3210UP - KNX Devices Flush-mounted dimming actuator, 1-gang, 50 – 210 W/VA with satellite input 2 binary inputs ETS product family: Illumination Product type: Dimmer - Quad Industry GmbH

Артикул: 3210UP Наименование: KNX Devices Flush-mounted dimming actuator, 1-gang, 50 – 210 W/VA with satellite input 2 binary inputs ETS product family: Illumination Product type: Dimmer Производитель: JUNG KNX Devices Flush-mounted dimming actuator, 1-gang, 50 – 210 W/VA with satellite input 2 binary inputs ETS product family: Illumination Product type: Dimmer Intended use *     Switching and dimming of incandescent lamps, 230 V halogen lamps and LV halogen lamps with inductive transformers or Tronic transformers *     Installation in appliance box to DIN 49073 Product characteristics *     Automatic selection of the dimming principle suitable for the load *     Protected against no-load, short-circuit and overheating *     Feedback of the switching position and the dimming value *     Parameterisable switch-on and dimming behaviour *     Timed dimmer: switch-on delay, switch-off delay, staircase lighting timer *     Light scene operation *     Two binary inputs for potential-free contacts, usable as extension inputs for local operation *     Supply via bus, no additional power supply necessary *     Mains failure longer than approx.0.7 seconds leads to switch-off of the dimmer actuator Technical data Output: 1 Power MOS-FET Dimming method: trailing edge or leading edge phase control Terminals Output cable: L = black, dimming output = brown, 0.75 mm2 length approx. 20 cm Bus and control cable: KNX + red KNX – black binary input 1 green GND white binary input 2 yellow GND brown length approx. 33 cm, extendible to 5 m max. Satellite input: depending on parameterization either as extension inputs for push-button local control of the actuator or as independent binary inputs acting on the bus Dimensions: ? 63 mm, height 25 mm Rated voltage: AC 230 V ~, 50/60 Hz Rated current: 0.9 A Minimum load: 50 W Power loss: 2 W Total connected load: 210 W/VA Ohmic load: 50 ... 210 W Incandescent lamps: 50 ... 210 W HV halogen lamps: 50 ... 210 W Inductive transformers with LV halogen lamps: 50 ... 210 VA Electronic transformers with LV halogen lamps: 50 ... 210 VA Mix of the specified load types (do not mix capacitive loads with inductive loads). When using mixed loads with inductive transformers, the ohmic load must not exceed 50 %. Approvals: VDE Manufacturer: JUNG Ref.-no.: 3210 UP

Назад в раздел