FA10REG - Radio Management Radio actuator Rail mounting device, 2 rail units - Quad Industry GmbH

Артикул: FA10REG
Наименование: Radio Management Radio actuator Rail mounting device, 2 rail units
Производитель: JUNG




Radio Management

Radio actuator
Rail mounting device, 2 rail units

Intended use
*     Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps and TRONIC or inductive transformers with halogen lamps
*     Operation with suitable radio transmitters in combination with RMD radio receivers or via extension units
*     Suitable for mixed operation up to the specified output
*     Installation in distribution boxes on DIN rail according to DIN EN 60715


Product characteristics
*     Connection of installation buttons as extensions possible
*     Light scene operation possible
*     2-point light control in combination with a radio presence detector
*     When a taught radio motion detector telegram is received the switch actuator switches on for approx. 1 minute (shut-off delay)

Technical data
Rated voltage: AC 230 V ~, 50/60 Hz
Switch contact: relay (10 A), mains potential
Switching capacity
Incandescent lamps: 2300 W
HV halogen lamps: 2300 W
Inductive transformers with LV halogen lamps: 1000 W
Electronic transformers with LV halogen lamps: 1500 W
Fluorescent lamps
– non-compensated: 1200 W
– parallel compensated: 920 W
– lead-lag circuit: 2300 W
Contact type: ? relay contact
Connectionscrew terminals
single wire: 1.5 ... 4 mm2
stranded without ferrule: 0.75 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Operating temperature: approx. 0 ... +45 °C
Number of satellite units: unlimited, e.g. satellite insert ref.-no. 1220 NE or push-button insert (make contact) ref.-no. 531 U
Mounting width: 36 mm (2 rail units)
Number of possible radio transmitters: max. 30

Version: 1-channel

Manufacturer: JUNG
Ref.-no.: FA 10 REG

Назад в раздел