| Supply |
| Connection | terminals 34, 50 V+; 35, 51 V- |
| Rated voltage | 8.88 ... 9.5 V |
| Power loss | 6 W |
| Power consumption | 8.5 W |
| Internal bus |
| Connection | backplane bus |
| Interface | manufacturer specific bus |
| Cycle time | 1.6 ms |
| Output |
| Connection | terminals 0+, 1-; 4+, 5-; 8+, 9-; 12+, 13-; 17+, 18-; 21+, 22-; 25+, 26-; 29+, 30- |
| Analog mode | |
| Current | 0 ... 22 mA |
| Load | 0 ... 750 Ω |
| Lead monitoring | breakage: 2 mA ,
short-circuit load < 35 Ω |
| Binary mode | |
| Lead monitoring | breakage: 500 µA ,
short-circuit load < 35 Ω |
| Transfer characteristics |
| Resolution | 13 Bit |
| Step response | HART mode 115 ms (0 ... 99 % of the output signal)
standard mode 18 ms (0 ... 99 % of the output signal) |
| Deviation | 0,1 % of output signal range at 25 °C (298 K) |
| Switching frequency | 15 Hz |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2004/108/EC | EN 61326-1:2006 |
| Explosion protection | |
| Directive 94/9/EC | EN 60079-0: 2006, EN 60079-11: 2007, EN 60079-26: 2007, EN 61241-0: 2006, EN 61241-11: 2006 |
| Standard conformity |
| Insulation coordination | EN 50178 |
| Electrical isolation | EN 60079-11:2007 |
| Electromagnetic compatibility | NE 21 |
| Protection degree | IEC 60529 |
| Climatic conditions | IEC 60721 |
| Ambient conditions |
| Classification | 3K3 |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Storage temperature | -20 ... 100 °C (-4 ... 212 °F) |
| Relative humidity | 95 % non-condensing |
| Shock resistance | 15 g peak, 11 ms period |
| Vibration resistance | 2 g , 10 ... 500 Hz according to IEC 60068-2-6 |
| Damaging gas | acc. to ISA-S71.04-1985, severity level G3 |
| Mechanical specifications |
| Connection type | Terminals |
| Core cross-section | max. 2.5 mm2 |
| Protection degree | IP20, for on-site installation a separate housing is required with a minimum of IP54 |
| Mass | approx. 270 g |
| Mounting | DIN rail mounting |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate | DMT 00 ATEX E 040 X , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection |  II (1)2G EEx ia/ib IIB/IIC
II (1D)(2D) |
| Temperature class | T4 |
| Supply | only in connection with the power units RSD2-PSD2-Ex4.34, RSA6-PSD-Ex4.34 |
| Output | |
| External capacitance | 164 nF |
| External inductance | 3.5 mH |
| Voltage | 21.6 V |
| Current | 92 mA |
| Power | 0.5 W |
| Internal bus | customer specific |
| Statement of conformity | |
| Group, category, type of protection, temperature class | II 3D IP54 T 90°C |
| Electrical isolation | |
| Input/input | no electrical isolation |
| Input/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
| Internal bus/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
| Output/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
| Output/Internal Bus | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
| Output/Output | no electrical isolation |
