225NVDE - Rotary dimmer insert 20 – 500 W/VA with 2-way push switch with potentiometer to adjust the minimum brightness - Quad Industry GmbH
 Rotary dimmer insert 20 – 500 W/VA with 2-way push switch with potentiometer to adjust the minimum brightness Intended use * Switching and dimming of incandescent lamps, HV halogen lamps as well as dimmable inductive transformers with halogen or LED lamps. * Switching and dimming of dimmable HV-LED lamps or compact fluorescent lamps * No mixed-load operation of HV LED and compact fluorescent lamps. All other specified load types can be used in mixed-load operation. * Installation in flush-box according to DIN 49073 Product characteristics * Dimming method: leading edge phase control * Short-circuit protection through fine-wire fuse * Electronic overtemperature protection * Satellite switching possible in combination with 2-way switch * Terminal A to output the switching status of the device to control automatic power disconnection or relay * Suitable amplifiers: 246 EB (max. 10) When using 246 EB, charge dimmer with minimum capacity! * Amplifiers cannot be used in combination with HV LED lamps and compact fluorescent lamps Transformers must be charged with at least 85 % of rated power with lamps. The total load of consumers, including power loss of transformer, must not exceed the maximum load. Technical data Rated voltage: AC 230 V ~, 50 Hz Connected load: max. 500 W/VA (flush-mounted) max. 450 W/VA (surface-mounted) Dimming method: leading edge phase control Lamp loads Incandescent lamps: 20 ... 500 W HV halogen lamps: 20 ... 500 W Inductive transformers: 20 ... 500 VA Dimmable HV LED lamps: typical 3 ... 100 W Dimmable compact fluorescent lamps: typical 3 ... 100 W Fuse, type: T 3.15 A H 250 V Connection: screwless connection Terminals for: 2.5 mm2 Approvals: VDE Manufacturer: JUNG Ref.-no.: 225 NVDE |
Назад в раздел
Клиенты
   
|
Quad Industry GmbH
GER + 49 (30) 994-049-88 E-mail: sales@quad-industry.com |