RLK28-55-Z-2466/31/115d - Retroreflective sensor | RLK28-55-Z-2466/31/115d - Quad Industry GmbH
Артикул: RLK28-55-Z-2466/31/115d
Наименование: Retroreflective sensor | RLK28-55-Z-2466/31/115d
Производитель: Pepperl-Fuchs
|
|
- Ultra bright LEDs for power on, pre fault indication and switching state
- Programmable time function GAN, GAB, IAB, as well as GAN-GAB and GAN-IAB as double function
- Not sensitive to ambient light, even with switched energy saving lamps
- Protection class II
Datasheet as PDF in following languages: Technical Data: RLK28-55-Z-2466/31/115d| Product Description | | Retroreflective sensor with polarization filter | | General specifications | | Effective detection range | 0 ... 17 m | | Threshold detection range | 21 m
| | Light source | LED | | Light type | modulated visible red light , 660 nm | | Diameter of the light spot | approx. 290 mm at a distance of 17 m | | Angle of divergence | emitter 1.2В°
receiver 2В° | | Functional safety related parameters | | MTTFd | 940 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Indicators/operating means | | Function display | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted | | Controls | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light/Dark switch | | Electrical specifications | | Operating voltage | 12 ... 240 V AC/DC | | Output | | Switching type | light/dark on, switchable (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) | | Signal output | Relay, 1 alternator | | Compliance with standards and directives | | Standard conformity | | | Product standard | EN 60947-5-2:2007 | | Mechanical specifications | | Protection degree | IP65 | | Connection | 7-pin surface-mounted connector, up to 250 VAC (without cable socket) |
|
Назад в раздел
|
