ГлавнаяКаталогjungFA1FA14FA14RE
 

FA14REG - Radio Management Radio switch actuator for rail mounting Rail mounting device, 4 rail units - Quad Industry GmbH

Артикул: FA14REG
Наименование: Radio Management Radio switch actuator for rail mounting Rail mounting device, 4 rail units
Производитель: JUNG




Radio Management

Radio switch actuator for rail mounting
Rail mounting device, 4 rail units

Intended use
*     Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps and TRONIC or inductive transformers with halogen lamps
*     Operation with suitable radio transmitters in combination with RMD radio receivers or via extension units
*     Suitable for mixed operation up to the specified output
*     Installation in distribution boxes on DIN rail according to DIN EN 60715


Product characteristics
*     Connection of installation buttons as extensions possible
*     Light scene operation possible
*     2-point light control in combination with a radio presence detector
*     When a taught radio motion detector telegram is received the switch actuator switches on for approx. 1 minute (shut-off delay)

Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Switch contact: 4 x relay (10 A), floating contacts
Switching capacity per channel
Incandescent lamps: 2300 W
HV halogen lamps: 2300 W
Inductive transformers with LV halogen lamps: 1000 W
Electronic transformers with LV halogen lamps: 1500 W
Fluorescent lamps
– non-compensated: 1200 W
– parallel compensated: 920 W
– lead-lag circuit: 2300 W
Contact type: floating make contact (µ contact)
Switching current: 10 A
Connectionscrew terminals
single wire: 1.5 ... 4 mm2
stranded without ferrule: 0.75 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Operating temperature: approx. 0 ... +45 °C
Mounting width: 72 mm (4 rail units)
Approvals: VDE

Version: 4-channel

Manufacturer: JUNG
Ref.-no.: FA 14 REG

Назад в раздел