ГлавнаяКаталогjung245245.2245.20
 

245.20 - Speed regulator insert (rotary on/off) with slat adjusting - Quad Industry GmbH

Артикул: 245.20
Наименование: Speed regulator insert (rotary on/off) with slat adjusting
Производитель: JUNG




Speed regulator insert (rotary on/off)
with slat adjusting

Intended use
*     Speed controller for speed control of single-phase motors such as induction, shaded-pole or universal motors
*     Installation in appliance box according to DIN 49073


Product characteristics
*     Short-circuit protection through fine-wire fuse
*     Electronic overtemperature protection
*     Switching output e.g. for ohmic loads or for activating ventilation openings. The maximum load capacity of the switching output depends on the motor current. By reducing the motor current it is possible to switch slats or ohmic loads with higher current consumption.
*     Measuring points make it possible to check the connected voltages without dismantling the speed controller.

Technical data
Rated voltage: AC 230/240 V ~, 50/60 Hz
Connected load: 0.1 ... 2.7 A (flush-mounted)
0.1 ... 2.5 A (surface-mounted)
Fuse, type: T 3.15 A H 250 V
Connection: screwless connection
Terminals for: 2 x 1 ... 2.5 mm2
Approvals: VDE

Manufacturer: JUNG
Ref.-no.: 245.20

Назад в раздел