ÃëàâíàÿÊàòàëîãjung23023082308.1
 

2308.16REGHE - KNX Devices Switch / blinds actuator, 8/4-gang Rail mounting device, 4 rail units Switch actuator: max. 8-gang Blind actuator: max. 4-gang Max. 4-gang switch actuator/2-gang blind actuator in combination with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output - Quad Industry GmbH

Àðòèêóë: 2308.16REGHE
Íàèìåíîâàíèå: KNX Devices Switch / blinds actuator, 8/4-gang Rail mounting device, 4 rail units Switch actuator: max. 8-gang Blind actuator: max. 4-gang Max. 4-gang switch actuator/2-gang blind actuator in combination with manual electronic operation and LED status indication Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output
Ïðîèçâîäèòåëü: JUNG




KNX Devices

Switch / blinds actuator, 8/4-gang
Rail mounting device, 4 rail units
Switch actuator: max. 8-gang
Blind actuator: max. 4-gang
Max. 4-gang switch actuator/2-gang blind actuator in combination
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output

Intended use
*     Switching of AC 110 ... 230 V electrical loads with floating contacts
*     Switching of electrically-driven blinds, shutters, awnings and similar hangings
*     Mounting on DIN rail in small distributors


Product characteristics
*     Outputs can be operated manually, construction site mode
*     Feedback in manual mode and in bus mode
*     Light scene function
*     Disabling of individual outputs manually or via bus


Characteristics switch operation
*     Operation as NO or NC contacts
*     Logic and restraint function
*     Feedback function
*     Central switching function with centralized feedback
*     Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function


Characteristics blinds operation
*     Suitable for 110 ... 230 V AC motors
*     Hanging position directly controllable
*     Slat position directly controllable
*     Feedback of movement status, blind/shutter position and slat position
*     Forced position through higher-level controller
*     Safety function: 3 independent wind alarms, rain alarm, frost alarm
*     Sun protection function


The total current of two adjacent outputs must not exceed 20 A.

Technical data
Power supply
Rated voltage: AC 110 V (?10 %) ... 240 V (+10 %)
Mains frequency: 50 / 60 Hz
Power loss: max. 3 W
Ambient temperature: ?15 ... +45 °C
Storage/transport temperature: ?25 ... +70 °C
Outputs
Contact type: floating relay contacts (? contact)
Switch type: make contact
Switching voltage: AC 250 V ~
Switching current AC1 (cos ? > 0.8): 16 A
Fluorescent lamps: 16 AX
Current carrying capacity
Neighbouring outputs: ? 20 A
Device: ? 80 A
Loads per output
Ohmic load: 3000 W
Capacitive load: 16 A / 140 µF
Motors: 1380 VA
Switch-on current 200 µs: max. 800 A
Switch-on current 20 ms: max. 165 A
Lamp loads
Incandescent lamps: 3000 W
HV halogen lamps: 2500 W
Electronic transformers with LV halogen lamps: 1500 W
Inductive transformers with LV halogen lamps: 1200 VA
Fluorescent lamps T5/T8
non-compensated: 1000 W
parallel compensated: 1160 W / 140 µF
lead-lag circuit: 2300 W / 140 µF
Compact fluorescent lamps
non-compensated: 1000 W
parallel compensated: 1160 W / 140 µF
Mercury vapour lamps
non-compensated: 1000 W
parallel compensated: 1160 W / 140 µF
Connection, power supply and load
Connection mode: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
KNX
Rated voltage KNX: DC 21 ... 32 V SELV
Power consumption KNX: typical 150 mW
Connection, KNX: terminal
Approvals: VDE

Manufacturer: JUNG
Ref.-no.: 2308.16 REGHE

Íàçàä â ðàçäåë