LD28/LV28-Z-F2/49/76a/82b/116 - Thru-beam sensor | LD28/LV28-Z-F2/49/76a/82b/116 - Quad Industry GmbH

Артикул: LD28/LV28-Z-F2/49/76a/82b/116
Наименование: Thru-beam sensor | LD28/LV28-Z-F2/49/76a/82b/116
Производитель: Pepperl-Fuchs


Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com

  • Ultra bright LEDs for power on, pre fault indication and switching state
  • Highly visible LED as alignment aid in receiver optics
  • Emitter deactivation
  • Various transmitter frequencies
  • Programmable time function GAN, GAB, IAB and GAN-IAB as double function
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Waterproof, protection degree IP67
  • Protection class II

Datasheet as PDF in following languages:


Technical Data: LD28/LV28-Z-F2/49/76a/82b/116

Product Description
Thru-beam sensor
System components
EmitterLD28-F2/76a/116
ReceiverLV28-Z-F2/49/82b/116
General specifications
Effective detection range0 ... 30 m
Threshold detection range40 m
Light sourceLED
Light typemodulated visible red light , 660 nm
Diameter of the light spotapprox. 0.6 m at 30 m
Angle of divergenceEmitter 1.2°,
Receiver 5°
Functional safety related parameters
MTTFd620 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function displayLED yellow:
1. LED lit constantly: signal > 2 x switching point (function reserve)
2. LED flashes: signal between 1 x switching point and 2 x switching point
3. LED off: signal < switching point
Controlssensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light/Dark switch
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typelight/dark on, switchable . (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.)
Signal output1 NPN, 1 PNP synchronized-switching, short-circuit protected, reverse polarity protected , open collectors
Compliance with standards and directives
Standard conformity
Product standardEN 60947-5-2:2007
Mechanical specifications
Protection degreeIP67
Connectionterminal compartment with 8 spring-loaded terminals for wire cross section 0.5 ... 1.5 mm2 , Insulation stripping 7.5 ... 8.5 mm , M16 x 1.5 cable gland


Назад в раздел