| Product Description |
| EtherNet/IP Gateway with integrated safety monitor, double master for 2 AS-Interface networks |
| General specifications |
| AS-Interface specification | V3.0 |
| Duplicate address detection | from AS-Interface slaves |
| Earth fault detection | integrated |
| EMC monitoring | integrated |
| Diagnostics function | Extended function via display |
| Switch-on delay | < 10 s |
| Response delay | < 40 ms |
| UL File Number | E223772 |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 3 |
| Performance level (PL) | PL e |
| MTTFd | 200 a |
| B10d | 2 E+7 |
| Indicators/operating means |
| Display | Illuminated graphical LC display for addressing and error messages |
| LED ETHERNET | Ethernet detected; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED PRG ENABLE | autom. programming; LED green |
| LED POWER | voltage ON; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| LED EDM/Start | External device monitoring circuit inputs closed, 4x yellow LEDs |
| LED output circuit | Output circuit closed; 4 x green LEDs |
| Button | 4 |
| Electrical specifications |
| Insulation voltage | ≥ 500 V |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; Output K3 and K4 24 V DC |
| Rated operating current | ≤ 300 mA off AS interface network 1
≤ 300 mA off AS interface network 2
≤ 370 mA in total |
| Interface |
| Interface type | RJ-45 |
| Protocol | EtherNet/IP |
| Transfer rate | 10 MBit/s ... 100 MBit/s , Automatic baud rate detection |
| Interface 2 |
| Interface type | Chip card slot |
| Interface 3 |
| Interface type | RS 232, serial |
| Input |
| Number/Type | 4 EDM/Start inputs:
EDM: Inputs for the external device monitoring circuits
Start: start inputs:
Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 μs) |
| Output |
| Safety output | Output circuits 1 and 2: 2 potential-free contacts,
max. contact load:
3 ADC-13 at 30 VDC,
3 AAC-15 at 30 VAC
Output circuits 3 and 4: 2 PNP transistor outputs
max. contact load:
0.5 ADC-13 at 30 VDC |
| Connection |
| Ethernet | RJ-45 |
| AS-Interface | spring terminals, removable |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Standard conformity | |
| Shock and impact resistance | EN 61131-2:2004 |
| Ambient conditions |
| Ambient temperature | 0 ... 55 В°C (32 ... 131 В°F) |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Material | |
| Housing | Stainless steel |
| Mass | 860 g |
| Construction type | Low profile housing , Stainless steel |
