FST1240REG - Radio Management Radio push-button controller for rail mounting Rail mounting device, 4 rail units for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V - Quad Industry GmbH

Артикул: FST1240REG Наименование: Radio Management Radio push-button controller for rail mounting Rail mounting device, 4 rail units for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Производитель: JUNG Radio Management Radio push-button controller for rail mounting Rail mounting device, 4 rail units for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Intended use *     Radio-controlled switching and brightness setting for lamp operating devices with 1-10 V interface *     Operation with suitable radio transmitters in combination with a radio receiver RMD *     Installation in distribution boxes on DIN rail according to DIN EN 60715 Product characteristics *     Switch-on brightness can be saved permanently *     Light scene operation possible *     Constant light regulation possible in connection with a radio presence detector *     Shut-off delay of approx. 1 minute in connection with radio motion detectors Technical data Rated voltage: AC 230 V ~, 50/60 Hz Control voltage: 1 ... 10 V Control current: max. 15 mA Electrical isolation: 2 kV basic insulation Switch contact: ? relay contact, mains potential Connected load Ohmic load: max. 1800 W Electronic ballast, transformer: depending on type Circuit breaker: max. 10 A Connectionscrew terminals single wire: 1.5 ... 4 mm2 stranded without ferrule: 0.75 ... 4 mm2 stranded with ferrule: 0.5 ... 2.5 mm2 Operating temperature: approx. 0 ... +45 °C Mounting width: 72 mm (4 rail units) Number of possible radio transmitters: max. 30 Approvals: VDE Version: 1-channel Manufacturer: JUNG Ref.-no.: FST 1240 REG

Назад в раздел