KSD2-CI-S - SMART Transmitter Power Supply | KSD2-CI-S - Quad Industry GmbH
Артикул: KSD2-CI-S SMART Transmitter Power Supply | KSD2-CI-S Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com
1-channel 24 V DC supply voltage Lead breakage (LB) and short-circuit (SC) monitoring 4 limit values Transfer of SMART signals Power Rail bus EMC acc. to NAMUR NE 21
Datasheet as PDF in following languages:
Technical Data: KSD2-CI-S Supply Connection Power Rail Rated voltage 20 ... 30 V DC Ripple < 10 % Power loss 1.1 W , increase up to 2.2 W in the case of short-circuit between terminals 1 and 3 or 2 and 3 Power consumption 1.4 W , increase up to 2.2 W in the case of short-circuit between terminals 1 and 3 or 2 and 3 Input Connection terminals 1, 2, 3 Input signal 0 ... 20 mA or 4 ... 20 mA Input resistance approx. 325 Ω , terminals 1, 2 Transmitter supply voltage > 14.7 V at 20 mA Line fault detection breakage I ≤ 50 µA , short-circuit I > 25 mA Output Interface CAN protocol via Power Rail bus Connection Power Rail Transfer characteristics Deviation 0.1 % of output signal range at 20 В°C (68 В°F) Electrical isolation Input/power supply, internal bus basic insulation acc. to EN 50178:1997, rated insulation voltage 300 Veff Directive conformity Electromagnetic compatibility Directive 2004/108/EC EN 61326-1:2006 Standard conformity Insulation coordination EN 50178:1997 Electrical isolation EN 50178:1997 Electromagnetic compatibility NE 21:2006 Protection degree IEC 60529 Climatic conditions IEC 60721 Ambient conditions Ambient temperature -20 ... 60 В°C (-4 ... 140 В°F) Damaging gas acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Protection degree IP20 Connection terminal connection ≤ 2.5 mm2 Mass approx. 100 g Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 in) Mounting DIN rail mounting
Назад в раздел
