ГлавнаяКаталогjungUD1UD12UD125
 

UD1255REG - Universal dimmer Rail mounting device, 2 rail units 50 ... 500 W/VA - Quad Industry GmbH

Артикул: UD1255REG
Наименование: Universal dimmer Rail mounting device, 2 rail units 50 ... 500 W/VA
Производитель: JUNG




Universal dimmer
Rail mounting device, 2 rail units
50 ... 500 W/VA


Intended use
*     Switching and dimming of incandescent lamps, HV halogen lamps and dimmable inductive transformers or TRONIC transformers with halogen lamps
*     Suitable for mixed load up to the specified output
*     Installation in distribution boxes on DIN rail according to EN 60715


Product characteristics
*     Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
*     Electronic overtemperature protection
*     Connection of more than one satellite is possible
*     Connection for central satellites
*     Switch-on via lamp-saving soft start
*     Suitable amplifiers: ULZ 1215 REG, 247 EB or 246 EB (max. 10)
When using 247 EB or 246 EB, charge dimmer with minimum capacity.
*     Automatic setting of the dimming principle suitable for the load

Operation with standard centre plate ..1561.07.. and satellite insert 1220 NE
number of satellite units: unlimited
total length of satellite cables: max. 100 m

Mechanical push-button (make contact, not illuminated) as local satellite unit:
brief press: On / Off
long press: brightness variation
number of satellite units: unlimited
total cable length: max. 100 m

Note:
Illuminated mechanical push-buttons must be equipped with a separate N-terminal.
Storing the switch-on brightness is NOT possible with mechanical push-buttons.
Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Connected load: 50 ... 500 W/VA
Type of loads: 230 V incandescent lamps (resistive load, trailing edge phase control)
230 V halogen lamps (resistive load, trailing edge phase control)
TRONIC transformers (capacitive load, trailing edge phase control)
inductive transformers (inductive load, leading edge phase control)
Mix of the specified load types (do not mix capacitive loads with inductive loads).
When using mixed loads with inductive transformers, the ohmic load must not exceed 50 %.
Rated power loss: 5 W
Ambient temperature: +45 °C
Connection: screw terminals
single wire: 1.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
stranded without ferrule: 0.75 ... 4 mm2
Approvals: VDE

Version: 1-channel

Manufacturer: JUNG
Ref.-no.: UD 1255 REG

Назад в раздел