246EB - Amplifier for conventional dimmers, built-in
for the extension of LV dimmers and Universal dimmers with inductive load
e.g. for false ceilings
mains + neutral conductor required - Quad Industry GmbH
Артикул: 246EB
Наименование: Amplifier for conventional dimmers, built-in
for the extension of LV dimmers and Universal dimmers with inductive load
e.g. for false ceilings
mains + neutral conductor required
Производитель: JUNG
|
|
Amplifier for conventional dimmers, built-in
for the extension of LV dimmers and Universal dimmers with inductive load
e.g. for false ceilings
mains + neutral conductor required
Intended use
* Output extension of LV dimmers with leading edge phase control
* Output extension of universal dimmers, which have detected an inductive basic load
* Connection of incandescent lamps, HV halogen lamps and dimmable inductive transformers with halogen lamps
* Suitable for mixed operation up to the specified output
* Do not operate the corresponding dimmers without a load
* Installation in false ceilings or surface mounting
Product characteristics
* Connection of multiple power extensions to one dimmer possible
* Operation using upstream dimmer
* Lamp-beneficial soft start
* Electronic short circuit protection with permanent switch-off
* Electronic overtemperature protection
* Suitable dimmers: 1224 LED UDE, 1225 SDE, 254 UDIE1, 225 NVDE, 266 GDE, 211 GDE, UD 1255 REG, FM UD 20250 UP, FM UD 5500 REG, FM UD 420250 REG
Technical data
Rated voltage: AC 230 V ~, 50 Hz
Connected load: 100 ... 600 W/VA
Dimming method: leading edge phase control
Type of loads: 230 V incandescent lamps
230 V halogen lamps
inductive transformers
Mixed loads of the specified types
Ambient temperature: max. 45 °C
Housing temperature: max. 70 °C
Dimensions: 212 x 48.5 x 46 mm
Connection: screw terminals
single wire: max. 4 mm2
stranded with ferrule: max. 1.5 mm2
stranded without ferrule: max. 2.5 mm2
Operate inductive transformers with at least 85 % nominal load.
Manufacturer: JUNG
Ref.-no.: 246 EB
|
Назад в раздел
|