| Product Description |
| 24 V DC |
| Supply |
| Connection | terminals 23+, 24- or power feed module/Power Rail |
| Rated voltage | 20 ... 30 V DC |
| Rated current | approx. 100 mA |
| Power loss/power consumption | ≤ 2 W / 2.2 W |
| Input |
| Connection | Input I: intrinsically safe: terminals 1+, 3-
Input II: non-intrinsically safe: terminals 13+, 14- |
| Input I | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
| Pulse duration | > 50 µs |
| Input frequency | 0.001 ... 5000 Hz |
| Lead monitoring | breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA |
| Input II | startup override: 1 ... 1000 s, adjustable in steps of 1 s |
| Active/Passive | I > 4 mA (for min. 100 ms) / I < 1.5 mA |
| Open circuit voltage/short-circuit current | 18 V / 5 mA |
| Output |
| Connection | Output I: terminals 10, 11, 12;
Output II: terminals 16, 17, 18;
Output III: terminals 19+, 20;
Output IV: terminals 8+, 7-; |
| Output I, II | signal, relay |
| Contact loading | 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A |
| Mechanical life | 5 x 107 switching cycles |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Output III | electronic output, passive |
| Contact loading | 40 V DC |
| Signal level | 1-signal: (L+) - 2.5 V (50 mA, short-circuit/overload proof)
0-signal: switched off (off-state current ≤ 10 µA) |
| Output IV | analog |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Open loop voltage | max. 24 V DC |
| Load | max. 650 Ω |
| Fault signal | downscale I ≤ 3.6 mA , upscale ≥ 21.5 mA (acc. NAMUR NE43) |
| Collective error message | Power Rail |
| Transfer characteristics |
| Output IV | |
| Resolution | < 10 µA |
| Accuracy | < 20 µA |
| Influence of ambient temperature | 0.005 %/K (50 ppm) |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 89/336/EEC | EN 61326, EN 50081-2, EN 50082-2 |
| Low voltage | |
| Directive 73/23/EEC | EN 50178 |
| Conformity |
| Insulation coordination | EN 50178 |
| Electrical isolation | EN 50178 |
| Electromagnetic compatibility | NE 21 |
| Protection degree | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Mass | 300 g |
| Dimensions | 40 x 100 x 115 mm (1.6 x 3.9 x 4.5 in) |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate | TГњV 99 ATEX 1471 , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection |  II (1)GD [EEx ia] IIC [circuit(s) in zone 0/1/2] |
| Statement of conformity | TГњV 02 ATEX 1885 X , observe statement of conformity |
| Group, category, type of protection, temperature class | II 3G EEx nAC IIC T4 [device in zone 2] |
| Directive conformity | |
| Directive 94/9/EC | EN 50014, EN 50020, EN 50021 |
