ÃëàâíàÿÊàòàëîãjung23023082308.1
 

2308.16REGCHM - KNX Devices Switch actuator with C-load, 8-gang with current detection Rail mounting device, 8 rail units 8 make contacts with manual mechanical operation and status indicator Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output - Quad Industry GmbH

Àðòèêóë: 2308.16REGCHM
Íàèìåíîâàíèå: KNX Devices Switch actuator with C-load, 8-gang with current detection Rail mounting device, 8 rail units 8 make contacts with manual mechanical operation and status indicator Only with the ETS 3.0d version or later versions the full functionality will be available. ETS product family: Output Product type: Binary output
Ïðîèçâîäèòåëü: JUNG




KNX Devices

Switch actuator with C-load, 8-gang
with current detection
Rail mounting device, 8 rail units
8 make contacts with manual mechanical operation and status indicator
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Output
Product type: Binary output

Intended use
*     Switching of 110 ... 230 V AC or 24 V AC/DC electrical loads with floating contacts
*     Mounting on DIN rail according to EN 60715 in distribution boxes


Product characteristics
*     Manual operation of the relay independently of the bus
*     Operation as NO or NC contacts
*     Logic and restraint function
*     Switching feedback (bus operation only)
*     Switch position display
*     Central switching function with centralized feedback
*     Disabling function for each channel
*     Timing functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
*     Integration into light scenes
*     Operating hours meter, configurable via bus
*     Input monitoring for cyclical updating with safety circuit
*     No additional power supply necessary

*     Current detection: measurement of the load current for each output
*     Monitoring of threshold values for load monitoring, e.g. for reporting load drop-out
*     Switching of capacitive loads and the resulting high switch-on currents

Technical data
Rated voltage KNX: DC 21 ... 32 V SELV
Connection, KNX: KNX bus connection block
Power consumption KNX: typical 240 mW
Power loss: max. 8 W
Ambient temperature: ?5 ... +45 °C
Storage/transport temperature: ?25 ... +70 °C
Mounting width: 144 mm (8 rail units)
Connection, outputs: screw terminals
single wire: 0.5 ... 4 mm2
stranded without ferrule: 0.5 ... 4 mm2
stranded with ferrule: 0.5 ... 2.5 mm2
Current detection (sine)
Mains frequency: 50 / 60 Hz
Measuring range: 0.25 ... 16 A
Accuracy (? 1 A): ±100 mA
Accuracy (> 1 A): ±8 % of curr. val.
Switching outputs
Contact type: floating relay contacts (? contact)
Switching voltage AC: AC 250 / 400 V
Switching current 230 V AC1: 16 A
Switching current 230 V AC3: 10 A
Switching current 400 V AC1: 10 A
Switching current 400 V AC3: 6 A
Fluorescent lamps: 16 AX
Ohmic load: 3680 W
Capacitive load: 16 A / 200 µF
Switching voltage DC: DC 12 ... 24 V
Switching current DC: 16 A
Min. switching current: 100 mA
Switch-on current 150 µs: 600 A
Switch-on current 600 µs: 300 A
Lamp loads
Incandescent lamps: 3680 W
HV halogen lamps: 3680 W
Inductive transformers with LV halogen lamps: 2000 VA
Electronic transformers with LV halogen lamps: 2500 W
Fluorescent lamps T5/T8
non-compensated: 3680 W
parallel compensated: 2500 W / 200 µF
lead-lag circuit: 3680 W / 200 µF
Compact fluorescent lamps
non-compensated: 3680 W
parallel compensated: 2500 W / 200 µF
Mercury vapour lamps
non-compensated: 3680 W
parallel compensated: 3680 W / 200 µF
Approvals: VDE

Manufacturer: JUNG
Ref.-no.: 2308.16 REGCHM

Íàçàä â ðàçäåë