COMPONENT CHANGEOV ER TABLES FOR LEFT/RIGHTHAND SI DE, 2 AUTOM. EMPTY TYPE CUTTERS , PCB VISION SYSTEM, 1 STATION COMPUTER WITH COLOUR MONITOR. - PRICE UPON INQUIRY- PERFORMANC E/ACCEPTANCE PACKAGE FOR OVERHA ULING MACHINES: CHECK OF MECHAN ICAL COMPONENTES CHECK OF WIRIN G AND CABLES REPLACEMENT OF ALL DEFECTIVE PARTS AND COMPONENTS |--| A1D50116900-99 |--| A1D5011690099 Siemens
A1D50119821-99 USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE D4.COMPONENT FEEDER CA PACITY (TYP S): 12 SLOTS. WITH WHEELS FOR MINIMIZATION OF SETU P TIMES. |--| A1D50119821-99 |--| A1D5011982199 Siemens
A1D50119800-99 USED: SMD PLACEMENT STATION SIP LACE D1 FOR END-OF-LINE/HIGH-EN D COMPONENTS WITH A MAXIMUM PLA CEMENT RATE OF 15,000 COMPONENT S PER HOUR. FOR DETAILS SEE CUR RENT VALID SCOPE OF SERVICE AND DELIVERY. THE PLACEMENT STATIO N PROVIDES A COMPONENT FEEDING CAPACITY OF MAXIMUM 90 X 8MM TA PES. THE PLACEMENT STATION CAN BE CONFIGURATED WITH ONE PICK A ND PLACE HEAD AND ALTERNATIVE W ITH A 12-SEGMENT COLLECT AND PL ACE HEAD OR A 6-SEGMENT COLLECT AND PLACE HEAD WITH INTEGRATED COMPONENT VISION. ADDITIONAL T O THAT, THE SIPLACE D1 CAN BE E QUIPPED ONLY WITH ONE PLACEMENT HEAD: D1 (6), D1 (12), D1 (PP) . DEPENDING ON THE HEAD CONFIGU |--| A1D50119800-99 |--| A1D5011980099 Siemens
A1D50117003-99 USED: SMD PLACEMENT STATION SIP LACE F4. ATTENTION: MACHINE HAS BEEN REBUILT FROM F5 TO F4. TH ERE ARE NO TECHNICAL RESTRICTIO N REFERING QUALITY AND UTILITY. IN CASE OF SPARE PART ORDER, T HERE HAS TO BE AN REMARK OF REB UILT. 12-SEGMENT COLLECT AND PL ACE HEAD, BENCHMARK PLACEMENT RATE: 10.000 CP/HR COMPONENT FE EDER CAPACITY: 2X40 8MM TAPES, PLACEMENT HEADS: 1 PICK AND PLA CE HEAD WITH COMPONENT VISION SYSTEM AND 1 12-SEGMENT COLLECT AND PLACE HEAD WITH OPTICAL CO MPONENT RECOGNITION SYSTEM, COM PONENT SIZE: 0402 TO 55X55MM, P CBOARD SIZE: 50X50MM TO 460X460 MM, INCLUDING: 1 COMPONENT CHAN GEOVER TABLE ON LEFTHAND SIDE, |--| A1D50117003-99 |--| A1D5011700399 Siemens
A1D50117250-99 USED: SMD PLACEMENT STATION SIP LACE F5. MAXIMUM PLACEMENT RATE 8,000 COMP./H. COMPONENT FEEDE R CAPACITY: 2 X 40 8 MM TAPES. 1 X 6-SEGMENT COLLECT AND PLACE HEAD WITH COMPONENT VISION. CO MPONENT RANGE FROM 0603 TO 32 M M X 32 MM. 1 X PICK AND PLACE H EAD WITH COMPONENT VISION. COMP ONENT RANGE UP TO 55 MM X 55 MM . ACCESSORIES: 1 COMPONENT FEED ER CHANGEOVER TABLE - LEFTHAND SIDE, 2 TAPE CUTTERS, STATION C OMPUTER WITH MONITOR. -PRICE UP ON INQUIRY- PERFORMANCE/ACCEPT ANCE PACKAGE FOR OVERHAULING MA CHINES: CHECK OF MECHANICAL COM PONENTES CHECK OF WIRING AND CA BLES REPLACEMENT OF ALL DEFECTI VE PARTS AND COMPONENTS OVERHAU |--| A1D50117250-99 |--| A1D5011725099 Siemens
A1D50118250-99 USED: PLACEMENT MACHINE SIPLACE S-25 HM. MATRIX TRAY CHANGER C OMPETENT. SMD PLACEMENT MACHINE WITH TWO GANTRIES FOR HIGH-SPE ED APPLICATIONS WITH A MAXIMUM PLACEMENT RATE OF 25.000 COMPON ENTS PER HOUR. FOR DETAILS SEE CURRENT VALID SCOPE OF SERVICE AND DELIVERY. THE STATION PROVI DES A COMPONENT FEEDER CAPACITY OF MAXIMUM 118 X 8MM TAPES. A MATRIX TRAY CHANGER SUITABLE FO R BOTH SIDES OF THE MACHINE IS AVAILABLE. THE MTC CAN BE EQUIP PED WITH UP TO 80 TRAYS. THE TR AYS CAN BE REFILLED WHILE THE M ACHINE IS RUNNING.ONE CHANGEOVE R TABLE OR MTC FOR EACH SIDE IS MANDATORY. -PRICE UPON INQUIRY - PERFORMANCE/ACCEPTANCE PACKA |--| A1D50118250-99 |--| A1D5011825099 Siemens
A1D50119850-99 USED: SMD PLACEMENT STATION SIP LACE D2 WITH TWO GANTRIES FOR H IGH-SPEED APPLICATIONS WITH A M AXIMUM PLACEMENT RATE OF 31,000 COMPONENTS PER HOUR. FOR DETAI LS SEE CURRENT VALID SCOPE OF S ERVICE AND DELIVERY. THE PLACEM ENT STATION PROVIDES A COMPONEN T FEEDER CAPACITY OF MAXIMUM 90 X 8MM TAPES. EACH OF THE TWO G ANTRIES OF THE PLACEMENT STATIO N MUST BE CONFIGURATED WITH A 1 2-SEGMENT COLLECT AND PLACE HEA D OR A 6-SEGMENT COLLECT AND PL ACE HEAD, BOTH WITH INTEGRATED COMPONENT VISION. IN ADDITION T HE HEADS CAN BE EXCHANGED LATER IN THE FIELD. FOR THIS THE ORD ER OF THE RESPECTIVE HEAD RECON FIGURATION KIT IS NECESSARY. BY |--| A1D50119850-99 |--| A1D5011985099 Siemens
A1D50172108-99 THE PERFORMANCE/ACCEPTANCE PACK AGE INCLUDE THE FOLLOWING STEPS : CHECK OF MECHANICAL COMPONENT ES CHECK OF WIRING AND CABLES R EPLACEMENT OF ALL DEFECTIVE PAR TS AND COMPONENTS FULL COMMISSI ONING AND CALIBRATION VDE TESTI NG MASCHINE CAPABILITY TEST (MC T) CONTINUOUS RUN FULL SAFETY C HECK DOCUMENTATION OF ALL TESTI NG STEPS SYSTEM ACCEPTANCE TEST ACCORDING SCOPE OF SERVICE AND DELIVERY FOR SIPLACE PLACEMENT SYSTEMS |--| A1D50172108-99 |--| A1D5017210899 Siemens
A1D50119880-99 USED : HIGHSPEED SMD PLACEMENT STATION SIPLACE D4 WITH A MAXIM UM PLACEMENT RATE OF 66,000 COM PONENTS PER HOUR. FOR DETAILS S EE THE CURRENT SCOPE OF SERVICE AND DELIVERY. THE PLACEMENT ST ATION PROVIDES A FEEDER CAPACIT Y OF MAXIMUM 144 X 8MM TAPES. T HE PLACEMENT STATION HAS TO BE EQUIPPED WITH FOUR 12-SEGMENT C OLLECT UND PLACE HEADS WITH INT EGRATED COMPONENT VISION SYSTEM . THE HEADS (ITEM NO: 119876) S HOULD BE ORDERED SEPARATELY WIT H THE PLACEMENT STATION. SIPLAC E D4 IS CAPABLE TO HANDLE A COM PONENT RANGE STARTING WITH 0.6M M X 0.3MM UP TO 18.7MM X 18.7MM . OPTIONAL 01005 PACKAGE (ITEM- NO.:119920). THE PLACEMENT STAT |--| A1D50119880-99 |--| A1D5011988099 Siemens
A1D50119870-99 USED: MULTIFUNCTIONAL SMD PLACE MENT STATION WITH A MAXIMUM PLA CEMENT RATE OF 40,400 CPH (IN A CCORDANCE WITH SCOPE OF SERVICE AND DELIVERY). THE PLACEMENT S TATION PROVIDES A FEEDER CAPACI TY OF MAXIMUM 180 X 8MM TAPES. DEPENDING ON CUSTOMER REQUIREME NTS, SIPLACE D3 CAN BE EQUIPPED WITH 12-SEGMENT COLLECT UND PL ACE HEADS (ITEM NO: 119876) 6-S EGMENT COLLECT UND PLACE HEADS (ITEM NO: 119875) OR A TWIN HEA D (ITEM NO: 119877), EACH HEAD INCLUDES A COMPONENT CAMERA. TH E HEADS SHOULD BE ORDERED SEPAR ATELY WITH THE PLACEMENT STATIO N, ONE HEAD MUST BE ORDERED FOR EACH GANTRY OF THE PLACEMENT S TATION. THE FOLLOWING HEAD COMB |--| A1D50119870-99 |--| A1D5011987099 Siemens
A1D50119825-99 USED WAFFLE-PACK CHANGER FOR SI PLACE D1 COMBINED WITH FIXED CO MPONENT TABLE FOR TRANSPORT HEI GHT 830/900/930/950MM.STORAGE C APACITY OF 28 WTC (WAFFLE PACK TRAY CARRIER), MAX. SIZE OF WAF FLE PACK TRAY 341MM X 235MM X 1 5MM. TRAY CHANGEOVER TIME: 1.9S (OVER 1 LEVEL). 10 FEEDER LOCA TIONS REQUIRED FOR WAFFLE-PACK CHANGER. SUPPLY VOLTAGES: 3-204 /230V, 3- 380/400/415V. -PRICE UPON INQUIRY- |--| A1D50119825-99 |--| A1D5011982599 Siemens
A1D50118020-99 USED PACKAGE FOR OPTIMISED PLAC EMENT OF 0201 COMPONENTS (SIZE 0.6 X 0.3MM) REGARDING DPM RATE AND PICK UP RATE. SUITABLE FOR ALL SIPLACE S-27 HM, HS-XX AND HF-SERIES. THE PACKAGE INCLUDE S: HIGH RESOLUTION DCA-CAMERA, 24 X NOZZLE TYPE 906 OVAL TIP, 0201 HANDBOOK. THE COMPONENT SP ECTRUM FORTHE DCA-CAMERA IS 020 1 UP TO 13MM X 13MM. WHEN USING THE NOZZLE TYPE 906THE USE OF THE COMPONENT SENSOR IS MANDATO RY (ITEM NUMBER: 118021). THE C OMPONENT SENSOR CAN ONLY BE USE D AT A 12-SEGMENT COLLECT AND P LACE HEADAND REQUIRES THE MODUL AR HEAD BOARD. ONE 0201 PACKAGE AND ONE COMPONENT SENSOR PER H EAD IS REQUIRED. IN ADDITION TH |--| A1D50118020-99 |--| A1D5011802099 Siemens
A1D50158882-99 TOTAL PACKING COSTS (CHARGED AC CORDING TO ACTUAL OUTLAY) |--| A1D50158882-99 |--| A1D5015888299 Siemens
A1D50174005-99 EXTENSION OF THE FULL WARRANTY BY 18 MONTH. THE WARRANTY CONDI TIONS ARE THE SAME AS STATED IN THE ORDER CONFIRMATION FOR THE PRE-OWNED EQUIPMENT. THIS IS S OLELY AN EXTENSION OF THE PERIO D OF TIME IN WHICH THE EQUIPMEN T IS COVERED UNDER WARRANTY. -P RICE UPON INQUIRY- |--| A1D50174005-99 |--| A1D5017400599 Siemens
A1D50172106-99 THE PERFORMANCE/ACCEPTANCE PACK AGE INCLUDE THE FOLLOWING STEPS : CHECK OF MECHANICAL COMPONENT ES CHECK OF WIRING AND CABLES R EPLACEMENT OF ALL DEFECTIVE PAR TS AND COMPONENTS OVERHAUL OF P LACEMENT HEADS FULL COMMISSIONI NG CONTINUOUS OPERATION WITHOUT PLACEMENT COMPLETE MACHINE CAL IBRATION VDE TESTING MACHINE CA PABILITY TEST (MCT) 4 HOUR PROD UCTION RUN FULL SAFETY CHECK DO CUMENTATION OF ALL TESTING STEP S SYSTEM ACCEPTANCE TEST ACCORD ING SCOPE OF SERVICE AND DELIVE RY FOR SIPLACE PLACEMENT SYSTEM S |--| A1D50172106-99 |--| A1D5017210699 Siemens
A1D50142031-99 USED: FEEDER MODULE FOR COMPONE NTS IN STICK MAGAZINES, MAGAZIN E WIDTH 4.5MM, 9.5MM, 15MM AND 30MM. ELECTRICALLY DRIVEN WITH CONTROL ELECTRONICS FOR SIPLACE S/F AND HF-SERIES. USE ONLY WI TH FEEDER CHANGEOVER TABLE SOFT WARE VERSION 003.005 (ITEM NO. 00328713-05). |--| A1D50142031-99 |--| A1D5014203199 Siemens
A1D50158881-99 TOTAL FREIGHT COSTS (CHARGED AC CORDING TO ACTUAL OUTLAY) |--| A1D50158881-99 |--| A1D5015888199 Siemens
A1D50172107-99 THE PERFORMANCE/ACCEPTANCE PACK AGE INCLUDE THE FOLLOWING STEPS : CHECK OF MECHANICAL COMPONENT ES CHECK OF WIRING AND CABLES R EPLACEMENT OF ALL DEFECTIVE PAR TS AND COMPONENTS OVERHAUL OF P LACEMENT HEADS FULL COMMISSIONI NG CONTINUOUS OPERATION WITHOUT PLACEMENT COMPLETE MACHINE CAL IBRATION TRIAL PLACEMENT ON TES T PCB VDE TESTING MASCHINE CAPA BILITY TEST (MCT) 4 HOUR PRODUC TION RUN FULL SAFETY CHECK DOCU MENTATION OF ALL TESTING STEPS SYSTEM ACCEPTANCE TEST ACCORDIN G SCOPE OF SERVICE AND DELIVERY FOR SIPLACE PLACEMENT SYSTEMS |--| A1D50172107-99 |--| A1D5017210799 Siemens
A1D50141099-04 USED TAPE FEEDER MODULE 3X8MM E XCLUSIVELY FOR 0201/0402 COMPON ENTS FOR SIPLACE HS-XX AND SIPL ACE S-20, S-25 HM, S-27 HM, F4, F5 HM. IF MORE THAN TWO 3X8MM 0201/0402 FEEDERS PER HS-XX CHA NGEOVER TABLE ARE IN OPERATION AN ADDITIONAL ADAPTER DEVICE PE R COMPONENT TABLE IS REQUIRED ( ITEM-NO. 119011) IF MORE THAN F OUR 3X8MM 0201/0402 FEEDERS PER SIPLACE S-20, S-25 HM, S-27 HM OR F4, F5 HM CHANGEOVER TABLE WITH WHEELS ARE IN OPERATION AN ADDITIONAL ADAPTER DEVICE PER COMPONENT TABLE IS REQUIRED (IT EM-NO. 118101). IN COMBINATION WITH THE ABOVE MENTIONED ADAPTE R DEVICES A REEL HOLDER IS ALWA YS REQUIRED FOR TWO 3X8MM 0201/ |--| A1D50141099-04 |--| A1D5014109904 Siemens
A1D50188200-99 USED:ACCESSORIES |--| A1D50188200-99 |--| A1D5018820099 Siemens
A1D50332008-99 USED HP DESKJET PRINTER FOR SIP LACE LINE COMPUTER AND VMPS. L INE VOLTAGE 230/110V |--| A1D50332008-99 |--| A1D5033200899 Siemens

Òîâàðû 1 - 63 èç 63
 Íà÷àëî | Ïðåä. | 1 | Ñëåä. | Êîíåö | Ïî ñòð.