FST1240EB - Radio Management Radio push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V - Quad Industry GmbH

Артикул: FST1240EB Наименование: Radio Management Radio push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Производитель: JUNG Radio Management Radio push-button controller, built-in for dimming of fluorescent lamps controlled by electronic ballasts or TRONIC transformers with control voltage 1 – 10 V Intended use *     Radio-controlled switching and brightness setting for lamp operating devices with 1-10 V interface *     Installation in false ceilings or surface mounting *     Operation with suitable radio transmitters Product characteristics *     Switch-on brightness can be saved permanently *     Switch-on via lamp-saving soft start *     Light scene operation possible *     Constant light regulation possible in connection with a radio presence detector *     Shut-off delay of approx. 1 minute in connection with radio motion detectors Technical data Rated voltage: AC 230 V ~, 50/60 Hz Control voltage: 1 ... 10 V Control current: max. 15 mA Electrical isolation: 2 kV basic insulation Switch contact: ? relay contact, mains potential Connected load: Ohmic load: max. 1800 W Electronic ballast, transformer: depending on type Circuit breaker: 10 A Contact type: ? relay contact Temperature range: ?20 ... +55 °C Protection level: IP 20 Dimensions (L x W x H): 187 x 28 x 28 mm Carrier frequency: 433.42 MHz (ASK) Number of possible radio transmitters: max. 30 Manufacturer: JUNG Ref.-no.: FST 1240 EB

Назад в раздел