2501HZUP - KNX Devices Flush-mounted heating actuator, 1-gang with satellite input 3 binary inputs 1 output "TRIAC" ETS product family: Heating, A/C, Ventilation Product type: Valve - Quad Industry GmbH

Артикул: 2501HZUP Наименование: KNX Devices Flush-mounted heating actuator, 1-gang with satellite input 3 binary inputs 1 output "TRIAC" ETS product family: Heating, A/C, Ventilation Product type: Valve Производитель: JUNG KNX Devices Flush-mounted heating actuator, 1-gang with satellite input 3 binary inputs 1 output "TRIAC" ETS product family: Heating, A/C, Ventilation Product type: Valve Intended use *     Switching of electrothermal actuators *     Installation in appliance box to DIN 49073 *     Connection with enclosed terminals Product characteristics *     Control of electrothermal actuators *     Three binary inputs for potential-free contacts, usable as extension inputs for local operation *     Supply via bus, no additional power supply necessary *     Switching operation or PWM operation *     Actuators with characteristics opened or closed without power *     Overload-protected, short circuit-protected *     Protection against jamming valves *     Forced position *     Cyclical monitoring of the input signals configurable PWM operation: electrothermal actuators only have the positions Open and Closed. In PWM operation, switch-on and switch-off during the drive’s cycle time achieves an almost constant behaviour. Technical data Rated voltage: AC 230/240 V ~, 50/60 Hz Switching voltage: AC 250 V ~ Ambient temperature: ?5 ... +45 °C Storage/transport temperature: ?25 ... +70 °C Heating output Contact type: semiconductor (triac), ? Switching current: 5 ... 25 mA Switch-on current: max. 600 mA (2 s) Number of drives per output: max. 2 Control cable: YY6x0.6 Input type: floating contact Total cable length: max. 5 m Voltage satellite inputs: approx. 5 V Dimensions (? x H): 53 x 28 mm Connection: screwles terminals single wire: 1 ... 2.5 mm2 KNX supply: DC 21 ... 32 V SELV Power consumption KNX: max. 240 mW Connection, KNX: terminal connected to control cable Approvals: VDE Manufacturer: JUNG Ref.-no.: 2501 HZ UP

Назад в раздел