40FW - Radio Management Flush-mounted radio transmitter Installation into standard wall box or with surface cap Installation into standard wall box Battery-operated with two lithium button cells (CR2032) which are included. Battery life: approx. 2 years. The flush-mounted transmitter is operated in combination with standard push-button sensors (1-gang, 2-gang or 4-gang). After the push-button sensor is pressed, the transmitter sends a radio telegram which is understood and evaluated by all the receivers of the Radio Management system. The number of radio channels available depends on the sensor control used. - Quad Industry GmbH

Артикул: 40FW Наименование: Radio Management Flush-mounted radio transmitter Installation into standard wall box or with surface cap Installation into standard wall box Battery-operated with two lithium button cells (CR2032) which are included. Battery life: approx. 2 years. The flush-mounted transmitter is operated in combination with standard push-button sensors (1-gang, 2-gang or 4-gang). After the push-button sensor is pressed, the transmitter sends a radio telegram which is understood and evaluated by all the receivers of the Radio Management system. The number of radio channels available depends on the sensor control used. Производитель: JUNG Radio Management Flush-mounted radio transmitter Installation into standard wall box or with surface cap Installation into standard wall box Battery-operated with two lithium button cells (CR2032) which are included. Battery life: approx. 2 years. The flush-mounted transmitter is operated in combination with standard push-button sensors (1-gang, 2-gang or 4-gang). After the push-button sensor is pressed, the transmitter sends a radio telegram which is understood and evaluated by all the receivers of the Radio Management system. The number of radio channels available depends on the sensor control used. Intended use *     Radio transmitter for transmission of switching, dimming, blind movement and light scene commands *     Operation via push-button sensors *     Installation in appliance box according to DIN 49073 or in surface-mounted housing *     Operation with suitable radio actuators Product characteristics *     Number of radio channels dependent on push-button used *     Each two opposite buttons belong to one channel *     Functions can be set with 4gang function switch *     Special functions "All Off" or "Light scene" can be assigned to individual buttons *     Battery-powered device Technical data Rated voltage: DC 6 V Battery type: 2 x lithium CR 2032 Ambient temperature: 0 ... +55 °C Relative humidity: max. 80 % (no condensation) Carrier frequency: 433.42 MHz (ASK) Manufacturer: JUNG Ref.-no.: 40 FW

Назад в раздел