A2178ORTSWW - A range
Room autostat
Duroplastic (scratch-proof) glossy
with integrated BCU
with integrated push-button interface 4-gang
without rotary knob for set point adjustment
without any operational elements
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Heating, A/C, ventilation
Product type: Regulator - Quad Industry GmbH
Артикул: A2178ORTSWW
Наименование: A range
Room autostat
Duroplastic (scratch-proof) glossy
with integrated BCU
with integrated push-button interface 4-gang
without rotary knob for set point adjustment
without any operational elements
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Heating, A/C, ventilation
Product type: Regulator
Производитель: JUNG
|
|
A range
Room autostat
Duroplastic (scratch-proof) glossy
with integrated BCU
with integrated push-button interface 4-gang
without rotary knob for set point adjustment
without any operational elements
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Heating, A/C, ventilation
Product type: Regulator
Intended use
* Single-room temperature control in KNX installations
* Integrated 4-gang binary input for universal use
* Installation in appliance box according to DIN 49073
* Recommended for installations in public buildings
Product characteristics
* Measurement of room temperature and comparison with setpoint temperature
* Setpoint specification by selection of the operating mode
* Operating modes: Comfort, Standby, Night operation, Frost/heat protection
* Heating and cooling mode
* Heating and cooling with basic and additional step
* Operation solely via the bus
* Push-button interface with four inputs or two outputs (0.8 mA) and two inputs, e.g. for window contacts, push-buttons, LEDs, etc.
* Function of the inputs: switching, dimming, shutter control, light scene extension, brightness or temperature value transmitter
* Option: External temperature sensor (accessory ref.-no.: FF 7.8) connectable to input 4
Technical data
Rated voltage KNX: DC 21 ... 32 V SELV
Current consumption KNX: max. 7.5 mA
Connection, KNX: terminal
Ambient temperature: ?5 ... +45 °C
Storage/transport temperature: ?25 ... +70 °C
Output current: 0.8 mA
Inputs and outputs
Cable type: J-Y(St)Y 2 x 2 x 0.8 mm2
Cable length: max. 5 m
Temperature sensor cable length: max. 50 m
Use deep wall box for cables with 1.5 mm2
Material: duroplastic
Colour: white
Manufacturer: JUNG
Ref.-no.: A 2178 ORTS WW
|
Назад в раздел
|