| Product Description |
| Single head system |
| General specifications |
| Sensing range | 30 ... 300 mm |
| Adjustment range | 50 ... 300 mm |
| Unusable area | 0 ... 30 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 380 kHz |
| Response delay | 21 ms minimum
63 ms factory setting |
| Indicators/operating means |
| LED green | solid: Power-on
flashing: Standby mode or program function object detected |
| LED yellow 1 | solid: switching state switch output 1
flashing: program function |
| LED yellow 2 | solid: switching state switch output 2
flashing: program function |
| LED red | solid: temperature/program plug not connected
flashing: fault or program function object not detected |
| Temperature/TEACH-IN connector | Temperature compensation , Switch points programming , output function setting |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 50 mA |
| Interface |
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| Input/Output |
| Synchronization | bi-directional
0 level -UB...+1 V
1 level: +4 V...+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency | |
| Common mode operation | max. 95 Hz |
| Multiplex operation | ≤ 95 Hz / n , n = number of sensors , n ≤ 5
|
| Output |
| Output type | 2 switch outputs NPN, NO/NC, programmable |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Switching frequency | ≤ 7 Hz |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation) |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient conditions |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 5-pin |
| Protection degree | sensor head: IP67
connector sensor head/controller unit: IP52 |
| Material | |
| Housing | stainless steel (1.4305 / AISI 303)
PBT plastic parts |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 210 g |
