UDBL-18GM35-3E2 - Label sensor | UDBL-18GM35-3E2 - Quad Industry GmbH

Артикул: UDBL-18GM35-3E2
Наименование: Label sensor | UDBL-18GM35-3E2
Производитель: Pepperl-Fuchs


Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com

  • Ultrasonic system for detection of labels, carrier materials and double sheets
  • Weights of paper from 30 g up to cartons weighing over 1200 g can be detected
  • It is also possible to detect thin metal and plastic films.
  • Various materials and thicknesses are programmed in using a TEACH-IN signal
  • No automatic switching treshold tracking in the case of slowly changing ambient conditions
  • Signal output via short-circuit proof PNP switch outputs
  • Very high processing speeds are possible.

Datasheet as PDF in following languages:


Technical Data: UDBL-18GM35-3E2

General specifications
Transducer frequency180 kHz
Indicators/operating means
LED greenindication: carrier material detected
LED yellowindication: label detected
LED redindication: double sheet detected
Electrical specifications
Operating voltage20 ... 30 V DC , ripple 10 %SS
No-load supply current< 80 mA
Input
Input type1 pulse input for Teach-In
Pulse length≥ 100 ms
Impedance≥ 10 kOhm
Voltage12 ... 30 V
Output
Output type3 switch outputs PNP, NO
Rated operating current3 x 200 mA
Voltage drop≤ 2 V
Switch-on delay≤ 1 ms
Switch-off delay≤ 1 ms
Approvals and certificates
UL approvalC-UL listed: 57M3, IND CONT. EQ., "Powered by Class 2 Power Source"
Ambient conditions
Ambient temperature0 ... 60 В°C (32 ... 140 В°F)
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Mechanical specifications
Protection degreeIP65
Connectionemitter: V1-W connector with 2.5 m cable
receiver: 2.5 m fixed cable (not disconnectable)
S1,S2: 2 connectors V1-W, M12x1 (included with delivery)
Material
HousingMakrolon/nickel-plated brass
Mass370 g


Назад в раздел