ГлавнаяКаталогjungWS1WS10WS10H
 

WS10H - KNX Devices Brightness sensor Rated voltage 24 V DC range 0 ... 60 000 lux, linear - Quad Industry GmbH

Артикул: WS10H
Наименование: KNX Devices Brightness sensor Rated voltage 24 V DC range 0 ... 60 000 lux, linear
Производитель: JUNG




KNX Devices

Brightness sensor
Rated voltage 24 V DC
range 0 ... 60 000 lux, linear

The brightness sensor is used for the measuring and evaluation of the brightness.
The dawn sensor is used for the measuring and evaluation of the brightness (dawn/dusk).
The temperature sensor is used for the measuring and evaluation of the temperature.
The value measured by the sensor is transmitted to an analogue output signal of 0 ... 10 V by the electronics.
Connections:
Plastic housing with PG7 thread + screw and pressure / moisture compensation (recommended cable 3 x 0.25 mm2)
+UB: operating voltage 24 V DC
GND: corresponding ground
OUT: output 0 ... 10 V

Technical data
Supply voltage: 24 V DC (15 ... 30 V DC)
Connection: screw terminals
Terminals for: 2.5 mm2
Connecting cable: through screwed conduit entry PG 7
Recommended cable: 3 x 0,25 mm2
Cable length: max. 100 m
Output: 0 ... 10 V DC (into a load of at least 1 k?, short-circuit protected)
Ambient temperature: ?30 ... +70 °C
Protection level: IP 65
Mounting position: optional

Dimensions: 58 x 35 x 64 mm

Manufacturer: JUNG
Ref.-no.: WS 10 H

Назад в раздел