ГлавнаяКаталогPepperl-FuchsProcess InterfacesProcess Automation Product
 

RSD-GW-Ex1.MOD - MODBUS RTU gateway | RSD-GW-Ex1.MOD - Quad Industry GmbH

Артикул: RSD-GW-Ex1.MOD
Наименование: MODBUS RTU gateway | RSD-GW-Ex1.MOD
Производитель: Pepperl-Fuchs


  • Connects the IS-RPI system to the control system via ControlNet
  • Fieldbus intrinsically safe EEx ia IIC
  • Device installation in Zone 1, Zone 2, or Zone 22
  • Up to 6 gateways on one intrinsically safe bus network
  • Transfer rate 4800, 9600, 19200, 38400 kBit/s in association with the segment coupler KFD2-BR-Ex1.3MOD.38
  • Up to 8 I/O modules on one gateway via the backplane bus
  • MODBUS RTU with intrinsically safe IEC 61158-2 transmission technology
  • LED status indication
  • Gateway can be replaced under voltage in zone 1 (hot swap)
  • EMC acc. to NAMUR NE 21

Datasheet as PDF in following languages:


Technical Data: RSD-GW-Ex1.MOD

Supply
Connectionterminals V+, V-
Rated voltage8.88 ... 9.5 V
Power loss3.5 W
Power consumption4.25 W
Internal bus
Connectionbackplane bus
Interfacemanufacturer specific bus
Cycle time1.6 ms
External bus
Connectionterminals 1-, 2+
Bus address1 ... 99 , adjustable via switch
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Explosion protection
Directive 94/9/ECEN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2004 , EN 61241-0:2006, EN 61241-1:2006
Standard conformity
Insulation coordinationEN 50178
Electrical isolationEN 60079-11:2007
Electromagnetic compatibilityNE 21:2006
Protection degreeIEC 60529
Climatic conditionsIEC 60721
Ambient conditions
Classification3K3
Ambient temperature-20 ... 70 В°C (-4 ... 158 В°F)
Storage temperature-20 ... 100 В°C (-4 ... 212 В°F)
Relative humidity95 % non-condensing
Shock resistance15 g peak, 11 ms period
Vibration resistance2 g , 10 ... 500 Hz according to IEC 60068-2-6
Damaging gasacc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection typeTerminals
Core cross-sectionmax. 2.5 mm2
Protection degreeIP20, for on-site installation a separate housing is required with a minimum of IP54
Massapprox. 305 g
MountingDIN rail mounting
Data for application in connection with Ex-areas
EC-Type Examination CertificateDMT 99 ATEX E 001 X , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protectionEx-Hexagon II (1)2G EEx ia/ib IIB/IIC
II (1D)(2D)
Temperature classT4
Supplyonly in connection with the power units RSD2-PSD2-Ex4.34, RSA6-PSD-Ex4.34
External bus
Voltage15.75 V
Current250 mA
Power1.93 W
Internal capacitance120 pF
Internal inductancenegligible
Internal buscustomer specific
Statement of conformity
Group, category, type of protection, temperature classEx-Hexagon II 3D IP54 T 90В°C
Electrical isolation
Internal/external busno electrical isolation
Internal bus/power supplysafe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V
External bus/power supplysafe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V

Назад в раздел